In this review, we will be comparing R-30C and Blackstone TL1, two Passive Center Channel speakers from Klipsch and Polk Audio.
Let's have a brief look at the main features
of Klipsch R-30C and Polk TL1 first before getting into our more
detailed comparison.
Klipsch R-30C Key Specs
- 2-way Design
- 1" Tractrix Horn Tweeter
- 4 x 3.5" spun-copper TCP Woofer
- 78-21k Hz Frequency Response
- 96 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 100watts
- Weight:5.00kg
- Dimensions (H x W x D): 126.0" x 26-1/16" x 6-13/16"( 126.0 x 662.0 x 174.0mm )
Polk TL1 Key Specs
- 2-way Design
- 0.5" dome Tweeter
- 2 x 2.5" Dynamic Balance Woofer
- 125-20k Hz Frequency Response
- 89 dB Sensitivity
- Impedance: 8ohms
- Power Range:10-125watts
- Weight:1.84kg
- Dimensions (H x W x D): 101.0" x 15" x 3-7/16"( 101.0 x 381.0 x 88.0mm )
What size room are the Klipsch R-30C and Polk TL1 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Klipsch R-30C |
Polk TL1 |
| Near-field |
Average |
Poor |
| Small Room |
Good |
Average |
| Mid-size Room |
Average |
Good |
| Large Room |
Poor |
Average |
| Very Large Room |
Bad |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Klipsch R-30C and Polk TL1 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both R-30C and Blackstone TL1 are 2-way speakers.
| Driver |
Klipsch R-30C |
Polk TL1 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
0.5-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
4 x 3.5-inch
|
2 x 2.5-inch
|
R-30C features a 1" LTS (Linear Travel Suspension) titanium diaphragm Tractrix Horn Tweeter and 4 x 3.5" spun-copper TCP Woofer with a Crossover frequency at 1650 Hz. On the other hand, the Blackstone TL1 features a 0.5" silk dome Tweeter and 2 x 2.5" Dynamic Balance Woofer .
Frequency Response
R-30C has a frequency range of 78-21k Hz whereas Blackstone TL1 has a frequency range of 125-20k Hz. With a minimum frequency of 78Hz, the R-30C can go significantly deeper on the low side and provide stronger bass compared to the Blackstone TL1's min frequency of 125Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
R-30C and Blackstone TL1 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. R-30C sensitivity is rated at 96 dB and the Blackstone TL1's is at 89 dB. This 7 dB difference makes the Klipsch R-30C a more sensitive speaker compared to Polk TL1, hence will play louder with the same amount of watts.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
R-30C can handle a max power of 125 watts RMS from the amp the whereas R-30C has a max power handling value of 100 watts RMS , 25 watts less than the Blackstone TL1.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
R-30C features 5-Way post type posts and Blackstone TL1 has a 5-Way post type posts. None of these speakers feature bi-amping/bi-wiring.
Klipsch R-30C's Binding post terminals
Cabinet Type and Port Position
Both R-30C and Blackstone TL1 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch R-30C's and Polk TL1's external dimensions. Klipsch R-30C has external dimensions of 126.0 x 662.0 x 174.0mm ( 4-15/16inch x 26-1/16inch x 6-13/16inch ) whereas Polk TL1 has external dimensions of 101.0 x 381.0 x 88.0mm ( 3-15/16 x 15 x 3-7/16inch) .
Klipsch R-30C is clearly the larger of the two speakers. Its body is 281mm wider, 25mm taller and 86mm deeper than Polk TL1.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch R-30C is approximately 1151.9cm2 / 178.5inch2 and base area of the Polk TL1 is approximately 335.3cm2 / 52.0inch2. The R-30C requires 244% more surface area than the Blackstone TL1 which gives it a small disadvantage on placement in tight spaces.