In this review, we will be comparing Debut 2.0 B5.2 and RP-500M, two Passive Bookshelf speakers from ELAC and Klipsch. Let's have a brief look at the main features
of ELAC Debut 2.0 B5.2 and Klipsch RP-500M first before getting into our more
detailed comparison.
What size room are the ELAC Debut 2.0 B5.2 and Klipsch RP-500M speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the ELAC Debut 2.0 B5.2 and Klipsch RP-500M compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Debut 2.0 B5.2 and RP-500M are 2-way speakers.
Driver |
ELAC Debut 2.0 B5.2 |
Klipsch RP-500M |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 5.25-inch
|
1 x 5.25-inch
|
Debut 2.0 B5.2 features a 1" Cloth Soft-dome Tweeter and 1 x 5.25" Woven Aramid-Fiber Woofer with a Crossover frequency at 2200Hz. On the other hand, the RP-500M features a 1" Tractrix Horn Tweeter and 1 x 5.25" Cerametallic Woofer with a Crossover frequency at 1500Hz.
Frequency Response
Debut 2.0 B5.2 has a frequency range of 46-35k Hz whereas RP-500M has a frequency range of 48-25k Hz. With a minimum frequency of 46Hz, the Debut 2.0 B5.2 can go slightly deeper then the RP-500M's min frequency of 48Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Debut 2.0 B5.2 is a 6 ohms speaker compared to the RP-500M which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. Debut 2.0 B5.2 sensitivity is rated at 86 dB and the RP-500M's is rated at 93 dB. This 7 dB difference makes the Klipsch RP-500M a more sensitive speaker compared to ELAC Debut 2.0 B5.2, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Debut 2.0 B5.2 can handle a max power of 120 watts RMS from the amp the whereas RP-500M has a max power handling value of 75 watts RMS, 45 watts less than the Debut 2.0 B5.2.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Debut 2.0 B5.2 features Single binding posts type posts and RP-500M has a Single binding posts type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Debut 2.0 B5.2 has a front firing port whereas RP-500M has a rear firing ports. ELAC Debut 2.0 B5.2's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Klipsch RP-500M with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Debut 2.0 B5.2's and Klipsch RP-500M's external dimensions. ELAC Debut 2.0 B5.2 has external dimensions of 341.0 x 180.0 x 234.0mm ( 13.4 x 7.0 x 9.2inch) whereas Klipsch RP-500M has external dimensions of 343.0 x 173.0 x 241.0mm ( 13.5 x 6.8 x 9.4inch) .
ELAC Debut 2.0 B5.2 is 2mm shorter and 7mm less deeper than Klipsch RP-500M but it is also 7mm wider.
Below you can see the front view size comparison of ELAC Debut 2.0 B5.2 and Klipsch RP-500M in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Debut 2.0 B5.2 is approximately 421.2cm2 / 65.3inch2 and base area of the Klipsch RP-500M is approximately 416.9cm2 / 64.6inch2. The Debut 2.0 B5.2 requires 1% more surface area than the RP-500M which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The ELAC Debut 2.0 B5.2 weighs 5.90kg / 13lbs and the Klipsch RP-500M weighs 5.40kg / 11.9lbs. This makes the Debut 2.0 B5.2 9% heavier than the RP-500M.
Here is a comparison of how Debut 2.0 B5.2 and RP-500M's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of ELAC Debut 2.0 B5.2?
Here are the items that are included inside the box of Debut 2.0 B5.2:
2 Bookshelf loudspeakers 2 Grilles Operating Instructions
What's in the Box of Klipsch RP-500M?
Here are the items that come with the RP-500M:
2 Bookshelf loudspeakers 2 Grilles (installed) 8 Self-adhesive rubber feet User Manual Important Safety Instructions Warranty Information
Max Input Power |
120 watts
vs
75 watts
|
Handle more power from your amplifier |
Low Frequency Response |
46 Hz
vs
48 Hz
|
Generates deeper bass |
High Frequency Response |
35k Hz
vs
25k Hz
|
Generates higher frequency |
Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
Height |
341mm
vs
343mm
|
Easier to fit in smaller spaces |
Price per pair* |
330USD
vs
579USD
|
costs less (*prices may change depending on the seller, location and time) |
Sensitivity |
93 dB
vs
86 dB
|
Play louder with same amount of amplification power |
Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
Mounting Bracket |
Yes
vs
No
|
Allows mounting on walls |
Base Surface Area |
416cm2 (173x241mm)
vs
421cm2 (180x234mm)
|
Takes less floor space |
General |
ELAC Debut 2.0 B5.2 |
Klipsch Reference Premiere RP-500M |
Brand |
ELAC |
Klipsch |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
120 watts |
up to 75 watts |
Sensitivity |
86 dB |
93 dB |
Impedance |
6 ohms |
8 ohms |
Frequency Response |
46-35k Hz |
48-25k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
5.25" |
5.25" |
Woofer Composition |
Woven Aramid-Fiber |
Cerametallic |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
Soft-dome |
Tractrix Horn |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2200Hz |
1500Hz |
Firing Direction |
front |
rear |
Physical Specs |
|
|
Height |
341.0mm (13.4") |
343.0mm (13.5") |
Width |
180.0mm (7.1") |
173.0mm (6.8") |
Depth |
234.0mm (9.2") |
241.0mm (9.5") |
Weight |
5.90kg (13lbs) |
5.40kg (11.9lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
CARB2 Rated MDF/Vinyl |
MDF/Wood-grain vinyl |
Available Colors |
Black |
Ebony, Walnut, Piano Black |
Mounting Bracket |
No |
Keyhole |
Recommended Stand Height |
24-28" |
28-30" |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
No |
Other |
|
|
Parts Warranty |
3 Years |
5 Years |
Labor Warranty |
3 Years |
5 Years |