In this review, we will be comparing AK6 and R-610F, two Passive Floor-standing speakers by Klipsch Let's have a brief look at the main features
of Klipsch Klipschorn AK6 and Klipsch R-610F first before getting into our more
detailed comparison.
In the following sections, we will get into more detail in order to better understand how the Klipsch Klipschorn AK6 and Klipsch R-610F compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that AK6 is a 3-way design whereas the R-610F is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Klipsch Klipschorn AK6 |
Klipsch R-610F |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
1-inch
|
1.0-inch
|
|
Midrange
|
1 x 2-inch |
- |
|
Woofer
|
1 x 15-inch
|
1 x 6.5-inch
|
AK6 features a 1" polyimide diaphragm compression Tractrix horn Tweeter , a 2" Midrange and 1 x 15" fiber-composite with a trihedral exponential folded horn Woofer . On the other hand, the R-610F features a 1.0" Tweeter and 1 x 6.5" Copper-spun IMG Woofer .
Frequency Response
AK6 has a frequency range of 33-20k Hz whereas R-610F has a frequency range of 45-21k Hz. With a minimum frequency of 33Hz, the AK6 can go significantly deeper on the low side and provide stronger bass compared to the R-610F's min frequency of 45Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
AK6 and R-610F have the same Impedance of 8 ohms but where they differ is the sensitivity levels. AK6 sensitivity is rated at 105 dB and the R-610F's is at 94 dB. This 11 dB difference makes the Klipsch Klipschorn AK6 a more sensitive speaker compared to Klipsch R-610F, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
AK6 can handle a max power of 100 watts RMS from the amp the whereas R-610F has a max power handling value of 85 watts RMS, 15 watts less than the AK6.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
AK6 features Binding post posts which make bi-amping or bi-wiring possible. R-610F has a Post which doesn't feature bi-amping/bi-wiring.
Klipsch R-610F's Post terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch Klipschorn AK6's and Klipsch R-610F's external dimensions. Klipsch Klipschorn AK6 has external dimensions of 1347.0 x 794.0 x 718.0mm ( 53 x 31-1/4 x 28-1/4inch) whereas Klipsch R-610F has external dimensions of 942.0 x 239.0 x 369.0mm ( 37-1/16 x 9-3/8 x 14-1/2inch) .
Klipsch Klipschorn AK6 is clearly the larger of the two speakers. Its body is 555mm wider, 405mm taller and 349mm deeper than Klipsch R-610F.
Below you can see the front view size comparison of Klipsch Klipschorn AK6 and Klipsch R-610F in scale.
Comparison image of Klipsch Klipschorn AK6 and Klipsch R-610F Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch Klipschorn AK6 is approximately 5700.9cm2 / 883.6inch2 and base area of the Klipsch R-610F is approximately 881.9cm2 / 136.7inch2. The AK6 requires 546% more surface area than the R-610F which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Klipsch Klipschorn AK6 weighs 100.00kg / 220lbs and the Klipsch R-610F weighs 16.36kg / 36lbs. This makes the AK6 511% heavier than the R-610F.
Here is a comparison of how AK6 and R-610F's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Klipsch Klipschorn AK6?
Here are the items that are included inside the box of AK6:
2 Loudspeaker cabinets2 Subwoofer cabinets2 GrillesOwners ManualCongratulations letterKlipsch brochure
What's in the Box of Klipsch R-610F?
Here are the items that come with the R-610F:
Floorstanding loudspeakerGrille (installed)2 Feet4 ScrewsQuick Setup GuideImportant Safety InstructionsWarranty InformationLoudspeaker Feet note
 Max Input Power |
100 watts
vs
85 watts
|
Handle more power from your amplifier |
 Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
 Sensitivity |
105 dB
vs
94 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
15 inches
vs
6.5 inches
|
Larger woofer |
| Low Frequency Response |
33 Hz
vs
45 Hz
|
Generates deeper bass |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 High Frequency Response |
21k Hz
vs
20k Hz
|
Generates higher frequency |
 Height |
942mm
vs
1347mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
881cm2 (239x369mm)
vs
5700cm2 (794x718mm)
|
Takes less floor space |
 Price per pair* |
778USD
vs
16498USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Klipsch Heritage Klipschorn AK6 |
Klipsch Reference R-610F |
| Brand |
Klipsch |
Klipsch |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
up to 100 watts |
up to 85 watts |
| Sensitivity |
105 dB |
94 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
33-20k Hz |
45-21k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
15" |
6.5" |
| Woofer Composition |
fiber-composite with a trihedral exponential folded horn |
Copper-spun IMG |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1.0" |
| Tweeter Type |
Tractrix horn |
n/a |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
2" |
No |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
1347.0mm (53") |
942.0mm (37.1") |
| Width |
794.0mm (31.3") |
239.0mm (9.4") |
| Depth |
718.0mm (28.3") |
369.0mm (14.5") |
| Weight |
100.00kg (220lbs) |
16.36kg (36lbs) |
| Enclosure |
Acoustic Suspension |
Bass Reflex |
| Finish |
MDF/Wood veneer |
MDF/Wood-grain vinyl |
| Available Colors |
Black |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
No |
Other |
|
|
| Parts Warranty |
10 Years |
5 Years |
| Labor Warranty |
10 Years |
5 Years |