In this review, we will be comparing Demand D11 and Bronze 100, two Passive Bookshelf speakers from Definitive Technology and Monitor Audio. Let's have a brief look at the main features
of Definitive Demand D11 and Monitor Audio Bronze 100 first before getting into our more
detailed comparison.
What size room are the Definitive Demand D11 and Monitor Audio Bronze 100 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Definitive Demand D11 and Monitor Audio Bronze 100 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Demand D11 and Bronze 100 are 2-way speakers.
| Driver |
Definitive Demand D11 |
Monitor Audio Bronze 100 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 8-inch
|
Demand D11 features a 1" Hard-Dome Tweeter and 1 x 6.5" Polypropylene Woofer . On the other hand, the Bronze 100 features a 1" Hard-Dome Tweeter and 1 x 8" C-CAM Woofer with a Crossover frequency at 2200Hz.
Frequency Response
Demand D11 has a frequency range of 61-22k Hz whereas Bronze 100 has a frequency range of 37-30k Hz. With a minimum frequency of 37Hz, the Bronze 100 can go significantly deeper on the low side and provide stronger bass compared to the Demand D11's min frequency of 61Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Demand D11 and Bronze 100 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Demand D11 sensitivity is rated at 90 dB and the Bronze 100's is at 87 dB. This 3 dB difference makes the Definitive Demand D11 a more sensitive speaker compared to Monitor Audio Bronze 100, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Demand D11 can handle a max power of 200 watts RMS from the amp the whereas Bronze 100 has a max power handling value of 100 watts RMS, 100 watts less than the Demand D11.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Demand D11 and Bronze 100 features dual binding post speaker terminals for bi-amping or bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Definitive Demand D11's and Monitor Audio Bronze 100's external dimensions. Definitive Demand D11 has external dimensions of 332.0 x 186.0 x 329.0mm ( 13-1/16 x 7-5/16 x 12-15/16inch) whereas Monitor Audio Bronze 100 has external dimensions of 376.0 x 231.0 x 325.0mm ( 14.8 x 9.0 x 12.7inch) .
Definitive Demand D11 is 45mm narrower and 44mm shorter than Monitor Audio Bronze 100 but it is also 4mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Definitive Demand D11 is approximately 611.9cm2 / 94.8inch2 and base area of the Monitor Audio Bronze 100 is approximately 750.8cm2 / 116.4inch2. The Demand D11 requires 19% less surface area than the Bronze 100 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Definitive Demand D11 weighs 8.64kg / 19lbs and the Monitor Audio Bronze 100 weighs 7.80kg / 17.2lbs. This makes the Demand D11 11% heavier than the Bronze 100.
Here is a comparison of how Demand D11 and Bronze 100's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Definitive Demand D11?
Here are the items that are included inside the box of Demand D11:
Left bookshelf loudpseakerRight bookshelf loudspeaker2 Grilles4 Jumper-straps (pre-installed)Cleaning clothOwners Manual
What's in the Box of Monitor Audio Bronze 100?
Here are the items that come with the Bronze 100:
2 Bookshelf loudspeakers 2 Grilles 4 Terminal-jumpers (pre-installed) 2 Foam port plugs 8 Self-adhesive rubber feet Hex-key Quick Start Guide Important Safety Instructions
 Max Input Power |
200 watts
vs
100 watts
|
Handle more power from your amplifier |
 Sensitivity |
90 dB
vs
87 dB
|
Play louder with same amount of amplification power |
 Height |
332mm
vs
376mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
611cm2 (186x329mm)
vs
750cm2 (231x325mm)
|
Takes less floor space |
 Woofer Size |
8 inches
vs
6.5 inches
|
Larger woofer |
| Low Frequency Response |
37 Hz
vs
61 Hz
|
Generates deeper bass |
 High Frequency Response |
30k Hz
vs
22k Hz
|
Generates higher frequency |
 Price per pair* |
675USD
vs
999USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Definitive Technology Demand Series D11 |
Monitor Audio Bronze 100 |
| Brand |
Definitive Technology |
Monitor Audio |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
20-200 watts |
30-100 watts |
| Sensitivity |
90 dB |
87 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
n/a |
4.5 ohms |
| Frequency Response |
61-22k Hz |
37-30k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6.5" |
8" |
| Woofer Composition |
Polypropylene |
C-CAM |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Hard-Dome |
Hard-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
2200Hz |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
332.0mm (13.1") |
376.0mm (14.8") |
| Width |
186.0mm (7.3") |
231.0mm (9.1") |
| Depth |
329.0mm (13") |
325.0mm (12.8") |
| Weight |
8.64kg (19lbs) |
7.80kg (17.2lbs) |
| Enclosure |
Passive Radiator |
Bass Reflex |
| Finish |
MDF/Aluminum |
MDF/Wood-grain vinyl |
| Available Colors |
Gloss White,Piano Black |
Walnut, Black, White, Urban Grey |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
24-28" |
22-26" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |