In this review, we will be comparing RP-500M and L100 Classic, two Passive Bookshelf speakers from Klipsch and JBL.
Let's have a brief look at the main features
of Klipsch RP-500M and JBL L100 Classic first before getting into our more
detailed comparison.
Klipsch RP-500M Key Specs
- 2-way Design
- 1" Tractrix Horn Tweeter
- 5.25" Cerametallic Woofer
- 48-25k Hz Frequency Response
- 93 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 75watts
- Weight:5.40kg
- Dimensions (H x W x D): 343.0" x 6.8" x 9.4"( 343.0 x 173.0 x 241.0mm )
JBL L100 Classic Key Specs
- 3-way Design
- 1" Dome Tweeter
- 5.25" Midrange
- 12" Pulp Woofer
- 5.25" Midrange
- 40-40k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 4ohms
- Power Range:25-200watts
- Weight:26.70kg
- Dimensions (H x W x D): 636.5" x 15.3" x 14.6"( 636.5 x 389.6 x 371.5mm )
What size room are the Klipsch RP-500M and JBL L100 Classic speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Klipsch RP-500M |
JBL L100 Classic |
| Near-field |
Good |
Poor |
| Small Room |
Good |
Average |
| Mid-size Room |
Average |
Good |
| Large Room |
Poor |
Average |
| Very Large Room |
No way |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Klipsch RP-500M and JBL L100 Classic compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that RP-500M is a 2-way design whereas the L100 Classic is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Klipsch RP-500M |
JBL L100 Classic |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
1 x 5.25-inch |
|
Woofer
|
1 x 5.25-inch
|
1 x 12-inch
|
RP-500M features a 1" Tractrix Horn Tweeter and 1 x 5.25" Cerametallic Woofer with a Crossover frequency at 1500Hz. On the other hand, the L100 Classic features a 1" Titanium Dome Tweeter , a 5.25" Midrange and 1 x 12" Pulp Woofer with a Crossover frequency at 450Hz and 3500Hz.
Frequency Response
RP-500M has a frequency range of 48-25k Hz whereas L100 Classic has a frequency range of 40-40k Hz. With a minimum frequency of 40Hz, the L100 Classic can go significantly deeper on the low side and provide stronger bass compared to the RP-500M's min frequency of 48Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-500M is a 8 ohms speaker compared to the L100 Classic which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the L100 Classic can provide this impedance level.
These two speakers also have different sensitivity levels. RP-500M sensitivity is rated at 93 dB and the L100 Classic's is rated at 90 dB. This 3 dB difference makes the Klipsch RP-500M a more sensitive speaker compared to JBL L100 Classic, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
RP-500M can handle a max power of 200 watts RMS from the amp the whereas RP-500M has a max power handling value of 75 watts RMS , 125 watts less than the L100 Classic.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RP-500M features Five-way gold-plated binding posts type posts and L100 Classic has a Five-way gold-plated binding posts type posts. None of these speakers feature bi-amping/bi-wiring.
Klipsch RP-500M's Single binding posts terminals
JBL L100 Classic's Five-way gold-plated binding posts terminals
Cabinet Type and Port Position
RP-500M has a rear firing port whereas L100 Classic has a front firing ports. JBL L100 Classic's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Klipsch RP-500M with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-500M's and JBL L100 Classic's external dimensions. Klipsch RP-500M has external dimensions of 343.0 x 173.0 x 241.0mm ( 13.5 x 6.8 x 9.4inch) whereas JBL L100 Classic has external dimensions of 636.5 x 389.6 x 371.5mm ( 25.0 x 15.3 x 14.6inch) .
JBL L100 Classic is clearly the larger of the two speakers. Its body is 216.6mm wider, 293.5mm taller and 130.5mm deeper than Klipsch RP-500M.
Below you can see the front view size comparison of Klipsch RP-500M and JBL L100 Classic in scale.
Comparison image of Klipsch RP-500M and JBL L100 Classic Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-500M is approximately 416.9cm2 / 64.6inch2 and base area of the JBL L100 Classic is approximately 1447.4cm2 / 224.3inch2. The RP-500M requires 71% less surface area than the L100 Classic which gives it a small advantage on placement in tight spaces.