In this review, we will be comparing RP-8000F II and Borea BR07, two Passive Floor-standing speakers from Klipsch and Triangle.
Let's have a brief look at the main features
of Klipsch RP-8000F II and Triangle Borea BR07 first before getting into our more
detailed comparison.
Klipsch RP-8000F II Key Specs
- 2-way Design
- 1" Tractrix Horn Tweeter
- 2 x 8" Cerametallic cone Woofer
- 32-25k Hz Frequency Response
- 98 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 150watts
- Weight:28.00kg
- Dimensions (H x W x D): 1097.0" x 10-7/8" x 17-9/16"( 1097.0 x 277.0 x 447.0mm )
Triangle Borea BR07 Key Specs
- 3-way Design
- 1" Break_in Tweeter
- 6" Midrange
- 6" fiberglass Woofer
- 6" Midrange
- 44 - 22k Hz Frequency Response
- 91 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 120watts
- Weight:16.92kg
- Dimensions (H x W x D): 980.0" x 8.1" x 12.3"( 980.0 x 206.0 x 314.0mm )
What size room are the Klipsch RP-8000F II and Triangle Borea BR07 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Klipsch RP-8000F II |
Triangle Borea BR07 |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Good |
Good |
| Large Room |
Good |
Good |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Klipsch RP-8000F II and Triangle Borea BR07 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that RP-8000F II is a 2-way design whereas the Borea BR07 is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Klipsch RP-8000F II |
Triangle Borea BR07 |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
1 x 6-inch |
|
Woofer
|
2 x 8-inch
|
1 x 6-inch
|
RP-8000F II features a 1" titanium Tractrix Horn Tweeter and 2 x 8" Cerametallic cone Woofer with a Crossover frequency at 1630 Hz. On the other hand, the Borea BR07 features a 1" silk Break_in Tweeter , a 6" Midrange and 1 x 6" fiberglass Woofer with a Crossover frequency at 350Hz and 3500Hz.
Frequency Response
RP-8000F II has a frequency range of 32-25k Hz whereas Borea BR07 has a frequency range of 44 - 22k Hz. With a minimum frequency of 32Hz, the RP-8000F II can go significantly deeper on the low side and provide stronger bass compared to the Borea BR07's min frequency of 44Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-8000F II and Borea BR07 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. RP-8000F II sensitivity is rated at 98 dB and the Borea BR07's is at 91 dB. This 7 dB difference makes the Klipsch RP-8000F II a more sensitive speaker compared to Triangle Borea BR07, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
RP-8000F II can handle a max power of 150 watts RMS from the amp the whereas Borea BR07 has a max power handling value of 120 watts RMS, 30 watts less than the RP-8000F II.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RP-8000F II features Binding post posts which make bi-amping or bi-wiring possible. Borea BR07 has a Binding post which doesn't feature bi-amping/bi-wiring.
Klipsch RP-8000F II's Binding post terminals allows Bi-amping or bi-wiring
Triangle Borea BR07's Binding post terminals
Cabinet Type and Port Position
RP-8000F II has a rear firing port whereas Borea BR07 has a front firing ports. Triangle Borea BR07's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Klipsch RP-8000F II with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-8000F II's and Triangle Borea BR07's external dimensions. Klipsch RP-8000F II has external dimensions of 1097.0 x 277.0 x 447.0mm ( 43-3/16 x 10-7/8 x 17-9/16inch) whereas Triangle Borea BR07 has external dimensions of 980.0 x 206.0 x 314.0mm ( 38.5 x 8.1 x 12.3inch) .
Klipsch RP-8000F II is clearly the larger of the two speakers. Its body is 71mm wider, 117mm taller and 133mm deeper than Triangle Borea BR07.
Below you can see the front view size comparison of Klipsch RP-8000F II and Triangle Borea BR07 in scale.
Comparison image of Klipsch RP-8000F II and Triangle Borea BR07 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-8000F II is approximately 1238.2cm2 / 191.9inch2 and base area of the Triangle Borea BR07 is approximately 646.8cm2 / 100.3inch2. The RP-8000F II requires 91% more surface area than the Borea BR07 which gives it a small disadvantage on placement in tight spaces.