In this review, we will be comparing Q150 and S 803, two Passive Bookshelf speakers from KEF and Jamo. Let's have a brief look at the main features
of KEF Q150 and Jamo S 803 first before getting into our more
detailed comparison.
KEF Q150 Key Specs
- 2-way Design
- 11th Generation Uni-Q Driver
- 1" Dome Tweeter
- 5.25" Aluminum Woofer
- 51-28k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 8ohms
- Power Range:10-100watts
- Weight:5.60kg
- Dimensions (H x W x D): 303.0" x 7.0" x 10.9"( 303.0 x 180.0 x 278.0mm )
Jamo S 803 Key Specs
- 2-way Design
- 1" Soft-Dome Tweeter
- 5" Aluminized Polyfiber Woofer
- 57-26k Hz Frequency Response
- 87 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 80watts
- Weight:5.40kg
- Dimensions (H x W x D): 353.0" x 7.5" x 9.9"( 353.0 x 191.0 x 252.0mm )
What size room are the KEF Q150 and Jamo S 803 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
Listening Environment* |
KEF Q150 |
Jamo S 803 |
Near-field |
Average |
Average |
Small Room |
Good |
Good |
Mid-size Room |
Average |
Average |
Large Room |
Poor |
Poor |
Very Large Room |
Bad |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the KEF Q150 and Jamo S 803 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Q150 and S 803 are 2-way speakers.
Driver |
KEF Q150 |
Jamo S 803 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 5.25-inch
|
1 x 5-inch
|
Q150 features a 1" vented aluminum Dome Tweeter and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 2500Hz. On the other hand, the S 803 features a 1" Soft-Dome Tweeter and 1 x 5" Aluminized Polyfiber Woofer .
Frequency Response
Q150 has a frequency range of 51-28k Hz whereas S 803 has a frequency range of 57-26k Hz. With a minimum frequency of 51Hz, the Q150 can go significantly deeper on the low side and provide stronger bass compared to the S 803's min frequency of 57Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Q150 and S 803 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Q150 sensitivity is rated at 86 dB and the S 803's is at 87 dB. This 1 dB difference makes the Jamo S 803 a more sensitive speaker compared to KEF Q150, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Q150 can handle a max power of 100 watts RMS from the amp the whereas S 803 has a max power handling value of 80 watts RMS, 20 watts less than the Q150.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Q150 features Post type posts and S 803 has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Q150 has a rear firing port whereas S 803 has a front firing ports. Jamo S 803's front-firing port gives more flexibility in placement in regards to proximity to walls compared to KEF Q150 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF Q150's and Jamo S 803's external dimensions. KEF Q150 has external dimensions of 303.0 x 180.0 x 278.0mm ( 11.9 x 7.0 x 10.9inch) whereas Jamo S 803 has external dimensions of 353.0 x 191.0 x 252.0mm ( 13.8 x 7.5 x 9.9inch) .
KEF Q150 is 11mm narrower and 50mm shorter than Jamo S 803 but it is also 26mm deeper.
Below you can see the front view size comparison of KEF Q150 and Jamo S 803 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF Q150 is approximately 500.4cm2 / 77.6inch2 and base area of the Jamo S 803 is approximately 481.3cm2 / 74.6inch2. The Q150 requires 4% more surface area than the S 803 which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The KEF Q150 weighs 5.60kg / 12.3lbs and the Jamo S 803 weighs 5.40kg / 11.9lbs. This makes the Q150 4% heavier than the S 803.
Here is a comparison of how Q150 and S 803's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of KEF Q150?
Here are the items that are included inside the box of Q150:
2 Bookshelf loudspeakers 2 Foam port plugs 8 Self-adhesive rubber feet Owner's Manual Warranty Registration Card
What's in the Box of Jamo S 803?
Here are the items that come with the S 803:
2 Bookshelf loudspeakers 2 Grilles User Manual Important Safety Instructions Warranty Information