In this review, we will be comparing Dymension DM60 and Opticon 8 MK2, two Passive Floor-standing speakers from Definitive Technology and DALI.
Let's have a brief look at the main features
of Definitive Dymension DM60 and DALI Opticon 8 II first before getting into our more
detailed comparison.
Definitive Dymension DM60 Key Specs
- 3-way Design
- 1" 2 x Hard-Dome Tweeter
- 4.5" Midrange
- 8" Polypropelene Woofer
- 34-23 kHz Frequency Response
- 88 dB Sensitivity
- Impedance: 4ohms
- Power Range:50-300watts
- Weight:27.20kg
- Dimensions (H x W x D): 1153.0" x 11.3" x 13.7"( 1153 x 287 x 349 mm )
DALI Opticon 8 II Key Specs
- 3-way Design
- 17 x 45 mm ribbon + 1.125" Soft-dome + ribbon Hybrid Tweeter
- 6.5" Midrange
- 2 x 8" Wood Fiber Woofer
- 6.5" Midrange
- 38-30k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 4ohms
- Power Range:40-300watts
- Weight:37.10kg
- Dimensions (H x W x D): 1150.0" x 9-1/2" x 18-1/16"( 1150.0 x 245.0 x 459.0mm )
What size room are the Definitive Dymension DM60 and DALI Opticon 8 II speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Definitive Dymension DM60 |
DALI Opticon 8 II |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Definitive Dymension DM60 and DALI Opticon 8 II compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Dymension DM60 and Opticon 8 MK2 are 3-way speakers.
| Driver |
Definitive Dymension DM60 |
DALI Opticon 8 II |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
17 x 45 mm ribbon + 1.125-inch
|
|
Midrange
|
4 x 4.5-inch |
1 x 6.5-inch |
|
Woofer
|
1 x 8-inch
|
2 x 8-inch
|
Dymension DM60 features a 1" aluminum oxide 2 x Hard-Dome Tweeter , a 4.5" Midrange and 1 x 8" Polypropelene Woofer . On the other hand, the Opticon 8 MK2 features a 17 x 45 mm ribbon + 1.125" Soft-dome + ribbon Hybrid Tweeter , a 6.5" Midrange and 2 x 8" Wood Fiber Woofer with a Crossover frequency at 380Hz, 2200Hz and 14,000Hz.
Frequency Response
Dymension DM60 has a frequency range of 34-23 kHz whereas Opticon 8 MK2 has a frequency range of 38-30k Hz. With a minimum frequency of 34Hz, the Dymension DM60 can go slightly deeper then the Opticon 8 MK2's min frequency of 38Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Definitive Dymension DM60
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Dymension DM60 and Opticon 8 MK2 have the same Impedance of 4 ohms and their sensitivity is also same at 88 dB.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Dymension DM60 and the Dymension DM60 can provide this impedance level.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Opticon 8 MK2 features Post posts which make bi-amping or bi-wiring possible. Dymension DM60 has a Binding post which doesn't feature bi-amping/bi-wiring.
Definitive Dymension DM60's Binding post terminals
DALI Opticon 8 II's Post terminals allows Bi-amping or bi-wiring
DALI Opticon 8 II Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Definitive Dymension DM60's and DALI Opticon 8 II's external dimensions. Definitive Dymension DM60 has external dimensions of 1153 x 287 x 349 mm ( 45.4 x 11.3 x 13.7 in) whereas DALI Opticon 8 II has external dimensions of 1150.0 x 245.0 x 459.0mm ( 45-1/4 x 9-1/2 x 18-1/16inch) .
DALI Opticon 8 II is 42mm narrower and 3mm shorter than Definitive Dymension DM60 but it is also 110mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Definitive Dymension DM60 is approximately 1001.6cm2 / 155.2inch2 and base area of the DALI Opticon 8 II is approximately 1124.6cm2 / 174.3inch2. The Dymension DM60 requires 11% less surface area than the Opticon 8 MK2 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Definitive Dymension DM60 weighs 27.20kg / 59.8lbs and the DALI Opticon 8 II weighs 37.10kg / 81.6lbs. This makes the Opticon 8 MK2 36% heavier than the Dymension DM60.
Here is a comparison of how Dymension DM60 and Opticon 8 MK2's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
Definitive Dymension DM60
What's in the Box of Definitive Dymension DM60?
Here are the items that are included inside the box of Dymension DM60:
4 Adjustable hard floor glides 4 Adjustable carpet spikes
What's in the Box of DALI Opticon 8 II?
Here are the items that come with the Opticon 8 MK2:
Floorstanding loudspeakerGrille2 Binding post jumpers (pre-installed)4 Outrigger feet4 Spikes (with lock nuts)4 Rubber pads4 ScrewsHex-keyWrenchQuick Start GuideCongratulations Card
 Low Frequency Response |
34 Hz
vs
38 Hz
|
Generates deeper bass |
 Passive Radiator |
2 x 8-inch
vs
None
|
Increases the bass performance |
 Base Surface Area |
1001cm2
vs
1124cm2
|
Takes less floor space |
 Price per pair* |
2998USD
vs
4200USD
|
costs less (*prices may change depending on the seller, location and time) |
|
Number of Woofers |
2
vs
1
|
More woofers |
 High Frequency Response |
30k Hz
vs
23k Hz
|
Generates higher frequency |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Height |
1150mm
vs
1153mm
|
Easier to fit in smaller spaces |
| General |
Definitive Technology Dymension DM60 |
DALI Opticon 8 MK2 |
| Brand |
Definitive Technology |
DALI |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
50-300 watts |
40-300 watts |
| Sensitivity |
88 dB |
88 dB |
| Impedance |
4 ohms |
4 ohms |
| Frequency Response |
34-23 kHz |
38-30k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
2 |
| Woofer Size |
8" |
8" |
| Woofer Composition |
Polypropelene |
Wood Fiber |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
17 x 45 mm ribbon + 1.125" |
| Tweeter Type |
2 x Hard-Dome |
Soft-dome + ribbon Hybrid |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
4.5" |
6.5" |
| Crossover Frequency |
n/a |
380Hz, 2200Hz and 14,000Hz |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
1153.0mm (45.4") |
1150.0mm (45.3") |
| Width |
287.0mm (11.3") |
245.0mm (9.6") |
| Depth |
349.0mm (13.7") |
459.0mm (18.1") |
| Weight |
27.20kg (59.8lbs) |
37.10kg (81.6lbs) |
| Enclosure |
Passive Radiator |
Bass Reflex |
| Finish |
n/a |
MDF/Wood-grain vinyl |
| Available Colors |
Black |
Satin Black, Tobacco Oak, Satin White |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |