In this review, we will be comparing R-50C and Airmotiv C2+, two Passive Center Channel speakers from Klipsch and Emotiva. Let's have a brief look at the main features
of Klipsch R-50C and Emotiva Airmotiv C2+ first before getting into our more
detailed comparison.
What size room are the Klipsch R-50C and Emotiva Airmotiv C2+ speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Klipsch R-50C and Emotiva Airmotiv C2+ compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that R-50C is a 2-way design whereas the Airmotiv C2+ is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Driver |
Klipsch R-50C |
Emotiva Airmotiv C2+ |
Driver Setup
|
2-way
|
3-way
|
Tweeter
|
1-inch
|
25×32 mm-inch
|
Midrange
|
- |
2 x 3-inch |
Woofer
|
2 x 5.25-inch
|
2 x 6.5-inch
|
R-50C features a 1" LTS (Linear Travel Suspension) titanium diaphragm Tractrix Horn Tweeter and 2 x 5.25" spun-copper TCP Woofer with a Crossover frequency at 1650 Hz. On the other hand, the Airmotiv C2+ features a 25×32 mm" folded ribbon Tweeter , a 3" Midrange and 2 x 6.5" woven fiber cone Woofer with a Crossover frequency at 350 Hz and 3200Hz.
Frequency Response
R-50C has a frequency range of 90-21k Hz whereas Airmotiv C2+ has a frequency range of 45 Hz – 28 kHz. With a minimum frequency of 45Hz, the Airmotiv C2+ can go significantly deeper on the low side and provide stronger bass compared to the R-50C's min frequency of 90Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
R-50C is a 8 ohms speaker compared to the Airmotiv C2+ which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Airmotiv C2+ can provide this impedance level.
These two speakers also have different sensitivity levels. R-50C sensitivity is rated at 96 dB and the Airmotiv C2+'s is rated at 92 dB. This 4 dB difference makes the Klipsch R-50C a more sensitive speaker compared to Emotiva Airmotiv C2+, hence will play louder with the same amount of watts.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
R-50C can handle a max power of 150 watts RMS from the amp the whereas R-50C has a max power handling value of 100 watts RMS , 50 watts less than the Airmotiv C2+.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Airmotiv C2+ features Binding post posts which make bi-amping or bi-wiring possible. R-50C has a Binding post which doesn't feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch R-50C's and Emotiva Airmotiv C2+'s external dimensions. Klipsch R-50C has external dimensions of 180.0 x 478.0 x 212.0mm ( 7-1/16inch x 18-13/16inch x 8-5/16inch ) whereas Emotiva Airmotiv C2+ has external dimensions of 220.0 x 812.0 x 267.0mm ( 8-5/8 x 31-15/16 x 10-1/2inch) .
Emotiva Airmotiv C2+ is clearly the larger of the two speakers. Its body is 334mm wider, 40mm taller and 55mm deeper than Klipsch R-50C.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch R-50C is approximately 1013.4cm2 / 157.1inch2 and base area of the Emotiva Airmotiv C2+ is approximately 2168.0cm2 / 336.0inch2. The R-50C requires 53% less surface area than the Airmotiv C2+ which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Klipsch R-50C weighs 6.40kg / 14.1lbs and the Emotiva Airmotiv C2+ weighs 16.40kg / 36.1lbs. This makes the Airmotiv C2+ 156% heavier than the R-50C.
Here is a comparison of how R-50C and Airmotiv C2+'s weights compare with the average, max and min weights in Passive Center Channel class.
Weight
All Center Channel Speakers
What's in the Box of Klipsch R-50C?
Here are the items that are included inside the box of R-50C:
Center-channel loudspeakerGrilleUser ManualImportant Safety InstructionsWarranty Information
Sensitivity |
96 dB
vs
92 dB
|
Play louder with same amount of amplification power |
Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
Height |
180mm
vs
220mm
|
Easier to fit in smaller spaces |
Base Surface Area |
1013cm2 (478x212mm)
vs
2168cm2 (812x267mm)
|
Takes less floor space |
Price per pair* |
379USD
vs
499USD
|
costs less (*prices may change depending on the seller, location and time) |
Max Input Power |
150 watts
vs
100 watts
|
Handle more power from your amplifier |
Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
Low Frequency Response |
45 Hz
vs
90 Hz
|
Generates deeper bass |
High Frequency Response |
28k Hz
vs
21k Hz
|
Generates higher frequency |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
General |
Klipsch Reference R-50C |
Emotiva Airmotiv C2+ |
Brand |
Klipsch |
Emotiva |
Speaker Type |
Center channel speaker |
Center channel speaker |
Power Range |
up to 100 watts |
Up to 150 watts |
Sensitivity |
96 dB |
92 dB |
Impedance |
8 ohms |
4 ohms |
Impedance |
3.5 ohms |
n/a |
Frequency Response |
90-21k Hz |
45 Hz – 28 kHz |
Drivers |
|
|
Woofer Quantity |
2 |
2 |
Woofer Size |
5.25" |
6.5" |
Woofer Composition |
spun-copper TCP |
woven fiber cone |
Tweeter Size |
1" |
25×32 mm" |
Tweeter Type |
Tractrix Horn |
folded ribbon |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
3" |
Crossover Frequency |
1650 Hz |
350 Hz and 3200Hz |
Firing Direction |
n/a |
rear |
Physical Specs |
|
|
Height |
180.0mm (7.1") |
220.0mm (8.7") |
Width |
478.0mm (18.8") |
812.0mm (32") |
Depth |
212.0mm (8.3") |
267.0mm (10.5") |
Weight |
6.40kg (14.1lbs) |
16.40kg (36.1lbs) |
Enclosure |
Sealed |
Bass reflex |
Finish |
Textured Wood Grain Vinyl |
HDF |
Available Colors |
Black,White,Mocha |
Black |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |