In this review, we will be comparing Dymension DM20 and Monitor XT35, two Passive Center Channel speakers from Definitive Technology and Polk Audio. Let's have a brief look at the main features
of Definitive Dymension DM20 and Polk XT35 first before getting into our more
detailed comparison.
Definitive Dymension DM20 Key Specs
- 2-way Design
- 1" Hard-Dome Tweeter
- 4 x 4.5" Polypropelene Woofer
- 91-23 kHz Frequency Response
- 89 dB Sensitivity
- Impedance: 4ohms
- Power Range:50-200watts
- Weight:10.00kg
- Dimensions (H x W x D): 134.0" x 30.5" x 6.5"( 134 x 775 x 166 mm )
Polk XT35 Key Specs
- 2-way Design
- 1" High-res dome Tweeter
- 4 x 3" bi-laminate paper cone Woofer
- 57-40k Hz Frequency Response
- 87 dB Sensitivity
- Impedance: 8ohms
- Power Range:25-200watts
- Weight:6.36kg
- Dimensions (H x W x D): 107.0" x 24-7/16" x 5-9/16"( 107.0 x 621.0 x 142.0mm )
What size room are the Definitive Dymension DM20 and Polk XT35 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
Definitive Dymension DM20 |
Polk XT35 |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Definitive Dymension DM20 and Polk XT35 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Dymension DM20 and Monitor XT35 are 2-way speakers.
| Driver |
Definitive Dymension DM20 |
Polk XT35 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
4 x 4.5-inch
|
4 x 3-inch
|
Dymension DM20 features a 1" aluminum oxide Hard-Dome Tweeter and 4 x 4.5" Polypropelene Woofer . On the other hand, the Monitor XT35 features a 1" Terylene High-res dome Tweeter and 4 x 3" bi-laminate paper cone Woofer .
Frequency Response
Dymension DM20 has a frequency range of 91-23 kHz whereas Monitor XT35 has a frequency range of 57-40k Hz. With a minimum frequency of 57Hz, the Monitor XT35 can go significantly deeper on the low side and provide stronger bass compared to the Dymension DM20's min frequency of 91Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
Definitive Dymension DM20
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Dymension DM20 is a 4 ohms speaker compared to the Monitor XT35 which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Dymension DM20 can provide this impedance level.
These two speakers also have different sensitivity levels. Dymension DM20 sensitivity is rated at 89 dB and the Monitor XT35's is rated at 87 dB. This 2 dB difference makes the Definitive Dymension DM20 a more sensitive speaker compared to Polk XT35, hence will play louder with the same amount of watts.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Dymension DM20 features 5-Way post type posts and Monitor XT35 has a 5-Way post type posts. None of these speakers feature bi-amping/bi-wiring.
Definitive Dymension DM20's Binding post terminals
Polk XT35's 5-Way post terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Definitive Dymension DM20's and Polk XT35's external dimensions. Definitive Dymension DM20 has external dimensions of 134 x 775 x 166 mm ( 5.3 x 30.5 x 6.5 in) whereas Polk XT35 has external dimensions of 107.0 x 621.0 x 142.0mm ( 4-3/16 x 24-7/16 x 5-9/16inch) .
Definitive Dymension DM20 is clearly the larger of the two speakers. Its body is 154mm wider, 27mm taller and 24mm deeper than Polk XT35.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Definitive Dymension DM20 is approximately 1286.5cm2 / 199.4inch2 and base area of the Polk XT35 is approximately 881.8cm2 / 136.7inch2. The Dymension DM20 requires 46% more surface area than the Monitor XT35 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Definitive Dymension DM20 weighs 10.00kg / 22lbs and the Polk XT35 weighs 6.36kg / 14lbs. This makes the Dymension DM20 57% heavier than the Monitor XT35.
Here is a comparison of how Dymension DM20 and Monitor XT35's weights compare with the average, max and min weights in Passive Center Channel class.
Weight
All Center Channel Speakers
Definitive Dymension DM20
What's in the Box of Polk XT35?
Here are the items that come with the Monitor XT35:
Center-channel loudspeakerGrille (attached)4 Self-adhesive rubber feetOwners ManualOnline Product RegistrationWall-Mount Template