In this review, we will be comparing R6 Meta and Kanta Center, two Passive Center Channel speakers from KEF and Focal. Let's have a brief look at the main features
of KEF R6 Meta and Focal Kanta Center first before getting into our more
detailed comparison.
What size room are the KEF R6 Meta and Focal Kanta Center speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the KEF R6 Meta and Focal Kanta Center compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that R6 Meta is a 3-way design whereas the Kanta Center is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Driver |
KEF R6 Meta |
Focal Kanta Center |
Driver Setup
|
3-way
|
2-way
|
Tweeter
|
1-inch
|
1.1-inch
|
Midrange
|
1 x 5-inch |
- |
Woofer
|
2 x 6.5-inch
|
2 x 6.5-inch
|
R6 Meta features a 1" Aluminum with MAT absorber Hard-Dome Tweeter , a 5" Midrange and 2 x 6.5" Hybrid Aluminum Woofer with a Crossover frequency at 500Hz and 2400Hz. On the other hand, the Kanta Center features a 1.1" IAL3 Beryllium Hard-Dome Tweeter and 2 x 6.5" flax cone with TMD (Tuned Mass Damping) suspension Woofer with a Crossover frequency at 2400 Hz.
Frequency Response
R6 Meta has a frequency range of 65-28k Hz whereas Kanta Center has a frequency range of 55-44k Hz. With a minimum frequency of 55Hz, the Kanta Center can go significantly deeper on the low side and provide stronger bass compared to the R6 Meta's min frequency of 65Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
R6 Meta is a 4 ohms speaker compared to the Kanta Center which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the R6 Meta can provide this impedance level.
These two speakers also have different sensitivity levels. R6 Meta sensitivity is rated at 88 dB and the Kanta Center's is rated at 92 dB. This 4 dB difference makes the Focal Kanta Center a more sensitive speaker compared to KEF R6 Meta, hence will play louder with the same amount of watts.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
R6 Meta can handle a max power of 250 watts RMS from the amp the whereas Kanta Center has a max power handling value of 200 watts RMS, 50 watts less than the R6 Meta.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
R6 Meta features Custom 5-way bi-wire tool-less binding posts posts which make bi-amping or bi-wiring possible. Kanta Center has a Binding post which doesn't feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF R6 Meta's and Focal Kanta Center's external dimensions. KEF R6 Meta has external dimensions of 202.0 x 626.0 x 339.0mm ( 7-15/16-inch x 24-5/8-inch x 13-5/16-inch) whereas Focal Kanta Center has external dimensions of 247.0 x 562.0 x 394.0mm ( 9-11/16inch x 22-1/8inch x 15-1/2inch ) .
KEF R6 Meta is 45mm shorter and 55mm less deeper than Focal Kanta Center but it is also 64mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF R6 Meta is approximately 2122.1cm2 / 328.9inch2 and base area of the Focal Kanta Center is approximately 2214.3cm2 / 343.2inch2. The R6 Meta requires 4% less surface area than the Kanta Center which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The KEF R6 Meta weighs 17.82kg / 39.2lbs and the Focal Kanta Center weighs 18.00kg / 39.6lbs. This makes the Kanta Center 1% heavier than the R6 Meta.
Here is a comparison of how R6 Meta and Kanta Center's weights compare with the average, max and min weights in Passive Center Channel class.
Weight
All Center Channel Speakers
What's in the Box of KEF R6 Meta?
Here are the items that are included inside the box of R6 Meta:
1 R2 Meta 1 microfiber grille Rubber feet User manual and warranty information
What's in the Box of Focal Kanta Center?
Here are the items that come with the Kanta Center:
Center-channel loudspeaker2 Grilles4 Slicone padsUser Manual
Max Input Power |
250 watts
vs
200 watts
|
Handle more power from your amplifier |
Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Height |
202mm
vs
247mm
|
Easier to fit in smaller spaces |
Base Surface Area |
2122cm2 (626x339mm)
vs
2214cm2 (562x394mm)
|
Takes less floor space |
Price per pair* |
1999USD
vs
3999USD
|
costs less (*prices may change depending on the seller, location and time) |
Sensitivity |
92 dB
vs
88 dB
|
Play louder with same amount of amplification power |
Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
Minimum Impedance |
3.5 ohms
vs
3.2 ohms
|
Very low impedance levels puts more pressure on amplifier |
Low Frequency Response |
55 Hz
vs
65 Hz
|
Generates deeper bass |
High Frequency Response |
44k Hz
vs
28k Hz
|
Generates higher frequency |
General |
KEF R6 Meta |
Focal Kanta Center |
Brand |
KEF |
Focal |
Speaker Type |
Center channel speaker |
Center channel speaker |
Power Range |
15-250 watts |
40-200 watts |
Sensitivity |
88 dB |
92 dB |
Impedance |
4 ohms |
8 ohms |
Impedance |
3.2 ohms |
3.5 ohms |
Frequency Response |
65-28k Hz |
55-44k Hz |
Drivers |
|
|
Woofer Quantity |
2 |
2 |
Woofer Size |
6.5" |
6.5" |
Woofer Composition |
Hybrid Aluminum |
flax cone with TMD (Tuned Mass Damping) suspension |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1.1" |
Tweeter Type |
Hard-Dome |
Hard-Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
5" |
No |
Crossover Frequency |
500Hz and 2400Hz |
2400 Hz |
Firing Direction |
n/a |
rear |
Physical Specs |
|
|
Height |
202.0mm (8") |
247.0mm (9.7") |
Width |
626.0mm (24.6") |
562.0mm (22.1") |
Depth |
339.0mm (13.3") |
394.0mm (15.5") |
Weight |
17.82kg (39.2lbs) |
18.00kg (39.6lbs) |
Enclosure |
Sealed |
Bass Reflex |
Finish |
n/a |
Multi-ply/Polymer/Veneer |
Available Colors |
Black Gloss, White Gloss, Walnut |
High-Gloss Carrara White,High-Gloss Black/Deep Black,Matte Walnut/Dark Grey,Matte Walnut/Ivory |
Grille |
n/a |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
No |
Other |
|
|
Parts Warranty |
5 years |
5 Years |
Labor Warranty |
5 years |
5 Years |