In this review, we will be comparing LS50C Meta and ES30, two Passive Center Channel speakers from KEF and Polk Audio. Let's have a brief look at the main features
of KEF LS50C Meta and Polk ES30 first before getting into our more
detailed comparison.
What size room are the KEF LS50C Meta and Polk ES30 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the KEF LS50C Meta and Polk ES30 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both LS50C Meta and ES30 are 2-way speakers.
| Driver |
KEF LS50C Meta |
Polk ES30 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.25-inch
|
2 x 5.5-inch
|
LS50C Meta features a 1" Aluminum Vented dome Tweeter and 1 x 5.25" aluminum Woofer with a Crossover frequency at 2100Hz. On the other hand, the ES30 features a 1" Terylene High-res dome Tweeter and 2 x 5.5" mica-reinforced polypropylene Dynamic Balance Woofer .
Frequency Response
LS50C Meta has a frequency range of 79-28k Hz whereas ES30 has a frequency range of 55-40k Hz. With a minimum frequency of 55Hz, the ES30 can go significantly deeper on the low side and provide stronger bass compared to the LS50C Meta's min frequency of 79Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
LS50C Meta and ES30 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. LS50C Meta sensitivity is rated at 85 dB and the ES30's is at 89 dB. This 4 dB difference makes the Polk ES30 a more sensitive speaker compared to KEF LS50C Meta, hence will play louder with the same amount of watts.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
LS50C Meta can handle a max power of 125 watts RMS from the amp the whereas LS50C Meta has a max power handling value of 100 watts RMS , 25 watts less than the ES30.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
LS50C Meta features 5-Way post type posts and ES30 has a 5-Way post type posts. None of these speakers feature bi-amping/bi-wiring.
KEF LS50C Meta's Binding post terminals
Polk ES30's 5-Way post terminals
Cabinet Type and Port Position
Both LS50C Meta and ES30 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
KEF LS50C Meta off-set flexible Port
Polk ES30 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF LS50C Meta's and Polk ES30's external dimensions. KEF LS50C Meta has external dimensions of 301.0 x 201.0 x 281.0mm ( 11-13/16 x 7-7/8 x 11-1/16inch) whereas Polk ES30 has external dimensions of 191.0 x 510.0 x 270.0mm ( 7-1/2 x 20-1/16 x 10-5/8inch) .
Polk ES30 is 110mm shorter and 11mm less deeper than KEF LS50C Meta but it is also 309mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF LS50C Meta is approximately 564.8cm2 / 87.5inch2 and base area of the Polk ES30 is approximately 1377.0cm2 / 213.4inch2. The LS50C Meta requires 59% less surface area than the ES30 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The KEF LS50C Meta weighs 7.82kg / 17.2lbs and the Polk ES30 weighs 8.64kg / 19lbs. This makes the ES30 10% heavier than the LS50C Meta.
Here is a comparison of how LS50C Meta and ES30's weights compare with the average, max and min weights in Passive Center Channel class.
Weight
All Center Channel Speakers
What's in the Box of KEF LS50C Meta?
Here are the items that are included inside the box of LS50C Meta:
Center-channel loudspeakerFoam port plug4 Self-adhesive rubber feetOwners ManualWarranty Registration Card
What's in the Box of Polk ES30?
Here are the items that come with the ES30:
Center-channel loudspeakerGrille (attached)4 Self-adhesive rubber feetOwners ManualOnline Product Registration
 Base Surface Area |
564cm2 (201x281mm)
vs
1377cm2 (510x270mm)
|
Takes less floor space |
 Max Input Power |
125 watts
vs
100 watts
|
Handle more power from your amplifier |
 Sensitivity |
89 dB
vs
85 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
5.5 inches
vs
5.25 inches
|
Larger woofer |
| Number of Woofers |
2
vs
1
|
More woofers |
| Low Frequency Response |
55 Hz
vs
79 Hz
|
Generates deeper bass |
 High Frequency Response |
40k Hz
vs
28k Hz
|
Generates higher frequency |
 Height |
191mm
vs
301mm
|
Easier to fit in smaller spaces |
 Price per pair* |
299USD
vs
900USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
KEF LS50C Meta |
Polk Audio Signature Elite ES30 |
| Brand |
KEF |
Polk Audio |
| Speaker Type |
Center channel speaker |
Center channel speaker |
| Power Range |
40-100 watts |
20-125 watts |
| Sensitivity |
85 dB |
89 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
3.5 ohms |
n/a |
| Frequency Response |
79-28k Hz |
55-40k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
2 |
| Woofer Size |
5.25" |
5.5" |
| Woofer Composition |
aluminum |
mica-reinforced polypropylene Dynamic Balance |
| Woofer Surround Material |
Rubber |
n/a |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Vented dome |
High-res dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
N/A" |
| Crossover Frequency |
2100Hz |
n/a |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
301.0mm (11.9") |
191.0mm (7.5") |
| Width |
201.0mm (7.9") |
510.0mm (20.1") |
| Depth |
281.0mm (11.1") |
270.0mm (10.6") |
| Weight |
7.82kg (17.2lbs) |
8.64kg (19lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF, Wood-grain vinyl |
| Available Colors |
Grey |
Black, Walnut, White |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |