In this review, we will be comparing Dymension DM40 and R600, two Passive Floor-standing speakers from Definitive Technology and Polk Audio. Let's have a brief look at the main features
of Definitive Dymension DM40 and Polk R600 first before getting into our more
detailed comparison.
What size room are the Definitive Dymension DM40 and Polk R600 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Definitive Dymension DM40 and Polk R600 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Dymension DM40 and R600 are 2-way speakers.
| Driver |
Definitive Dymension DM40 |
Polk R600 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
4 x 4.5-inch
|
2 x 6.5-inch
|
Dymension DM40 features a 1" aluminum oxide 2 x Hard-Dome Tweeter and 4 x 4.5" Polypropelene Woofer . On the other hand, the R600 features a 1" Pinnacle Ring Radiator Tweeter and 2 x 6.5" Polypropylene Turbine Cone Woofer with a Crossover frequency at 2700Hz.
Frequency Response
Dymension DM40 has a frequency range of 55-23 kHz whereas R600 has a frequency range of 43-38k Hz. With a minimum frequency of 43Hz, the R600 can go significantly deeper on the low side and provide stronger bass compared to the Dymension DM40's min frequency of 55Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Definitive Dymension DM40
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Dymension DM40 is a 4 ohms speaker compared to the R600 which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Dymension DM40 can provide this impedance level.
These two speakers also have different sensitivity levels. Dymension DM40 sensitivity is rated at 87 dB and the R600's is rated at 87.5 dB. This 1 dB difference makes the Polk R600 a more sensitive speaker compared to Definitive Dymension DM40, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Dymension DM40 can handle a max power of 250 watts RMS from the amp the whereas R600 has a max power handling value of 200 watts RMS, 50 watts less than the Dymension DM40.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Dymension DM40 features Post type posts and R600 has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
Definitive Dymension DM40's Binding post terminals
Polk R600's Post terminals
Polk R600 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Definitive Dymension DM40's and Polk R600's external dimensions. Definitive Dymension DM40 has external dimensions of 950 x 261 x 255 mm ( 37.4 x 10.3 x 10.0 in) whereas Polk R600 has external dimensions of 1063.8 x 280.7 x 381.6mm ( 41.9 x 11 x 15inch) .
Polk R600 is clearly the larger of the two speakers. Its body is 19.7mm wider, 113.8mm taller and 126.6mm deeper than Definitive Dymension DM40.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Definitive Dymension DM40 is approximately 665.6cm2 / 103.2inch2 and base area of the Polk R600 is approximately 1071.2cm2 / 166.0inch2. The Dymension DM40 requires 38% less surface area than the R600 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Definitive Dymension DM40 weighs 17.30kg / 38.1lbs and the Polk R600 weighs 21.50kg / 47.3lbs. This makes the R600 24% heavier than the Dymension DM40.
Here is a comparison of how Dymension DM40 and R600's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
Definitive Dymension DM40
What's in the Box of Definitive Dymension DM40?
Here are the items that are included inside the box of Dymension DM40:
4 Adjustable hard floor glides 4 Adjustable carpet spikes
What's in the Box of Polk R600?
Here are the items that come with the R600:
Floorstanding loudspeaker
4 Outrigger feet (pre-installed)
4 Rubber feet (pre-installed)
4 Spike feet (pre-installed)
Grille
Hex-key
Owner's Manual
Online Registration
 Max Input Power |
250 watts
vs
200 watts
|
Handle more power from your amplifier |
 Number of Woofers |
4
vs
2
|
More woofers |
 Height |
950mm
vs
1063mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
665cm2 (261x255mm)
vs
1071cm2 (280x381mm)
|
Takes less floor space |
 Sensitivity |
88 dB
vs
87 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
| Woofer Size |
6.5 inches
vs
4.5 inches
|
Larger woofer |
| Low Frequency Response |
43 Hz
vs
55 Hz
|
Generates deeper bass |
 High Frequency Response |
38k Hz
vs
23k Hz
|
Generates higher frequency |
 Price per pair* |
1698USD
vs
1998USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Definitive Technology Dymension DM40 |
Polk Audio Reserve R600 |
| Brand |
Definitive Technology |
Polk Audio |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
50-250 watts |
25-200 watts |
| Sensitivity |
87 dB |
87.5 dB |
| Impedance |
4 ohms |
8 ohms |
| Impedance |
n/a |
4 ohms |
| Frequency Response |
55-23 kHz |
43-38k Hz |
Drivers |
|
|
| Woofer Quantity |
4 |
2 |
| Woofer Size |
4.5" |
6.5" |
| Woofer Composition |
Polypropelene |
Polypropylene Turbine Cone |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
2 x Hard-Dome |
Pinnacle Ring Radiator |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
2700Hz |
| Firing Direction |
n/a |
bottom |
Physical Specs |
|
|
| Height |
950.0mm (37.4") |
1063.8mm (41.9") |
| Width |
261.0mm (10.3") |
280.7mm (11.1") |
| Depth |
255.0mm (10") |
381.6mm (15") |
| Weight |
17.30kg (38.1lbs) |
21.50kg (47.3lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF/Vinyl |
| Available Colors |
Black |
Black, Walnut, White |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |