In this review, we will be comparing Vestia No1 and Debut 2.0 B6.2, two Passive Bookshelf speakers from Focal and ELAC. Let's have a brief look at the main features
of Focal Vestia No1 and ELAC Debut 2.0 B6.2 first before getting into our more
detailed comparison.
What size room are the Focal Vestia No1 and ELAC Debut 2.0 B6.2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Focal Vestia No1 and ELAC Debut 2.0 B6.2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Vestia No1 and Debut 2.0 B6.2 are 2-way speakers.
Driver |
Focal Vestia No1 |
ELAC Debut 2.0 B6.2 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
Vestia No1 features a 1" Al/Mg inverted dome Tweeter and 1 x 6.5" Slatefiber Woofer with a Crossover frequency at 2800Hz. On the other hand, the Debut 2.0 B6.2 features a 1" Cloth Soft-Dome Tweeter and 1 x 6.5" Woven Aramid-Fiber Woofer with a Crossover frequency at 2200Hz.
Frequency Response
Vestia No1 has a frequency range of 56-30k Hz whereas Debut 2.0 B6.2 has a frequency range of 44-35k Hz. With a minimum frequency of 44Hz, the Debut 2.0 B6.2 can go significantly deeper on the low side and provide stronger bass compared to the Vestia No1's min frequency of 56Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Vestia No1 is a 8 ohms speaker compared to the Debut 2.0 B6.2 which has a nominal impedance of 6 ohms.
These two speakers also have different sensitivity levels. Vestia No1 sensitivity is rated at 89.5 dB and the Debut 2.0 B6.2's is rated at 87 dB. This 3 dB difference makes the Focal Vestia No1 a more sensitive speaker compared to ELAC Debut 2.0 B6.2, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Cabinet Type and Port Position
Both Vestia No1 and Debut 2.0 B6.2 have front firing ports. front ported speakers offers more flexibility in placement in regards to proximity to walls&surfaces compared to rear ported speakers.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Focal Vestia No1's and ELAC Debut 2.0 B6.2's external dimensions. Focal Vestia No1 has external dimensions of 388.0 x 220.0 x 261.0mm ( 15-1/4-inch x 8-5/8-inch x 10-1/4-inch) whereas ELAC Debut 2.0 B6.2 has external dimensions of 375.0 x 195.0 x 268.0mm ( 14.7 x 7.6 x 10.5inch) .
ELAC Debut 2.0 B6.2 is 25mm narrower and 13mm shorter than Focal Vestia No1 but it is also 7mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Focal Vestia No1 is approximately 574.2cm2 / 89.0inch2 and base area of the ELAC Debut 2.0 B6.2 is approximately 522.6cm2 / 81.0inch2. The Vestia No1 requires 10% more surface area than the Debut 2.0 B6.2 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Focal Vestia No1 weighs 7.00kg / 15.4lbs and the ELAC Debut 2.0 B6.2 weighs 7.40kg / 16.3lbs. This makes the Debut 2.0 B6.2 6% heavier than the Vestia No1.
Here is a comparison of how Vestia No1 and Debut 2.0 B6.2's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of ELAC Debut 2.0 B6.2?
Here are the items that come with the Debut 2.0 B6.2:
2 Bookshelf loudspeakers2 GrillesOperating Instructions
Sensitivity |
90 dB
vs
87 dB
|
Play louder with same amount of amplification power |
Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
Low Frequency Response |
44 Hz
vs
56 Hz
|
Generates deeper bass |
High Frequency Response |
35k Hz
vs
30k Hz
|
Generates higher frequency |
Height |
375mm
vs
388mm
|
Easier to fit in smaller spaces |
Base Surface Area |
522cm2 (195x268mm)
vs
574cm2 (220x261mm)
|
Takes less floor space |
Price per pair* |
400USD
vs
1198USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
Focal Vestia No1 |
ELAC Debut 2.0 B6.2 |
Brand |
Focal |
ELAC |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
25-120 watts |
up to 120 watts |
Sensitivity |
89.5 dB |
87 dB |
Impedance |
8 ohms |
6 ohms |
Impedance |
4.5 ohms |
n/a |
Frequency Response |
56-30k Hz |
44-35k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
6.5" |
6.5" |
Woofer Composition |
Slatefiber |
Woven Aramid-Fiber |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
inverted dome |
Soft-Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2800Hz |
2200Hz |
Firing Direction |
front |
front |
Physical Specs |
|
|
Height |
388.0mm (15.3") |
375.0mm (14.8") |
Width |
220.0mm (8.7") |
195.0mm (7.7") |
Depth |
261.0mm (10.3") |
268.0mm (10.6") |
Weight |
7.00kg (15.4lbs) |
7.40kg (16.3lbs) |
Enclosure |
Bass Reflex |
Ported |
Finish |
MDF |
MDF/Vinyl |
Available Colors |
Black High Gloss, Dark Wood, Light Wood |
Black |
Mounting Bracket |
|
No |
Recommended Stand Height |
n/a |
24-28" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
No |
Other |
|
|
Parts Warranty |
|
3 Years |
Labor Warranty |
|
3 Years |