In this review, we will be comparing Studio 6 88LCR and B28W, two Passive In-wall speakers from JBL and Revel.
Let's have a brief look at the main features
of JBL Studio 6 88LCR and Revel B28W first before getting into our more
detailed comparison.
JBL Studio 6 88LCR Key Specs
- 2-way Design
- 1" Horn-Loaded Tweeter
- 2 x 8" PolyPlas Woofer
- 43-20kHz Frequency Response
- 96 dB Sensitivity
- Impedance: 6ohms
- Power Range:10-175watts
- Dimensions (H x W x D): 520.0" x 8.7500" x 3.7500"( 520.0 x 223.0 x 96.0mm )
Revel B28W Key Specs
- 1-way Design
- " Tweeter
- 2 x 8" Polymer-coated aluminum Woofer
- 36-150Hz Frequency Response
- 0 dB Sensitivity
- Impedance: 8ohms
- Power Range:350watts
- Dimensions (H x W x D): 597.0" x 14.5000" x 4.0000"( 597.0 x 369.0 x 102.0mm )
What size room are the JBL Studio 6 88LCR and Revel B28W speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
JBL Studio 6 88LCR |
Revel B28W |
| Near-field |
Poor |
Are you nuts? |
| Small Room |
Average |
Bad |
| Mid-size Room |
Good |
Poor |
| Large Room |
Average |
Good |
| Very Large Room |
Poor |
Good |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the JBL Studio 6 88LCR and Revel B28W compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Studio 6 88LCR is a 2-way design whereas the B28W is a 1-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
JBL Studio 6 88LCR |
Revel B28W |
|
Driver Setup
|
2-way
|
1-way
|
|
Tweeter
|
1-inch
|
-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 8-inch
|
2 x 8-inch
|
Studio 6 88LCR features a 1" Horn-Loaded Tweeter and 2 x 8" PolyPlas Woofer . On the other hand, the B28W features a " Tweeter and 2 x 8" Polymer-coated aluminum Woofer .
Frequency Response
Studio 6 88LCR has a frequency range of 43-20kHz whereas B28W has a frequency range of 36-150Hz. With a minimum frequency of 36Hz, the B28W can go significantly deeper on the low side and provide stronger bass compared to the Studio 6 88LCR's min frequency of 43Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the In-wall class in our database.
Low Frequency
In-wall Speakers
High Frequency
In-wall Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Studio 6 88LCR is a 6 ohms speaker compared to the B28W which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. Studio 6 88LCR sensitivity is rated at 96 dB and the B28W's is rated at 0 dB. This 96 dB difference makes the JBL Studio 6 88LCR a more sensitive speaker compared to Revel B28W, hence will play louder with the same amount of watts.
Sensitivity
In-wall Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Studio 6 88LCR can handle a max power of 350 watts RMS from the amp the whereas Studio 6 88LCR has a max power handling value of 175 watts RMS , 175 watts less than the B28W.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Studio 6 88LCR features Spring post type posts and B28W has a Spring post type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare JBL Studio 6 88LCR's and Revel B28W's external dimensions. JBL Studio 6 88LCR has external dimensions of 520.0 x 223.0 x 96.0mm ( 20.4375-inch x 8.7500-inch x 3.7500-inch) whereas Revel B28W has external dimensions of 597.0 x 369.0 x 102.0mm ( 23.5000-inch x 14.5000-inch x 4.0000-inch) .
Revel B28W is clearly the larger of the two speakers. Its body is 146mm wider, 77mm taller and 6mm deeper than JBL Studio 6 88LCR.
What's in the Box of JBL Studio 6 88LCR?
Here are the items that are included inside the box of Studio 6 88LCR:
In-wall loudspeakerGrilleCut-Out TemplateQuick Start Guide
What's in the Box of Revel B28W?
Here are the items that come with the B28W:
In-wall subwooferGrille8 Screws8 Washers8 IsolatorsOwners Manual