In this review, we will be comparing DFR52 and Debut 2.0 F6.2, two Passive Floor-standing speakers by ELAC Let's have a brief look at the main features
of ELAC Debut Ref DFR52 and ELAC Debut 2.0 F6.2 first before getting into our more
detailed comparison.
What size room are the ELAC Debut Ref DFR52 and ELAC Debut 2.0 F6.2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the ELAC Debut Ref DFR52 and ELAC Debut 2.0 F6.2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both DFR52 and Debut 2.0 F6.2 are 3-way speakers.
Driver |
ELAC Debut Ref DFR52 |
ELAC Debut 2.0 F6.2 |
Driver Setup
|
3-way
|
3-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
1 x 5.25-inch |
1 x 6.5-inch |
Woofer
|
2 x 5.25-inch
|
2 x 6.5-inch
|
DFR52 features a 1" cloth dome Tweeter , a 5.25" Midrange and 2 x 5.25" Aramid fiber Woofer . On the other hand, the Debut 2.0 F6.2 features a 1" silk dome with wide-dispersion waveguide Tweeter , a 6.5" Midrange and 2 x 6.5" Woven Aramid-Fiber Woofer with a Crossover frequency at 90Hz and 2200Hz.
Frequency Response
DFR52 has a frequency range of 42-35k Hz whereas Debut 2.0 F6.2 has a frequency range of 39-35k Hz. With a minimum frequency of 39Hz, the Debut 2.0 F6.2 can go slightly deeper then the DFR52's min frequency of 42Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
DFR52 and Debut 2.0 F6.2 have the same Impedance of 6 ohms and their sensitivity is also same at 87 dB.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
DFR52 and Debut 2.0 F6.2 has the same power range of up to 140 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
DFR52 features 5-Way post type posts and Debut 2.0 F6.2 has a 5-Way post type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both DFR52 and Debut 2.0 F6.2 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Debut Ref DFR52's and ELAC Debut 2.0 F6.2's external dimensions. ELAC Debut Ref DFR52 has external dimensions of 1031.0 x 232.0 x 283.0mm ( 40-9/16 x 9-1/8 x 11-1/8inch) whereas ELAC Debut 2.0 F6.2 has external dimensions of 1126.0 x 207.0 x 296.0mm ( 44-5/16 x 8-1/8 x 11-5/8inch) .
ELAC Debut Ref DFR52 is 95mm shorter and 13mm less deeper than ELAC Debut 2.0 F6.2 but it is also 25mm wider.
Below you can see the front view size comparison of ELAC Debut Ref DFR52 and ELAC Debut 2.0 F6.2 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Debut Ref DFR52 is approximately 656.6cm2 / 101.8inch2 and base area of the ELAC Debut 2.0 F6.2 is approximately 612.7cm2 / 95.0inch2. The DFR52 requires 7% more surface area than the Debut 2.0 F6.2 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The ELAC Debut Ref DFR52 weighs 16.77kg / 36.9lbs and the ELAC Debut 2.0 F6.2 weighs 19.95kg / 43.9lbs. This makes the Debut 2.0 F6.2 19% heavier than the DFR52.
Here is a comparison of how DFR52 and Debut 2.0 F6.2's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of ELAC Debut Ref DFR52?
Here are the items that are included inside the box of DFR52:
Floorstanding loudspeakerGrille4 Outrigger feet (spikes installed)4 Rubber feet4 Dials8 ScrewsHex-key
What's in the Box of ELAC Debut 2.0 F6.2?
Here are the items that come with the Debut 2.0 F6.2:
Floorstanding loudspeakerGrille4 Spikes (hex-nuts attached)Operating Instructions
Height |
1031mm
vs
1126mm
|
Easier to fit in smaller spaces |
Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
Low Frequency Response |
39 Hz
vs
42 Hz
|
Generates deeper bass |
Dolby Atmos Drivers |
Optional
vs
No
|
Dolby Atmos Compatibility |
Base Surface Area |
612cm2 (207x296mm)
vs
656cm2 (232x283mm)
|
Takes less floor space |
Price per pair* |
1060USD
vs
1400USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
ELAC Debut Reference DFR52 |
ELAC Debut 2.0 F6.2 |
Brand |
ELAC |
ELAC |
Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
Power Range |
up to 140 watts |
up to 140 watts |
Sensitivity |
87 dB |
87 dB |
Impedance |
6 ohms |
6 ohms |
Frequency Response |
42-35k Hz |
39-35k Hz |
Drivers |
|
|
Woofer Quantity |
2 |
2 |
Woofer Size |
5.25" |
6.5" |
Woofer Composition |
Aramid fiber |
Woven Aramid-Fiber |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
dome |
dome with wide-dispersion waveguide |
Aimable Tweeter |
No |
No |
Midrange Driver |
5.25" |
6.5" |
Crossover Frequency |
n/a |
90Hz and 2200Hz |
Firing Direction |
rear |
rear |
Physical Specs |
|
|
Height |
1031.0mm (40.6") |
1126.0mm (44.3") |
Width |
232.0mm (9.1") |
207.0mm (8.1") |
Depth |
283.0mm (11.1") |
296.0mm (11.7") |
Weight |
16.77kg (36.9lbs) |
19.95kg (43.9lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Wood-grain vinyl |
MDF/Vinyl |
Available Colors |
White Baffle / Oak Cabinet or Black Baffle / Walnut Cabinet |
Black |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
No |
Other |
|
|
Parts Warranty |
3 Years |
3 Years |
Labor Warranty |
3 Years |
3 Years |