In this review, we will be comparing Airmotiv C3+ and R400, two Passive Center Channel speakers from Emotiva and Polk Audio. Let's have a brief look at the main features
of Emotiva Airmotiv C3+ and Polk R400 first before getting into our more
detailed comparison.
What size room are the Emotiva Airmotiv C3+ and Polk R400 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Emotiva Airmotiv C3+ and Polk R400 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Airmotiv C3+ is a 3-way design whereas the R400 is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Driver |
Emotiva Airmotiv C3+ |
Polk R400 |
Driver Setup
|
3-way
|
2-way
|
Tweeter
|
25×32 mm-inch
|
1-inch
|
Midrange
|
2 x 5.25-inch |
- |
Woofer
|
4 x 6.5-inch
|
2 x 6.5-inch
|
Airmotiv C3+ features a 25×32 mm" folded ribbon Tweeter , a 5.25" Midrange and 4 x 6.5" woven fiber cone Woofer with a Crossover frequency at 350 Hz and 2800Hz. On the other hand, the R400 features a 1" Pinnacle Ring Radiator Tweeter and 2 x 6.5" Polypropylene Turbine Cone Woofer with a Crossover frequency at 2500Hz.
Frequency Response
Airmotiv C3+ has a frequency range of 40 Hz – 28 kHz whereas R400 has a frequency range of 48-39K Hz. With a minimum frequency of 40Hz, the Airmotiv C3+ can go significantly deeper on the low side and provide stronger bass compared to the R400's min frequency of 48Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Airmotiv C3+ is a 4 ohms speaker compared to the R400 which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Airmotiv C3+ can provide this impedance level.
These two speakers also have different sensitivity levels. Airmotiv C3+ sensitivity is rated at 92 dB and the R400's is rated at 89 dB. This 3 dB difference makes the Emotiva Airmotiv C3+ a more sensitive speaker compared to Polk R400, hence will play louder with the same amount of watts.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Airmotiv C3+ features Binding post posts which make bi-amping or bi-wiring possible. R400 has a Binding post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both Airmotiv C3+ and R400 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Emotiva Airmotiv C3+'s and Polk R400's external dimensions. Emotiva Airmotiv C3+ has external dimensions of 220.0 x 1391.0 x 312.0mm ( 8-5/8-inch x 54-3/4-inch x 12-1/4-inch) whereas Polk R400 has external dimensions of 199.0 x 618.0 x 372.0mm ( 7-13/16 x 24-5/16 x 14-5/8inch) .
Polk R400 is 773mm narrower and 21mm shorter than Emotiva Airmotiv C3+ but it is also 60mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Emotiva Airmotiv C3+ is approximately 4339.9cm2 / 672.7inch2 and base area of the Polk R400 is approximately 2299.0cm2 / 356.3inch2. The Airmotiv C3+ requires 89% more surface area than the R400 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Emotiva Airmotiv C3+ weighs 26.80kg / 59lbs and the Polk R400 weighs 14.91kg / 32.8lbs. This makes the Airmotiv C3+ 80% heavier than the R400.
Here is a comparison of how Airmotiv C3+ and R400's weights compare with the average, max and min weights in Passive Center Channel class.
Weight
All Center Channel Speakers
What's in the Box of Polk R400?
Here are the items that come with the R400:
Center-channel loudspeakerGrilleOwners ManualOnline Registration
Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
Sensitivity |
92 dB
vs
89 dB
|
Play louder with same amount of amplification power |
Number of Woofers |
4
vs
2
|
More woofers |
Low Frequency Response |
40 Hz
vs
48 Hz
|
Generates deeper bass |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
High Frequency Response |
39k Hz
vs
28k Hz
|
Generates higher frequency |
Height |
199mm
vs
220mm
|
Easier to fit in smaller spaces |
Base Surface Area |
2299cm2 (618x372mm)
vs
4339cm2 (1391x312mm)
|
Takes less floor space |
Price per pair* |
649USD
vs
899USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
Emotiva Airmotiv C3+ |
Polk Audio Reserve R400 |
Brand |
Emotiva |
Polk Audio |
Speaker Type |
Center channel speaker |
Center channel speaker |
Power Range |
Up to 200 watts |
20-200 watts |
Sensitivity |
92 dB |
89 dB |
Impedance |
4 ohms |
8 ohms |
Impedance |
n/a |
4.1 ohms |
Frequency Response |
40 Hz – 28 kHz |
48-39K Hz |
Drivers |
|
|
Woofer Quantity |
4 |
2 |
Woofer Size |
6.5" |
6.5" |
Woofer Composition |
woven fiber cone |
Polypropylene Turbine Cone |
Woofer Surround Material |
n/a |
Rubber |
Tweeter Size |
25×32 mm" |
1" |
Tweeter Type |
folded ribbon |
Pinnacle Ring Radiator |
Aimable Tweeter |
No |
No |
Midrange Driver |
5.25" |
N/A" |
Crossover Frequency |
350 Hz and 2800Hz |
2500Hz |
Firing Direction |
rear |
rear |
Physical Specs |
|
|
Height |
220.0mm (8.7") |
199.0mm (7.8") |
Width |
1391.0mm (54.8") |
618.0mm (24.3") |
Depth |
312.0mm (12.3") |
372.0mm (14.6") |
Weight |
26.80kg (59lbs) |
14.91kg (32.8lbs) |
Enclosure |
Bass reflex |
Bass Reflex |
Finish |
HDF |
n/a |
Available Colors |
Black |
Black, Walnut |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
No |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |