In this review, we will be comparing Airmotiv T-Zero+ and R-820F, two Passive Floor-standing speakers from Emotiva and Klipsch. Let's have a brief look at the main features
of Emotiva Airmotiv T-Zero+ and Klipsch R-820F first before getting into our more
detailed comparison.
What size room are the Emotiva Airmotiv T-Zero+ and Klipsch R-820F speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Emotiva Airmotiv T-Zero+ and Klipsch R-820F compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Airmotiv T-Zero+ and R-820F are 2-way speakers.
Driver |
Emotiva Airmotiv T-Zero+ |
Klipsch R-820F |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
25×32 mm-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
2 x 5.25-inch
|
2 x 8-inch
|
Airmotiv T-Zero+ features a 25×32 mm" folded ribbon Tweeter and 2 x 5.25" woven fiber cone Woofer with a Crossover frequency at 2500Hz. On the other hand, the R-820F features a 1" Tweeter and 2 x 8" Copper-spun IMG Woofer .
Frequency Response
Airmotiv T-Zero+ has a frequency range of 48-28 kHz whereas R-820F has a frequency range of 35-21k Hz. With a minimum frequency of 35Hz, the R-820F can go significantly deeper on the low side and provide stronger bass compared to the Airmotiv T-Zero+'s min frequency of 48Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Airmotiv T-Zero+ is a 4 ohms speaker compared to the R-820F which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Airmotiv T-Zero+ can provide this impedance level.
These two speakers also have different sensitivity levels. Airmotiv T-Zero+ sensitivity is rated at 87 dB and the R-820F's is rated at 97 dB. This 10 dB difference makes the Klipsch R-820F a more sensitive speaker compared to Emotiva Airmotiv T-Zero+, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Airmotiv T-Zero+ can handle a max power of 150 watts RMS from the amp the whereas Airmotiv T-Zero+ has a max power handling value of 100 watts RMS , 50 watts less than the R-820F.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Emotiva Airmotiv T-Zero+'s and Klipsch R-820F's external dimensions. Emotiva Airmotiv T-Zero+ has external dimensions of 969.0 x 969.0 x 267.0mm ( 38-1/8 x 38-1/8 x 10-1/2inch) whereas Klipsch R-820F has external dimensions of 1096.0 x 277.0 x 426.0mm ( 43-1/8 x 10-7/8 x 16-3/4inch) .
Emotiva Airmotiv T-Zero+ is 127mm shorter and 159mm less deeper than Klipsch R-820F but it is also 692mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Emotiva Airmotiv T-Zero+ is approximately 2587.2cm2 / 401.0inch2 and base area of the Klipsch R-820F is approximately 1180.0cm2 / 182.9inch2. The Airmotiv T-Zero+ requires 119% more surface area than the R-820F which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Emotiva Airmotiv T-Zero+ weighs 13.20kg / 29lbs and the Klipsch R-820F weighs 24.55kg / 54lbs. This makes the R-820F 86% heavier than the Airmotiv T-Zero+.
Here is a comparison of how Airmotiv T-Zero+ and R-820F's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Klipsch R-820F?
Here are the items that come with the R-820F:
Floorstanding loudspeakerGrille (installed)2 Feet4 ScrewsQuick Setup GuideImportant Safety InstructionsWarranty InformationLoudspeaker Feet note
High Frequency Response |
28k Hz
vs
21k Hz
|
Generates higher frequency |
Height |
969mm
vs
1096mm
|
Easier to fit in smaller spaces |
Price per pair* |
499USD
vs
1198USD
|
costs less (*prices may change depending on the seller, location and time) |
Max Input Power |
150 watts
vs
100 watts
|
Handle more power from your amplifier |
Sensitivity |
97 dB
vs
87 dB
|
Play louder with same amount of amplification power |
Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
Woofer Size |
8 inches
vs
5.25 inches
|
Larger woofer |
Low Frequency Response |
35 Hz
vs
48 Hz
|
Generates deeper bass |
Base Surface Area |
1180cm2 (277x426mm)
vs
2587cm2 (969x267mm)
|
Takes less floor space |
General |
Emotiva Airmotiv T-Zero+ |
Klipsch Reference R-820F |
Brand |
Emotiva |
Klipsch |
Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
Power Range |
Up to 100 watts |
up to 150 watts |
Sensitivity |
87 dB |
97 dB |
Impedance |
4 ohms |
8 ohms |
Frequency Response |
48-28 kHz |
35-21k Hz |
Drivers |
|
|
Woofer Quantity |
2 |
2 |
Woofer Size |
5.25" |
8" |
Woofer Composition |
woven fiber cone |
Copper-spun IMG |
Woofer Surround Material |
n/a |
Rubber |
Tweeter Size |
25×32 mm" |
1" |
Tweeter Type |
folded ribbon |
n/a |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2500Hz |
n/a |
Firing Direction |
rear |
n/a |
Physical Specs |
|
|
Height |
969.0mm (38.1") |
1096.0mm (43.1") |
Width |
969.0mm (38.1") |
277.0mm (10.9") |
Depth |
267.0mm (10.5") |
426.0mm (16.8") |
Weight |
13.20kg (29lbs) |
24.55kg (54lbs) |
Enclosure |
Bass reflex |
Bass Reflex |
Finish |
HDF |
MDF/Wood-grain vinyl |
Available Colors |
Black |
Black |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
n/a |
No |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |