In this review, we will be comparing Focus 20 XD and RP-600M, two Bookshelf speakers from Dynaudio and Klipsch. The main difference between these two speakers is that the Dynaudio Focus 20 XD is a Powered speaker which means that it has a built-in amplifier inside the speaker body so you don't need an external power amp or an integrated amp whereas the Klipsch RP-600M is a Passive speaker so has to be matched with an amplifier to get any sound from it. Let's have a brief look at the main features
of Dynaudio Focus 20 XD and Klipsch RP-600M first before getting into our more
detailed comparison.
In the following sections, we will get into more detail in order to better understand how the Dynaudio Focus 20 XD and Klipsch RP-600M compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Focus 20 XD and RP-600M are 2-way speakers.
| Driver |
Dynaudio Focus 20 XD |
Klipsch RP-600M |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1.1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.7-inch
|
1 x 6.5-inch
|
Focus 20 XD features a 1.1" Coated-Silk Soft-Dome Tweeter and 1 x 6.7" Magnesium Silicate Polymer Woofer . On the other hand, the RP-600M features a 1" Tractrix Horn Tweeter and 1 x 6.5" Cerametallic Woofer with a Crossover frequency at 1500Hz.
Frequency Response
Focus 20 XD has a frequency range of 39-24k Hz whereas RP-600M has a frequency range of 45-25k Hz. With a minimum frequency of 39Hz, the Focus 20 XD can go significantly deeper on the low side and provide stronger bass compared to the RP-600M's min frequency of 45Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Cabinet Type and Port Position
Both Focus 20 XD and RP-600M have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Klipsch RP-600M Tractrix horn-shaped Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Dynaudio Focus 20 XD's and Klipsch RP-600M's external dimensions. Dynaudio Focus 20 XD has external dimensions of 362.0 x 198.4 x 308.0mm ( 14.25 x 7.8125 x 12.125inch) whereas Klipsch RP-600M has external dimensions of 399.0 x 202.0 x 301.0mm ( 15.7 x 7.9 x 11.8inch) .
Dynaudio Focus 20 XD is 3.6mm narrower and 37mm shorter than Klipsch RP-600M but it is also 7mm deeper.
Below you can see the front view size comparison of Dynaudio Focus 20 XD and Klipsch RP-600M in scale.
Comparison image of Dynaudio Focus 20 XD and Klipsch RP-600M Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Dynaudio Focus 20 XD is approximately 611.1cm2 / 94.7inch2 and base area of the Klipsch RP-600M is approximately 608.0cm2 / 94.2inch2. The Focus 20 XD requires 1% more surface area than the RP-600M which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Dynaudio Focus 20 XD and Klipsch RP-600M on a Media Console
What's in the Box of Dynaudio Focus 20 XD?
Here are the items that are included inside the box of Focus 20 XD:
2 Powered loudspeakers2 AC power cordsRemote controlSetup Manual
What's in the Box of Klipsch RP-600M?
Here are the items that come with the RP-600M:
2 Bookshelf loudspeakers2 Grilles (installed)8 Self-adhesive rubber feet4 Terminal jumpers (installed)User ManualImportant Safety InstructionsWarranty Information