In this review, we will be comparing Vestia No2 and 704 S3, two Passive Floor-standing speakers from Focal and Bowers Wilkins.
Let's have a brief look at the main features
of Focal Vestia No2 and B&W 704 S3 first before getting into our more
detailed comparison.
Focal Vestia No2 Key Specs
- 3-way Design
- 1" inverted dome Tweeter
- 6.5" Midrange
- 2 x 6.5" Slatefiber Woofer
- 47-30k Hz Frequency Response
- 91.5 dB Sensitivity
- Impedance: 8ohms
- Power Range:40-250watts
- Weight:22.00kg
- Dimensions (H x W x D): 1013.0" x 10-1/8" x 14-5/8"( 1013.0 x 258.0 x 372.0mm )
B&W 704 S3 Key Specs
- 3-way Design
- 1" Tweeter
- 5" Midrange
- 2 x 5" Aerofoil Woofer
- 5" Midrange
- 46-28k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 8ohms
- Power Range:30-150watts
- Weight:20.53kg
- Dimensions (H x W x D): 964.0" x 6.5" x 11.8"( 964.0 x 165.0 x 300.0mm )
What size room are the Focal Vestia No2 and B&W 704 S3 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Focal Vestia No2 |
B&W 704 S3 |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Good |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Focal Vestia No2 and B&W 704 S3 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Vestia No2 and 704 S3 are 3-way speakers.
| Driver |
Focal Vestia No2 |
B&W 704 S3 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 6.5-inch |
1 x 5-inch |
|
Woofer
|
2 x 6.5-inch
|
2 x 5-inch
|
Vestia No2 features a 1" Al/Mg inverted dome Tweeter , a 6.5" Midrange and 2 x 6.5" Slatefiber Woofer with a Crossover frequency at 280Hz and 2800Hz. On the other hand, the 704 S3 features a 1" Tweeter , a 5" Midrange and 2 x 5" Aerofoil Woofer .
Frequency Response
Vestia No2 has a frequency range of 47-30k Hz whereas 704 S3 has a frequency range of 46-28k Hz. With a minimum frequency of 46Hz, the 704 S3 can go slightly deeper then the Vestia No2's min frequency of 47Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Vestia No2 and 704 S3 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Vestia No2 sensitivity is rated at 91.5 dB and the 704 S3's is at 88 dB. This 4 dB difference makes the Focal Vestia No2 a more sensitive speaker compared to B&W 704 S3, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Vestia No2 can handle a max power of 250 watts RMS from the amp the whereas 704 S3 has a max power handling value of 150 watts RMS, 100 watts less than the Vestia No2.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Cabinet Type and Port Position
Vestia No2 has a front firing port whereas 704 S3 has a rear firing ports. Focal Vestia No2's front-firing port gives more flexibility in placement in regards to proximity to walls compared to B&W 704 S3 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Focal Vestia No2's and B&W 704 S3's external dimensions. Focal Vestia No2 has external dimensions of 1013.0 x 258.0 x 372.0mm ( 39-7/8-inch x 10-1/8-inch x 14-5/8-inch) whereas B&W 704 S3 has external dimensions of 964.0 x 165.0 x 300.0mm ( 38-inch x 6.5-inch x 11.8-inch) .
Focal Vestia No2 is clearly the larger of the two speakers. Its body is 93mm wider, 49mm taller and 72mm deeper than B&W 704 S3.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Focal Vestia No2 is approximately 959.8cm2 / 148.8inch2 and base area of the B&W 704 S3 is approximately 495.0cm2 / 76.7inch2. The Vestia No2 requires 94% more surface area than the 704 S3 which gives it a small disadvantage on placement in tight spaces.