In this review, we will be comparing Genelec G Three and TUK, two Powered Bookshelf speakers from Genelec and Kanto. Being Powered speakers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them.
Let's have a brief look at the main features
of Genelec G Three and Kanto TUK first before getting into our more
detailed comparison.
Genelec G Three Key Specs
- 2-way Design
- 100-watt RMS Integrated Amplifier
- 0.75" Dome Tweeter
- 5.1" Cone Woofer
- 54-20k Hz Frequency Response
- N/A Max Depth / N/A Max Sample Rate
- Weight:5.00kg
- Dimensions (H x W x D): 299.0" x 7.4" x 7"( 299 x 189 x 178 mm )
Kanto TUK Key Specs
- 2-way Design
- 130-watt RMS( 260-watt Peak) Integrated Amplifier
- 1.0625 x 1.375" AMT Tweeter
- 5.25" Aluminum Woofer
- 50-20k Hz Frequency Response
- 24-bit Max Depth / 96 kHz Max Sample Rate
- Weight:4.50kg
- Dimensions (H x W x D): 277.8" x 7.06" x 10.9"( 277.8 x 179.4 x 276.2mm )
In the following sections, we will get into more detail in order to better understand how the Genelec G Three and Kanto TUK compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Genelec G Three and TUK are 2-way speakers.
| Driver |
Genelec G Three |
Kanto TUK |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
0.75-inch
|
1.0625 x 1.375-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.1-inch
|
1 x 5.25-inch
|
Genelec G Three features a 0.75" Dome Tweeter and 1 x 5.1" Cone Woofer with a Crossover frequency at 3000Hz. On the other hand, the TUK features a 1.0625 x 1.375" Folded ribbon AMT Tweeter and 1 x 5.25" Aluminum Woofer .
Frequency Response
Genelec G Three has a frequency range of 54-20k Hz whereas TUK has a frequency range of 50-20k Hz. With a minimum frequency of 50Hz, the TUK can go slightly deeper then the Genelec G Three's min frequency of 54Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Genelec G Three's and Kanto TUK's external dimensions. Genelec G Three has external dimensions of 299 x 189 x 178 mm ( 11.8 x 7.4 x 7) whereas Kanto TUK has external dimensions of 277.8 x 179.4 x 276.2mm ( 10.9 x 7.06 x 10.9inch) .
Kanto TUK is 9.6mm narrower and 21.2mm shorter than Genelec G Three but it is also 98.2mm deeper.
Below you can see the front view size comparison of Genelec G Three and Kanto TUK in scale.
Comparison image of Genelec G Three and Kanto TUK Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Genelec G Three is approximately 336.4cm2 / 52.1inch2 and base area of the Kanto TUK is approximately 495.5cm2 / 76.8inch2. The Genelec G Three requires 32% less surface area than the TUK which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Genelec G Three and Kanto TUK on a Media Console