In this review, we will be comparing S 803 and 3020i, two Passive Bookshelf speakers from Jamo and Q Acoustics. Let's have a brief look at the main features
of Jamo S 803 and Q Acoustics 3020i first before getting into our more
detailed comparison.
What size room are the Jamo S 803 and Q Acoustics 3020i speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Jamo S 803 and Q Acoustics 3020i compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both S 803 and 3020i are 2-way speakers.
Driver |
Jamo S 803 |
Q Acoustics 3020i |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
0.9-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 5-inch
|
1 x 5-inch
|
S 803 features a 1" Soft-Dome Tweeter and 1 x 5" Aluminized Polyfiber Woofer . On the other hand, the 3020i features a 0.9" decoupled Tweeter and 1 x 5" Coated paper Woofer with a Crossover frequency at 2400Hz and 2400Hz.
Frequency Response
S 803 has a frequency range of 57-26k Hz whereas 3020i has a frequency range of 64-30k Hz. With a minimum frequency of 46Hz, the 3020i can go significantly deeper on the low side and provide stronger bass compared to the S 803's min frequency of 57Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
S 803 is a 8 ohms speaker compared to the 3020i which has a nominal impedance of 6 ohms.
These two speakers also have different sensitivity levels. S 803 sensitivity is rated at 87 dB and the 3020i's is rated at 88 dB. This 1 dB difference makes the Q Acoustics 3020i a more sensitive speaker compared to Jamo S 803, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
S 803 can handle a max power of 80 watts RMS from the amp the whereas 3020i has a max power handling value of 75 watts RMS, 5 watts less than the S 803.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
S 803 features Post type posts and 3020i has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
S 803 has a front firing port whereas 3020i has a rear firing ports. Jamo S 803's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Q Acoustics 3020i with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Jamo S 803's and Q Acoustics 3020i's external dimensions. Jamo S 803 has external dimensions of 353.0 x 191.0 x 252.0mm ( 13.8 x 7.5 x 9.9inch) whereas Q Acoustics 3020i has external dimensions of 278.0 x 170.0 x 282.0mm ( 10.9 x 6.6 x 11.1inch) .
Q Acoustics 3020i is 21mm narrower and 75mm shorter than Jamo S 803 but it is also 30mm deeper.
Below you can see the front view size comparison of Jamo S 803 and Q Acoustics 3020i in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Jamo S 803 is approximately 481.3cm2 / 74.6inch2 and base area of the Q Acoustics 3020i is approximately 479.4cm2 / 74.3inch2. The S 803 requires 0% more surface area than the 3020i which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Jamo S 803 weighs 5.40kg / 11.9lbs and the Q Acoustics 3020i weighs 4.80kg / 10.6lbs. This makes the S 803 13% heavier than the 3020i.
Here is a comparison of how S 803 and 3020i's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Jamo S 803?
Here are the items that are included inside the box of S 803:
2 Bookshelf loudspeakers 2 Grilles User Manual Important Safety Instructions Warranty Information
What's in the Box of Q Acoustics 3020i?
Here are the items that come with the 3020i:
2 x 3020i bookshelf speakers 2 x Foam Bungs 2 x Speaker Grilles 1 x User Manual 1 x Handling Gloves 8 x Rubber Speaker Grips
Max Input Power |
80 watts
vs
75 watts
|
Handle more power from your amplifier |
Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
Price per pair* |
229USD
vs
399USD
|
costs less (*prices may change depending on the seller, location and time) |
Sensitivity |
88 dB
vs
87 dB
|
Play louder with same amount of amplification power |
Low Frequency Response |
46 Hz
vs
57 Hz
|
Generates deeper bass |
High Frequency Response |
30k Hz
vs
26k Hz
|
Generates higher frequency |
Height |
278mm
vs
353mm
|
Easier to fit in smaller spaces |
Base Surface Area |
479cm2 (170x282mm)
vs
481cm2 (191x252mm)
|
Takes less floor space |
General |
Jamo S 803 |
Q Acoustics 3020i |
Brand |
Jamo |
Q Acoustics |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
up to 80 watts |
25-75 watts |
Sensitivity |
87 dB |
88 dB |
Impedance |
8 ohms |
6 ohms |
Impedance |
n/a |
4 ohms |
Frequency Response |
57-26k Hz |
64-30k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
5" |
5" |
Woofer Composition |
Aluminized Polyfiber |
Coated paper |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
0.9" |
Tweeter Type |
Soft-Dome |
decoupled |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
n/a |
2400Hz and 2400Hz |
Firing Direction |
front |
rear |
Physical Specs |
|
|
Height |
353.0mm (13.9") |
278.0mm (10.9") |
Width |
191.0mm (7.5") |
170.0mm (6.7") |
Depth |
252.0mm (9.9") |
282.0mm (11.1") |
Weight |
5.40kg (11.9lbs) |
4.80kg (10.6lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Vinyl |
n/a |
Available Colors |
Walnut, Black, White |
Walnut, Black, White, Grey |
Mounting Bracket |
No |
No |
Recommended Stand Height |
24-28" |
n/a |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
No |
Other |
|
|
Parts Warranty |
5 Years |
4 Years |
Labor Warranty |
5 Years |
4 Years |