SpeakerDecision
  • SPEAKERS by TYPE
    • Passive Bookshelf Speakers
    • Passive Floor-standing Speakers
    • Passive Center Channel Speakers
    • Passive In-wall Speakers
    • All Passive Speakers
    • Powered Subwoofers
    • Powered Stereo Speakers
  • AMPLIFIERS
  • SMART FIND

ELAC Debut 2.0 B6.2 vs Klipsch RP-500M Comparison

x
Speaker to replace
Change

ELAC Debut 2.0 B6.2

Passive Bookshelf | 44-35k Hz

ELAC Debut 2.0 B6.2
CHECK PRICE
Change
    
Klipsch RP-500M

Passive Bookshelf | 48-25k Hz

Klipsch Reference Premiere RP-500M
CHECK PRICE
ELAC Debut 2.0 B6.2 ELAC Debut 2.0 B6.2
See at AMAZON
Klipsch RP-500M Klipsch RP-500M
See at AMAZON
ELAC Debut 2.0 B6.2
See at AMAZON
Klipsch RP-500M
See at AMAZON
ELAC Debut 2.0 B6.2 vs Klipsch RP-500M Speaker Comparison

In this review, we will be comparing Debut 2.0 B6.2 and RP-500M, two Passive Bookshelf speakers from ELAC and Klipsch.

Let's have a brief look at the main features of ELAC Debut 2.0 B6.2 and Klipsch RP-500M first before getting into our more detailed comparison.

ELAC Debut 2.0 B6.2 Key Specs

  • 2-way Design
  • 1" Soft-Dome Tweeter
  • 6.5" Woven Aramid-Fiber Woofer
  • 44-35k Hz Frequency Response
  • 87 dB Sensitivity
  • Impedance: 6ohms
  • Power Range:up to 120watts
  • Weight:7.40kg
  • Dimensions (H x W x D): 375.0" x 7-3/4" x 11-5/16"( 375.0 x 195.0 x 268.0mm )

Klipsch RP-500M Key Specs

  • 2-way Design
  • 1" Tractrix Horn Tweeter
  • 5.25" Cerametallic Woofer
  • 48-25k Hz Frequency Response
  • 93 dB Sensitivity
  • Impedance: 8ohms
  • Power Range:up to 75watts
  • Weight:5.40kg
  • Dimensions (H x W x D): 343.0" x 6.8" x 9.4"( 343.0 x 173.0 x 241.0mm )

What size room are the ELAC Debut 2.0 B6.2 and Klipsch RP-500M speakers good for?

The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:

Listening Environment* ELAC Debut 2.0 B6.2 Klipsch RP-500M
Near-field Poor Good
Small Room Average Good
Mid-size Room Good Average
Large Room Average Poor
Very Large Room Poor No way

(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2. Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)

In the following sections, we will get into more detail in order to better understand how the ELAC Debut 2.0 B6.2 and Klipsch RP-500M compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.


**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.


Drivers

Both Debut 2.0 B6.2 and RP-500M are 2-way speakers.

Driver ELAC Debut 2.0 B6.2 Klipsch RP-500M
Driver Setup 2-way 2-way
Tweeter 1-inch 1-inch
Midrange - -
Woofer 1 x 6.5-inch 1 x 5.25-inch

Debut 2.0 B6.2 features a 1" Cloth Soft-Dome Tweeter and 1 x 6.5" Woven Aramid-Fiber Woofer with a Crossover frequency at 2200Hz. On the other hand, the RP-500M features a 1" Tractrix Horn Tweeter and 1 x 5.25" Cerametallic Woofer with a Crossover frequency at 1500Hz.

Frequency Response

Debut 2.0 B6.2 has a frequency range of 44-35k Hz whereas RP-500M has a frequency range of 48-25k Hz. With a minimum frequency of 44Hz, the Debut 2.0 B6.2 can go slightly deeper then the RP-500M's min frequency of 48Hz.

Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.

Low Frequency

Bookshelf Speakers

Debut 2.0 B6.2
RP-500M
Min
Average
Max
High Frequency

Bookshelf Speakers

ELAC Debut 2.0 B6.2
Klipsch RP-500M
Min
Average
Max

None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.

Impedance and Sensitivity

Debut 2.0 B6.2 is a 6 ohms speaker compared to the RP-500M which has a nominal impedance of 8 ohms.

These two speakers also have different sensitivity levels. Debut 2.0 B6.2 sensitivity is rated at 87 dB and the RP-500M's is rated at 93 dB. This 6 dB difference makes the Klipsch RP-500M a more sensitive speaker compared to ELAC Debut 2.0 B6.2, hence will play louder with the same amount of watts.

Sensitivity

Bookshelf Speakers

Debut 2.0 B6.2
RP-500M
Min
Average
Max

Power Range

Power range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.

Debut 2.0 B6.2 can handle a max power of 120 watts RMS from the amp the whereas RP-500M has a max power handling value of 75 watts RMS, 45 watts less than the Debut 2.0 B6.2.

Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters such as Impedance, sensitivity and system efficiencies.

Input Type and Bi-Amping / Bi-Wiring

Debut 2.0 B6.2 features Single binding posts type posts and RP-500M has a Single binding posts type posts. None of these speakers feature bi-amping/bi-wiring.

ELAC Debut 2.0 B6.2 Terminals
ELAC Debut 2.0 B6.2's 5-Way post terminals

Klipsch RP-500MSingle binding posts Terminals
Klipsch RP-500M's Single binding posts terminals

Cabinet Type and Port Position

Debut 2.0 B6.2 has a front firing port whereas RP-500M has a rear firing ports. ELAC Debut 2.0 B6.2's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Klipsch RP-500M with its rear-firing port.

Physical Specs

Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Debut 2.0 B6.2's and Klipsch RP-500M's external dimensions. ELAC Debut 2.0 B6.2 has external dimensions of 375.0 x 195.0 x 268.0mm ( 14.7 x 7.6 x 10.5inch) whereas Klipsch RP-500M has external dimensions of 343.0 x 173.0 x 241.0mm ( 13.5 x 6.8 x 9.4inch) .

ELAC Debut 2.0 B6.2 is clearly the larger of the two speakers. Its body is 22mm wider, 32mm taller and 27mm deeper than Klipsch RP-500M.

Below you can see the front view size comparison of ELAC Debut 2.0 B6.2 and Klipsch RP-500M in scale.

ELAC Debut 2.0 B6.2 vs Klipsch RP-500M Size Comparison - Front View
Comparison image of ELAC Debut 2.0 B6.2 and Klipsch RP-500M Size and External Dimensions

Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited. The base surface area of the ELAC Debut 2.0 B6.2 is approximately 522.6cm2 / 81.0inch2 and base area of the Klipsch RP-500M is approximately 416.9cm2 / 64.6inch2. The Debut 2.0 B6.2 requires 25% more surface area than the RP-500M which gives it a small disadvantage on placement in tight spaces.

Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:

ELAC Debut 2.0 B6.2 vs Klipsch RP-500M Size Comparison on a Media Console
Size Comparison image of ELAC Debut 2.0 B6.2 and Klipsch RP-500M on a Media Console
Weight Comparison

The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The ELAC Debut 2.0 B6.2 weighs 7.40kg / 16.3lbs and the Klipsch RP-500M weighs 5.40kg / 11.9lbs. This makes the Debut 2.0 B6.2 37% heavier than the RP-500M.

Here is a comparison of how Debut 2.0 B6.2 and RP-500M's weights compare with the average, max and min weights in Passive Bookshelf class.

Weight
All Bookshelf Speakers
ELAC Debut 2.0 B6.2
Klipsch RP-500M
Min
Average
Max

What's in the Box of ELAC Debut 2.0 B6.2?

Here are the items that are included inside the box of Debut 2.0 B6.2:
  • 2 Bookshelf loudspeakers
  • 2 Grilles
  • Operating Instructions
  • What's in the Box of Klipsch RP-500M?

    Here are the items that come with the RP-500M:
  • 2 Bookshelf loudspeakers
  • 2 Grilles (installed)
  • 8 Self-adhesive rubber feet
  • User Manual
  • Important Safety Instructions
  • Warranty Information

  • Reasons to choose ELAC Debut 2.0 B6.2 over Klipsch Reference Premiere RP-500M
    Max Input Power 120 watts vs 75 watts Handle more power from your amplifier
    Woofer Size 6.5 inches vs 5.25 inches Larger woofer
    Low Frequency Response 44 Hz vs 48 Hz Generates deeper bass
    High Frequency Response 35k Hz vs 25k Hz Generates higher frequency
    Port Position Front vs Rear Gives more flexibility placing close to walls
    Price per pair* 400USD vs 579USD costs less (*prices may change depending on the seller, location and time)

    Reasons to choose Klipsch Reference Premiere RP-500M over ELAC Debut 2.0 B6.2

    Sensitivity 93 dB vs 87 dB Play louder with same amount of amplification power
    Nominal Impedance 8 ohms vs 6 ohms Less selective with amplifiers
    Mounting Bracket Yes vs No Allows mounting on walls
    Height 343mm vs 375mm Easier to fit in smaller spaces
    Base Surface Area 416cm2 vs 522cm2 Takes less floor space
    ELAC Debut 2.0 B6.2 vs Klipsch RP-500M Specs Table
    Detailed comparison of specifications
    General ELAC Debut 2.0 B6.2 Klipsch Reference Premiere RP-500M
    Brand ELAC Klipsch
    Speaker Type Bookshelf speakers Bookshelf speakers
    Power Range up to 120 watts up to 75 watts
    Sensitivity 87 dB 93 dB
    Impedance 6 ohms 8 ohms
    Frequency Response 44-35k Hz 48-25k Hz
    Drivers
    Woofer Quantity 1 1
    Woofer Size 6.5" 5.25"
    Woofer Composition Woven Aramid-Fiber Cerametallic
    Woofer Surround Material Rubber Rubber
    Tweeter Size 1" 1"
    Tweeter Type Soft-Dome Tractrix Horn
    Aimable Tweeter No No
    Midrange Driver No No
    Crossover Frequency 2200Hz 1500Hz
    Firing Direction front rear
    Physical Specs
    Height 375.0mm (14.8") 343.0mm (13.5")
    Width 195.0mm (7.7") 173.0mm (6.8")
    Depth 268.0mm (10.6") 241.0mm (9.5")
    Weight 7.40kg (16.3lbs) 5.40kg (11.9lbs)
    Enclosure Ported Bass Reflex
    Finish MDF/Vinyl MDF/Wood-grain vinyl
    Available Colors Black Ebony, Walnut, Piano Black
    Mounting Bracket No Keyhole
    Recommended Stand Height 24-28" 28-30"
    Grille Yes Yes
    Moisture Resistancy No No
    Connections
    Biamp Inputs No No
    Other
    Parts Warranty 3 Years 5 Years
    Labor Warranty 3 Years 5 Years

    Most Popular Speakers
    Klipsch Reference R-51M
    Klipsch R-51M
    2-way | 93 dB | 8 ohms
    Wharfedale Elysian 2
    Wharfedale Elysian 2
    3-way | 89 dB | 4 ohms
    ELAC Debut 2.0 B6.2
    ELAC Debut 2.0 B6.2
    2-way | 87 dB | 6 ohms
    Bowers & Wilkins 606 S2 Anniversary Edition
    B&W 606 S2
    2-way | 88 dB | 8 ohms
    KEF Q150
    KEF Q150
    2-way | 86 dB | 8 ohms
    Klipsch Reference Premiere RP-500M
    Klipsch RP-500M
    2-way | 93 dB | 8 ohms
    Wharfedale EVO4.1
    Wharfedale EVO4.1
    2-way | 87 dB | 8 ohms
    Bowers & Wilkins 606
    B&W 606
    2-way | 88 dB | 8 ohms
    Copyright © 2025 by SpeakerDecision
    About Privacy Contact US Camera Decision

    Report a Correction