In this review, we will be comparing Airmotiv B2+ and ES20, two Passive Bookshelf speakers from Emotiva and Polk Audio. Let's have a brief look at the main features
of Emotiva Airmotiv B2+ and Polk ES20 first before getting into our more
detailed comparison.
What size room are the Emotiva Airmotiv B2+ and Polk ES20 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Emotiva Airmotiv B2+ and Polk ES20 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Airmotiv B2+ and ES20 are 2-way speakers.
Driver |
Emotiva Airmotiv B2+ |
Polk ES20 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
25×32 mm-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 6.25-inch
|
1 x 6.5-inch
|
Airmotiv B2+ features a 25×32 mm" folded ribbon Tweeter and 1 x 6.25" woven fiber cone Woofer with a Crossover frequency at 2000Hz. On the other hand, the ES20 features a 1" Terylene Soft-Dome Tweeter and 1 x 6.5" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz.
Frequency Response
Airmotiv B2+ has a frequency range of 40-28k Hz whereas ES20 has a frequency range of 41-40k Hz. With a minimum frequency of 40Hz, the Airmotiv B2+ can go slightly deeper then the ES20's min frequency of 41Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Airmotiv B2+ is a 4 ohms speaker compared to the ES20 which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Airmotiv B2+ can provide this impedance level.
On the other hand, they have the same sensitivity of 86 dBdB.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Airmotiv B2+ features Binding post posts which make bi-amping or bi-wiring possible. ES20 has a 5-Way post which doesn't feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both Airmotiv B2+ and ES20 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Emotiva Airmotiv B2+'s and Polk ES20's external dimensions. Emotiva Airmotiv B2+ has external dimensions of 324.0 x 216.0 x 293.0mm ( 12-3/4-inch x 8-1/2-inch x 11-1/2-inch) whereas Polk ES20 has external dimensions of 375.0 x 218.0 x 351.0mm ( 14-3/4 x 8-9/16 x 13-13/16inch) .
Polk ES20 is clearly the larger of the two speakers. Its body is 2mm wider, 51mm taller and 58mm deeper than Emotiva Airmotiv B2+.
Below you can see the front view size comparison of Emotiva Airmotiv B2+ and Polk ES20 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Emotiva Airmotiv B2+ is approximately 632.9cm2 / 98.1inch2 and base area of the Polk ES20 is approximately 765.2cm2 / 118.6inch2. The Airmotiv B2+ requires 17% less surface area than the ES20 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Emotiva Airmotiv B2+ weighs 7.10kg / 15.6lbs and the Polk ES20 weighs 7.73kg / 17lbs. This makes the ES20 9% heavier than the Airmotiv B2+.
Here is a comparison of how Airmotiv B2+ and ES20's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Polk ES20?
Here are the items that come with the ES20:
2 Bookshelf loudspeakers2 Grille (attached)8 Self-adhesive rubber feetOwners ManualOnline Product Registration
Low Frequency Response |
40 Hz
vs
41 Hz
|
Generates deeper bass |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Height |
324mm
vs
375mm
|
Easier to fit in smaller spaces |
Base Surface Area |
632cm2 (216x293mm)
vs
765cm2 (218x351mm)
|
Takes less floor space |
Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
Woofer Size |
6.5 inches
vs
6.25 inches
|
Larger woofer |
High Frequency Response |
40k Hz
vs
28k Hz
|
Generates higher frequency |
Price per pair* |
399USD
vs
499USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
Emotiva Airmotiv B2+ |
Polk Audio Signature Elite ES20 |
Brand |
Emotiva |
Polk Audio |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
Up to 125 watts |
20-125 watts |
Sensitivity |
86 dB |
86 dB |
Impedance |
4 ohms |
8 ohms |
Frequency Response |
40-28k Hz |
41-40k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
6.25" |
6.5" |
Woofer Composition |
woven fiber cone |
Mica-reinforced polypropylene |
Woofer Surround Material |
SBR |
Butyl rubber |
Tweeter Size |
25×32 mm" |
1" |
Tweeter Type |
folded ribbon |
Soft-Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2000Hz |
2500Hz |
Firing Direction |
rear |
rear |
Physical Specs |
|
|
Height |
324.0mm (12.8") |
375.0mm (14.8") |
Width |
216.0mm (8.5") |
218.0mm (8.6") |
Depth |
293.0mm (11.5") |
351.0mm (13.8") |
Weight |
7.10kg (15.6lbs) |
7.73kg (17lbs) |
Enclosure |
Bass reflex |
Bass Reflex |
Finish |
HDF |
MDF, Wood-grain vinyl |
Available Colors |
Black |
Black,White,Walnut |
Mounting Bracket |
No |
No |
Recommended Stand Height |
n/a |
22-26" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
No |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |