In this review, we will be comparing Dymension DM60 and RP-8000F II, two Passive Floor-standing speakers from Definitive Technology and Klipsch.
Let's have a brief look at the main features
of Definitive Dymension DM60 and Klipsch RP-8000F II first before getting into our more
detailed comparison.
Definitive Dymension DM60 Key Specs
- 3-way Design
- 1" 2 x Hard-Dome Tweeter
- 4.5" Midrange
- 8" Polypropelene Woofer
- 34-23 kHz Frequency Response
- 88 dB Sensitivity
- Impedance: 4ohms
- Power Range:50-300watts
- Weight:27.20kg
- Dimensions (H x W x D): 1153.0" x 11.3" x 13.7"( 1153 x 287 x 349 mm )
Klipsch RP-8000F II Key Specs
- 2-way Design
- 1" Tractrix Horn Tweeter
- 2 x 8" Cerametallic cone Woofer
- 32-25k Hz Frequency Response
- 98 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 150watts
- Weight:28.00kg
- Dimensions (H x W x D): 1097.0" x 10-7/8" x 17-9/16"( 1097.0 x 277.0 x 447.0mm )
What size room are the Definitive Dymension DM60 and Klipsch RP-8000F II speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Definitive Dymension DM60 |
Klipsch RP-8000F II |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Good |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Definitive Dymension DM60 and Klipsch RP-8000F II compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Dymension DM60 is a 3-way design whereas the RP-8000F II is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Definitive Dymension DM60 |
Klipsch RP-8000F II |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
4 x 4.5-inch |
- |
|
Woofer
|
1 x 8-inch
|
2 x 8-inch
|
Dymension DM60 features a 1" aluminum oxide 2 x Hard-Dome Tweeter , a 4.5" Midrange and 1 x 8" Polypropelene Woofer . On the other hand, the RP-8000F II features a 1" titanium Tractrix Horn Tweeter and 2 x 8" Cerametallic cone Woofer with a Crossover frequency at 1630 Hz.
Frequency Response
Dymension DM60 has a frequency range of 34-23 kHz whereas RP-8000F II has a frequency range of 32-25k Hz. With a minimum frequency of 32Hz, the RP-8000F II can go slightly deeper then the Dymension DM60's min frequency of 34Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Definitive Dymension DM60
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Dymension DM60 is a 4 ohms speaker compared to the RP-8000F II which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Dymension DM60 can provide this impedance level.
These two speakers also have different sensitivity levels. Dymension DM60 sensitivity is rated at 88 dB and the RP-8000F II's is rated at 98 dB. This 10 dB difference makes the Klipsch RP-8000F II a more sensitive speaker compared to Definitive Dymension DM60, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Dymension DM60 can handle a max power of 300 watts RMS from the amp the whereas RP-8000F II has a max power handling value of 150 watts RMS, 150 watts less than the Dymension DM60.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RP-8000F II features Binding post posts which make bi-amping or bi-wiring possible. Dymension DM60 has a Binding post which doesn't feature bi-amping/bi-wiring.
Definitive Dymension DM60's Binding post terminals
Klipsch RP-8000F II's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Definitive Dymension DM60's and Klipsch RP-8000F II's external dimensions. Definitive Dymension DM60 has external dimensions of 1153 x 287 x 349 mm ( 45.4 x 11.3 x 13.7 in) whereas Klipsch RP-8000F II has external dimensions of 1097.0 x 277.0 x 447.0mm ( 43-3/16 x 10-7/8 x 17-9/16inch) .
Klipsch RP-8000F II is 10mm narrower and 56mm shorter than Definitive Dymension DM60 but it is also 98mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Definitive Dymension DM60 is approximately 1001.6cm2 / 155.2inch2 and base area of the Klipsch RP-8000F II is approximately 1238.2cm2 / 191.9inch2. The Dymension DM60 requires 19% less surface area than the RP-8000F II which gives it a small advantage on placement in tight spaces.