In this review, we will be comparing Airmotiv B1+ and Bronze 1, two Passive Bookshelf speakers from Emotiva and Monitor Audio.
Let's have a brief look at the main features
of Emotiva Airmotiv B1+ and Monitor Audio Bronze 1 first before getting into our more
detailed comparison.
Emotiva Airmotiv B1+ Key Specs
- 2-way Design
- 25×32 mm" folded ribbon Tweeter
- 5.25" woven fiber cone Woofer
- 48 Hz – 28 kHz Frequency Response
- 86 dB Sensitivity
- Impedance: 8ohms
- Power Range:Up to 70watts
- Weight:4.00kg
- Dimensions (H x W x D): 274.0" x 7-1/8" x 8-1/4"( 274.0 x 181.0 x 210.0mm )
Monitor Audio Bronze 1 Key Specs
- 2-way Design
- 1" Dome Tweeter
- 5.5" C-CAM Woofer
- 55-30k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 8ohms
- Power Range:20-70watts
- Weight:3.50kg
- Dimensions (H x W x D): 260.0" x 6.4" x 8.0"( 260.0 x 165.0 x 205.0mm )
What size room are the Emotiva Airmotiv B1+ and Monitor Audio Bronze 1 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Emotiva Airmotiv B1+ |
Monitor Audio Bronze 1 |
| Near-field |
Good |
Good |
| Small Room |
Good |
Good |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Poor |
| Very Large Room |
No way |
No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Emotiva Airmotiv B1+ and Monitor Audio Bronze 1 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Airmotiv B1+ and Bronze 1 are 2-way speakers.
| Driver |
Emotiva Airmotiv B1+ |
Monitor Audio Bronze 1 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
25×32 mm-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.25-inch
|
1 x 5.5-inch
|
Airmotiv B1+ features a 25×32 mm" folded ribbon Tweeter and 1 x 5.25" woven fiber cone Woofer with a Crossover frequency at 2000Hz. On the other hand, the Bronze 1 features a 1" Dome Tweeter and 1 x 5.5" C-CAM Woofer with a Crossover frequency at 2700Hz.
Frequency Response
Airmotiv B1+ has a frequency range of 48 Hz – 28 kHz whereas Bronze 1 has a frequency range of 55-30k Hz. With a minimum frequency of 48Hz, the Airmotiv B1+ can go significantly deeper on the low side and provide stronger bass compared to the Bronze 1's min frequency of 55Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Airmotiv B1+ and Bronze 1 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Airmotiv B1+ sensitivity is rated at 86 dB and the Bronze 1's is at 88 dB. This 2 dB difference makes the Monitor Audio Bronze 1 a more sensitive speaker compared to Emotiva Airmotiv B1+, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Cabinet Type and Port Position
Both Airmotiv B1+ and Bronze 1 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Emotiva Airmotiv B1+ Port
Monitor Audio Bronze 1 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Emotiva Airmotiv B1+'s and Monitor Audio Bronze 1's external dimensions. Emotiva Airmotiv B1+ has external dimensions of 274.0 x 181.0 x 210.0mm ( 10-3/4 x 7-1/8 x 8-1/4inch) whereas Monitor Audio Bronze 1 has external dimensions of 260.0 x 165.0 x 205.0mm ( 10.2 x 6.4 x 8.0inch) .
Emotiva Airmotiv B1+ is clearly the larger of the two speakers. Its body is 16mm wider, 14mm taller and 5mm deeper than Monitor Audio Bronze 1.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Emotiva Airmotiv B1+ is approximately 380.1cm2 / 58.9inch2 and base area of the Monitor Audio Bronze 1 is approximately 338.3cm2 / 52.4inch2. The Airmotiv B1+ requires 12% more surface area than the Bronze 1 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Emotiva Airmotiv B1+ weighs 4.00kg / 8.8lbs and the Monitor Audio Bronze 1 weighs 3.50kg / 7.7lbs. This makes the Airmotiv B1+ 14% heavier than the Bronze 1.
Here is a comparison of how Airmotiv B1+ and Bronze 1's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Monitor Audio Bronze 1?
Here are the items that come with the Bronze 1:
2 Bookshelf loudspeakers 2 Grilles 2 Foam port plugs Hex-key Owner's Manual Important Safety Instructions
 Low Frequency Response |
48 Hz
vs
55 Hz
|
Generates deeper bass |
 Sensitivity |
88 dB
vs
86 dB
|
Play louder with same amount of amplification power |
|
Woofer Size |
5.5 inches
vs
5.25 inches
|
Larger woofer |
 High Frequency Response |
30k Hz
vs
28k Hz
|
Generates higher frequency |
 Height |
260mm
vs
274mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
338cm2
vs
380cm2
|
Takes less floor space |
| General |
Emotiva Airmotiv B1+ |
Monitor Audio Bronze 1 |
| Brand |
Emotiva |
Monitor Audio |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
Up to 70 watts |
20-70 watts |
| Sensitivity |
86 dB |
88 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
48 Hz – 28 kHz |
55-30k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5.25" |
5.5" |
| Woofer Composition |
woven fiber cone |
C-CAM |
| Woofer Surround Material |
SBR |
Rubber |
| Tweeter Size |
25×32 mm" |
1" |
| Tweeter Type |
folded ribbon |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2000Hz |
2700Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
274.0mm (10.8") |
260.0mm (10.2") |
| Width |
181.0mm (7.1") |
165.0mm (6.5") |
| Depth |
210.0mm (8.3") |
205.0mm (8.1") |
| Weight |
4.00kg (8.8lbs) |
3.50kg (7.7lbs) |
| Enclosure |
Bass reflex |
Bass Reflex |
| Finish |
HDF |
MDF/Wood-grain vinyl |
| Available Colors |
Black |
Walnut, White, Rosemah, Black |
| Mounting Bracket |
|
No |
| Recommended Stand Height |
n/a |
30-31" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
n/a |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |