In this review, we will be comparing DALI Spektor 6 and R-820F, two Passive Floor-standing speakers from DALI and Klipsch.
Let's have a brief look at the main features
of DALI Spektor 6 and Klipsch R-820F first before getting into our more
detailed comparison.
DALI Spektor 6 Key Specs
- 2-way Design
- 1" Soft-Dome Tweeter
- 2 x 6.5" Wood Fiber Woofer
- 43-26k Hz Frequency Response
- 88.5 dB Sensitivity
- Impedance: 6ohms
- Power Range:30-150watts
- Weight:13.80kg
- Dimensions (H x W x D): 972.0" x 7.7" x 12.3"( 972.0 x 195.0 x 313.0mm )
Klipsch R-820F Key Specs
- 2-way Design
- 1" Tweeter
- 2 x 8" Copper-spun IMG Woofer
- 35-21k Hz Frequency Response
- 97 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 150watts
- Weight:24.55kg
- Dimensions (H x W x D): 1096.0" x 10-7/8" x 16-3/4"( 1096.0 x 277.0 x 426.0mm )
What size room are the DALI Spektor 6 and Klipsch R-820F speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
DALI Spektor 6 |
Klipsch R-820F |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Good |
Good |
| Large Room |
Good |
Good |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the DALI Spektor 6 and Klipsch R-820F compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both DALI Spektor 6 and R-820F are 2-way speakers.
| Driver |
DALI Spektor 6 |
Klipsch R-820F |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 6.5-inch
|
2 x 8-inch
|
DALI Spektor 6 features a 1" Soft-Dome Tweeter and 2 x 6.5" Wood Fiber Woofer with a Crossover frequency at 2500Hz. On the other hand, the R-820F features a 1" Tweeter and 2 x 8" Copper-spun IMG Woofer .
Frequency Response
DALI Spektor 6 has a frequency range of 43-26k Hz whereas R-820F has a frequency range of 35-21k Hz. With a minimum frequency of 35Hz, the R-820F can go significantly deeper on the low side and provide stronger bass compared to the DALI Spektor 6's min frequency of 43Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
DALI Spektor 6 is a 6 ohms speaker compared to the R-820F which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. DALI Spektor 6 sensitivity is rated at 88.5 dB and the R-820F's is rated at 97 dB. This 8 dB difference makes the Klipsch R-820F a more sensitive speaker compared to DALI Spektor 6, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
DALI Spektor 6 features Post type posts and R-820F has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare DALI Spektor 6's and Klipsch R-820F's external dimensions. DALI Spektor 6 has external dimensions of 972.0 x 195.0 x 313.0mm ( 38.3 x 7.7 x 12.3inch) whereas Klipsch R-820F has external dimensions of 1096.0 x 277.0 x 426.0mm ( 43-1/8 x 10-7/8 x 16-3/4inch) .
Klipsch R-820F is clearly the larger of the two speakers. Its body is 82mm wider, 124mm taller and 113mm deeper than DALI Spektor 6.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the DALI Spektor 6 is approximately 610.4cm2 / 94.6inch2 and base area of the Klipsch R-820F is approximately 1180.0cm2 / 182.9inch2. The DALI Spektor 6 requires 48% less surface area than the R-820F which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The DALI Spektor 6 weighs 13.80kg / 30.4lbs and the Klipsch R-820F weighs 24.55kg / 54lbs. This makes the R-820F 78% heavier than the DALI Spektor 6.
Here is a comparison of how DALI Spektor 6 and R-820F's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of DALI Spektor 6?
Here are the items that are included inside the box of DALI Spektor 6:
Floorstanding loudspeaker GrilleRubber Feet4 Spike-feetManual
What's in the Box of Klipsch R-820F?
Here are the items that come with the R-820F:
Floorstanding loudspeakerGrille (installed)2 Feet4 ScrewsQuick Setup GuideImportant Safety InstructionsWarranty InformationLoudspeaker Feet note
 High Frequency Response |
26k Hz
vs
21k Hz
|
Generates higher frequency |
 Height |
972mm
vs
1096mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
610cm2
vs
1180cm2
|
Takes less floor space |
 Sensitivity |
97 dB
vs
89 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
 Woofer Size |
8 inches
vs
6.5 inches
|
Larger woofer |
|
Low Frequency Response |
35 Hz
vs
43 Hz
|
Generates deeper bass |
| General |
DALI Spektor 6 |
Klipsch Reference R-820F |
| Brand |
DALI |
Klipsch |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
30-150 watts |
up to 150 watts |
| Sensitivity |
88.5 dB |
97 dB |
| Impedance |
6 ohms |
8 ohms |
| Frequency Response |
43-26k Hz |
35-21k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6.5" |
8" |
| Woofer Composition |
Wood Fiber |
Copper-spun IMG |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Soft-Dome |
n/a |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2500Hz |
n/a |
| Firing Direction |
rear |
n/a |
Physical Specs |
|
|
| Height |
972.0mm (38.3") |
1096.0mm (43.1") |
| Width |
195.0mm (7.7") |
277.0mm (10.9") |
| Depth |
313.0mm (12.3") |
426.0mm (16.8") |
| Weight |
13.80kg (30.4lbs) |
24.55kg (54lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Black Ash, Walnut, White |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |