In this review, we will be comparing Airmotiv T3+ and BP-9020, two Passive Floor-standing speakers from Emotiva and Definitive Technology. Let's have a brief look at the main features
of Emotiva Airmotiv T3+ and Definitive BP-9020 first before getting into our more
detailed comparison.
What size room are the Emotiva Airmotiv T3+ and Definitive BP-9020 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Emotiva Airmotiv T3+ and Definitive BP-9020 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Airmotiv T3+ and BP-9020 are 3-way speakers.
Driver |
Emotiva Airmotiv T3+ |
Definitive BP-9020 |
Driver Setup
|
3-way
|
3-way
|
Tweeter
|
25×32 mm-inch
|
1-inch
|
Midrange
|
2 x 5.25-inch |
3 x 3.5-inch |
Woofer
|
3 x 8-inch
|
1 x 8-inch
|
Airmotiv T3+ features a 25×32 mm" folded ribbon Tweeter , a 5.25" Midrange and 3 x 8" woven fiber cone Woofer with a Crossover frequency at 350 Hz and 2800Hz. On the other hand, the BP-9020 features a 1" annealed aluminum dome Tweeter , a 3.5" Midrange and 1 x 8" Polypropelene Woofer .
Frequency Response
Airmotiv T3+ has a frequency range of 29 Hz – 28 kHz whereas BP-9020 has a frequency range of 28-40k Hz. With a minimum frequency of 28Hz, the BP-9020 can go slightly deeper then the Airmotiv T3+'s min frequency of 29Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Airmotiv T3+ is a 4 ohms speaker compared to the BP-9020 which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Airmotiv T3+ can provide this impedance level.
These two speakers also have different sensitivity levels. Airmotiv T3+ sensitivity is rated at 91 dB and the BP-9020's is rated at 92 dB. This 1 dB difference makes the Definitive BP-9020 a more sensitive speaker compared to Emotiva Airmotiv T3+, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Airmotiv T3+ can handle a max power of 250 watts RMS from the amp the whereas BP-9020 has a max power handling value of 200 watts RMS, 50 watts less than the Airmotiv T3+.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Airmotiv T3+ features Binding post posts which make bi-amping or bi-wiring possible. BP-9020 has a 5-Way post, RCA which doesn't feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Emotiva Airmotiv T3+'s and Definitive BP-9020's external dimensions. Emotiva Airmotiv T3+ has external dimensions of 1258.0 x 318.0 x 432.0mm ( 49-1/2-inch x 12-1/2-inch x 17-inch) whereas Definitive BP-9020 has external dimensions of 904.0 x 281.0 x 351.0mm ( 35-9/16 x 11-1/16 x 13-13/16inch) .
Emotiva Airmotiv T3+ is clearly the larger of the two speakers. Its body is 37mm wider, 354mm taller and 81mm deeper than Definitive BP-9020.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Emotiva Airmotiv T3+ is approximately 1373.8cm2 / 212.9inch2 and base area of the Definitive BP-9020 is approximately 986.3cm2 / 152.9inch2. The Airmotiv T3+ requires 39% more surface area than the BP-9020 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Emotiva Airmotiv T3+ weighs 38.60kg / 84.9lbs and the Definitive BP-9020 weighs 13.64kg / 30lbs. This makes the Airmotiv T3+ 183% heavier than the BP-9020.
Here is a comparison of how Airmotiv T3+ and BP-9020's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Definitive BP-9020?
Here are the items that come with the BP-9020:
Tower loudspeaker6.5-feet AC power cordTop-plate (installed)Stabilizer base4 Floor guides4 Carpet spikes4 Screws4 NutsOwners ManualWhat Obsession Sounds Like card
Max Input Power |
250 watts
vs
200 watts
|
Handle more power from your amplifier |
Number of Woofers |
3
vs
1
|
More woofers |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Sensitivity |
92 dB
vs
91 dB
|
Play louder with same amount of amplification power |
Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
Low Frequency Response |
28 Hz
vs
29 Hz
|
Generates deeper bass |
High Frequency Response |
40k Hz
vs
28k Hz
|
Generates higher frequency |
Dolby Atmos Drivers |
Optional
vs
No
|
Dolby Atmos Compatibility |
Height |
904mm
vs
1258mm
|
Easier to fit in smaller spaces |
Base Surface Area |
986cm2 (281x351mm)
vs
1373cm2 (318x432mm)
|
Takes less floor space |
Price per pair* |
1498USD
vs
1899USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
Emotiva Airmotiv T3+ |
Definitive Technology BP-9020 |
Brand |
Emotiva |
Definitive Technology |
Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
Power Range |
Up to 250 watts |
50-200 watts |
Sensitivity |
91 dB |
92 dB |
Impedance |
4 ohms |
8 ohms |
Frequency Response |
29 Hz – 28 kHz |
28-40k Hz |
Drivers |
|
|
Woofer Quantity |
3 |
1 |
Woofer Size |
8" |
8" |
Woofer Composition |
woven fiber cone |
Polypropelene |
Woofer Surround Material |
n/a |
Rubber |
Tweeter Size |
25×32 mm" |
1" |
Tweeter Type |
folded ribbon |
dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
5.25" |
3.5" |
Crossover Frequency |
350 Hz and 2800Hz |
n/a |
Firing Direction |
rear |
n/a |
Physical Specs |
|
|
Height |
1258.0mm (49.5") |
904.0mm (35.6") |
Width |
318.0mm (12.5") |
281.0mm (11.1") |
Depth |
432.0mm (17") |
351.0mm (13.8") |
Weight |
38.60kg (84.9lbs) |
13.64kg (30lbs) |
Enclosure |
Bass reflex |
Bass Reflex |
Finish |
HDF |
MDF/Aluminum/Cloth |
Available Colors |
Black |
Black |
Grille |
Yes |
n/a |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
No |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |