In this review, we will be comparing Dymension DM30 and Motion 50XTi, two Passive Center Channel speakers from Definitive Technology and MartinLogan.
Let's have a brief look at the main features
of Definitive Dymension DM30 and MartinLogan 50XTi first before getting into our more
detailed comparison.
Definitive Dymension DM30 Key Specs
- 3-way Design
- 1" Hard-Dome Tweeter
- 5.25" Midrange
- 8" Polypropelene Woofer
- 41-23 kHz Frequency Response
- 93 dB Sensitivity
- Impedance: 4ohms
- Power Range:50-300watts
- Weight:24.50kg
- Dimensions (H x W x D): 190.0" x 31.5" x 15.9"( 190 x 800 x 403 mm )
MartinLogan 50XTi Key Specs
- 3-way Design
- 1.25 x 2.4" Folded Motion XT Tweeter
- 2 x 6.5" Aluminum Woofer
- 50-25k Hz Frequency Response
- 94 dB Sensitivity
- Impedance: 4ohms
- Power Range:20-300watts
- Weight:13.86kg
- Dimensions (H x W x D): 196.0" x 23" x 13-5/8"( 196.0 x 585.0 x 347.0mm )
What size room are the Definitive Dymension DM30 and MartinLogan 50XTi speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Definitive Dymension DM30 |
MartinLogan 50XTi |
| Near-field |
Poor |
Poor |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Good |
Good |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Definitive Dymension DM30 and MartinLogan 50XTi compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Dymension DM30 and Motion 50XTi are 3-way speakers.
| Driver |
Definitive Dymension DM30 |
MartinLogan 50XTi |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1.25 x 2.4-inch
|
|
Midrange
|
4 x 5.25-inch |
- |
|
Woofer
|
1 x 8-inch
|
2 x 6.5-inch
|
Dymension DM30 features a 1" aluminum oxide Hard-Dome Tweeter , a 5.25" Midrange and 1 x 8" Polypropelene Woofer . On the other hand, the Motion 50XTi features a 1.25 x 2.4" Folded Motion XT Tweeter and 2 x 6.5" Aluminum Woofer with a Crossover frequency at 900Hz and 2200Hz.
Frequency Response
Dymension DM30 has a frequency range of 41-23 kHz whereas Motion 50XTi has a frequency range of 50-25k Hz. With a minimum frequency of 41Hz, the Dymension DM30 can go significantly deeper on the low side and provide stronger bass compared to the Motion 50XTi's min frequency of 50Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
Definitive Dymension DM30
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Dymension DM30 and Motion 50XTi have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Dymension DM30 sensitivity is rated at 93 dB and the Motion 50XTi's is at 94 dB. This 1 dB difference makes the MartinLogan 50XTi a more sensitive speaker compared to Definitive Dymension DM30, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Dymension DM30 and the Dymension DM30 can provide this impedance level.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Motion 50XTi features Custom 5-way bi-wire tool-less binding posts posts which make bi-amping or bi-wiring possible. Dymension DM30 has a Binding post which doesn't feature bi-amping/bi-wiring.
Definitive Dymension DM30's Binding post terminals
MartinLogan 50XTi's Custom 5-way bi-wire tool-less binding posts terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Definitive Dymension DM30's and MartinLogan 50XTi's external dimensions. Definitive Dymension DM30 has external dimensions of 190 x 800 x 403 mm ( 7.5 x 31.5 x 15.9 in) whereas MartinLogan 50XTi has external dimensions of 196.0 x 585.0 x 347.0mm ( 7-11/16 x 23 x 13-5/8inch) .
MartinLogan 50XTi is 215mm narrower and 56mm less deeper than Definitive Dymension DM30 but it is also 6mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Definitive Dymension DM30 is approximately 3224.0cm2 / 499.7inch2 and base area of the MartinLogan 50XTi is approximately 2030.0cm2 / 314.7inch2. The Dymension DM30 requires 59% more surface area than the Motion 50XTi which gives it a small disadvantage on placement in tight spaces.