In this review, we will be comparing YU2 and TUK, two Powered Bookshelf speakers by Kanto Being Powered speakers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them.
Let's have a brief look at the main features
of Kanto YU2 and Kanto TUK first before getting into our more
detailed comparison.
Kanto YU2 Key Specs
- 2-way Design
- 50-watt RMS( 100-watt Peak) Integrated Amplifier
- 0.75" Soft-Dome Tweeter
- 3" Kevlar Woofer
- 80-20k Hz Frequency Response
- 24-bit Max Depth / 96 kHz Max Sample Rate
- Weight:1.30kg
- Dimensions (H x W x D): 150.0" x 3.9" x 5.3"( 150.0 x 100.0 x 135.0mm )
Kanto TUK Key Specs
- 2-way Design
- 130-watt RMS( 260-watt Peak) Integrated Amplifier
- 1.0625 x 1.375" AMT Tweeter
- 5.25" Aluminum Woofer
- 50-20k Hz Frequency Response
- 24-bit Max Depth / 96 kHz Max Sample Rate
- Weight:4.50kg
- Dimensions (H x W x D): 277.8" x 7.06" x 10.9"( 277.8 x 179.4 x 276.2mm )
In the following sections, we will get into more detail in order to better understand how the Kanto YU2 and Kanto TUK compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both YU2 and TUK are 2-way speakers.
| Driver |
Kanto YU2 |
Kanto TUK |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
0.75-inch
|
1.0625 x 1.375-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 3-inch
|
1 x 5.25-inch
|
YU2 features a 0.75" Silk Soft-Dome Tweeter and 1 x 3" Kevlar Woofer . On the other hand, the TUK features a 1.0625 x 1.375" Folded ribbon AMT Tweeter and 1 x 5.25" Aluminum Woofer .
Frequency Response
YU2 has a frequency range of 80-20k Hz whereas TUK has a frequency range of 50-20k Hz. With a minimum frequency of 50Hz, the TUK can go significantly deeper on the low side and provide stronger bass compared to the YU2's min frequency of 80Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Kanto YU2's and Kanto TUK's external dimensions. Kanto YU2 has external dimensions of 150.0 x 100.0 x 135.0mm ( 5.90 x 3.9 x 5.3inch) whereas Kanto TUK has external dimensions of 277.8 x 179.4 x 276.2mm ( 10.9 x 7.06 x 10.9inch) .
Kanto TUK is clearly the larger of the two speakers. Its body is 79.4mm wider, 127.8mm taller and 141.2mm deeper than Kanto YU2.
Below you can see the front view size comparison of Kanto YU2 and Kanto TUK in scale.
Comparison image of Kanto YU2 and Kanto TUK Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Kanto YU2 is approximately 135.0cm2 / 20.9inch2 and base area of the Kanto TUK is approximately 495.5cm2 / 76.8inch2. The YU2 requires 73% less surface area than the TUK which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Kanto YU2 and Kanto TUK on a Media Console