In this review, we will be comparing R-51PM and TSi100, two Bookshelf speakers from Klipsch and Polk Audio. The main difference between these two speakers is that the Klipsch R-51PM is a Powered speaker which means that it has a built-in amplifier inside the speaker body so you don't need an external power amp or an integrated amp whereas the Polk TSi100 is a Passive speaker so has to be matched with an amplifier to get any sound from it.
Let's have a brief look at the main features
of Klipsch R-51PM and Polk TSi100 first before getting into our more
detailed comparison.
Klipsch R-51PM Key Specs
- 2-way Design
- 120-watt RMS( 240-watt Peak) Integrated Amplifier
- 1.0" Tractrix Horn Tweeter
- 5.25" Copper-spun IMG Woofer
- 68-21k Hz Frequency Response
- 24-bit Max Depth / 96 kHz Max Sample Rate
- Built-in 3.0 Bluetooth
- Weight:4.80kg
- Dimensions (H x W x D): 330.2" x 7.0625" x 10.25"( 330.2 x 179.4 x 260.3mm )
Polk TSi100 Key Specs
- 2-way Design
- 1" Dome Tweeter
- 5.25" Organic Fiber Woofer
- 61-24k Hz Frequency Response
- 89 dB Sensitivity
- Impedance: 8ohms
- Power Range:20-100watts
- Weight:4.53kg
- Dimensions (H x W x D): 279.4" x 7.0" x 10.1"( 279.4 x 177.8 x 259.0mm )
In the following sections, we will get into more detail in order to better understand how the Klipsch R-51PM and Polk TSi100 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both R-51PM and TSi100 are 2-way speakers.
| Driver |
Klipsch R-51PM |
Polk TSi100 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1.0-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.25-inch
|
1 x 5.25-inch
|
R-51PM features a 1.0" Aluminum LTS Tractrix Horn Tweeter and 1 x 5.25" Copper-spun IMG Woofer with a Crossover frequency at 1663Hz. On the other hand, the TSi100 features a 1" Dome Tweeter and 1 x 5.25" Organic Fiber Woofer with a Crossover frequency at 2500Hz.
Frequency Response
R-51PM has a frequency range of 68-21k Hz whereas TSi100 has a frequency range of 61-24k Hz. With a minimum frequency of 61Hz, the TSi100 can go significantly deeper on the low side and provide stronger bass compared to the R-51PM's min frequency of 68Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Cabinet Type and Port Position
Both R-51PM and TSi100 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch R-51PM's and Polk TSi100's external dimensions. Klipsch R-51PM has external dimensions of 330.2 x 179.4 x 260.3mm ( 13 x 7.0625 x 10.25inch) whereas Polk TSi100 has external dimensions of 279.4 x 177.8 x 259.0mm ( 11.0 x 7.0 x 10.1inch) .
Klipsch R-51PM is clearly the larger of the two speakers. Its body is 1.6mm wider, 50.8mm taller and 1.3mm deeper than Polk TSi100.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch R-51PM is approximately 467.0cm2 / 72.4inch2 and base area of the Polk TSi100 is approximately 460.5cm2 / 71.4inch2. The R-51PM requires 1% more surface area than the TSi100 which gives it a small disadvantage on placement in tight spaces.
What's in the Box of Klipsch R-51PM?
Here are the items that are included inside the box of R-51PM:
Powered speaker (right)Passive speaker (left)2 Grilles68-inch AC power cordRemote control2
What's in the Box of Polk TSi100?
Here are the items that come with the TSi100:
2 Black bookshelf speakers Detachable cloth grille (installed) 8 Self-adhesive rubber feet Owner's Manual Wall-Mount template Online registration sheet Polk Audio product brochure