In this review, we will be comparing two different type of speakers . DALI Opticon LCR MK2 is a On-Wall speaker whereas the LINTON Heritage is a Bookshelf speaker.
Let's have a brief look at the main features
of DALI Opticon LCR II and Wharfedale LINTON first before getting into our more
detailed comparison.
DALI Opticon LCR II Key Specs
- 3-way Design
- 17 x 45 mm ribbon + 1.125" Soft-dome + ribbon Hybrid Tweeter
- 6.5" Wood Fiber Woofer
- 70-30k Hz Frequency Response
- 89 dB Sensitivity
- Impedance: 4ohms
- Power Range:30-150watts
- Weight:8.00kg
- Dimensions (H x W x D): 483.0" x 11-1/4" x 5"( 483.0 x 286.0 x 127.0mm )
Wharfedale LINTON Key Specs
- 3-way Design
- 1" Soft-dome Tweeter
- 5" Midrange
- 8" Woven Kevlar Woofer
- 5" Midrange
- 40-20k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 6ohms
- Power Range:25-200watts
- Weight:18.40kg
- Dimensions (H x W x D): 565.0" x 11.8" x 14.2"( 565.0 x 300.0 x 360.0mm )
What size room are the DALI Opticon LCR II and Wharfedale LINTON speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
DALI Opticon LCR II |
Wharfedale LINTON |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the DALI Opticon LCR II and Wharfedale LINTON compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Opticon LCR MK2 and LINTON Heritage are 3-way speakers.
| Driver |
DALI Opticon LCR II |
Wharfedale LINTON |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
17 x 45 mm ribbon + 1.125-inch
|
1-inch
|
|
Midrange
|
- |
1 x 5-inch |
|
Woofer
|
1 x 6.5-inch
|
1 x 8-inch
|
Opticon LCR MK2 features a 17 x 45 mm ribbon + 1.125" Soft-dome + ribbon Hybrid Tweeter and 1 x 6.5" Wood Fiber Woofer with a Crossover frequency at 2800Hz and 14.000Hz. On the other hand, the LINTON Heritage features a 1" woven textile Soft-dome Tweeter , a 5" Midrange and 1 x 8" Woven Kevlar Woofer with a Crossover frequency at 630Hz and 2400Hz.
Frequency Response
Opticon LCR MK2 has a frequency range of 70-30k Hz whereas LINTON Heritage has a frequency range of 40-20k Hz. With a minimum frequency of 40Hz, the LINTON Heritage can go significantly deeper on the low side and provide stronger bass compared to the Opticon LCR MK2's min frequency of 70Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the On-Wall class in our database.
Low Frequency
On-Wall Speakers
High Frequency
On-Wall Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Opticon LCR MK2 is a 4 ohms speaker compared to the LINTON Heritage which has a nominal impedance of 6 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Opticon LCR MK2 can provide this impedance level.
These two speakers also have different sensitivity levels. Opticon LCR MK2 sensitivity is rated at 89 dB and the LINTON Heritage's is rated at 90 dB. This 1 dB difference makes the Wharfedale LINTON a more sensitive speaker compared to DALI Opticon LCR II, hence will play louder with the same amount of watts.
Sensitivity
On-Wall Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Opticon LCR MK2 can handle a max power of 200 watts RMS from the amp the whereas Opticon LCR MK2 has a max power handling value of 150 watts RMS , 50 watts less than the LINTON Heritage.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Opticon LCR MK2 features Post type posts and LINTON Heritage has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
DALI Opticon LCR II's Post terminals
Wharfedale LINTON's Post terminals
Cabinet Type and Port Position
Both Opticon LCR MK2 and LINTON Heritage have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare DALI Opticon LCR II's and Wharfedale LINTON's external dimensions. DALI Opticon LCR II has external dimensions of 483.0 x 286.0 x 127.0mm ( 19 x 11-1/4 x 5inch) whereas Wharfedale LINTON has external dimensions of 565.0 x 300.0 x 360.0mm ( 22.2 x 11.8 x 12.9inch) .
Wharfedale LINTON is clearly the larger of the two speakers. Its body is 14mm wider, 82mm taller and 233mm deeper than DALI Opticon LCR II.
Below you can see the front view size comparison of DALI Opticon LCR II and Wharfedale LINTON in scale.
Comparison image of DALI Opticon LCR II and Wharfedale LINTON Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the DALI Opticon LCR II is approximately 363.2cm2 / 56.3inch2 and base area of the Wharfedale LINTON is approximately 990.0cm2 / 153.5inch2. The Opticon LCR MK2 requires 63% less surface area than the LINTON Heritage which gives it a small advantage on placement in tight spaces.
What's in the Box of DALI Opticon LCR II?
Here are the items that are included inside the box of Opticon LCR MK2:
LCR loudspeakerGrille4 Rubber bumpersHex-keyQuick Start GuideCongratulations Card
What's in the Box of Wharfedale LINTON?
Here are the items that come with the LINTON Heritage:
Bookshelf loudspeaker Grille (pre-installed) 4 Self-adhesive rubber feet Pair of white gloves User's Manual
High Frequency Response 
Mounting Bracket 
Height 
Base Surface Area 
Max Input Power 
Sensitivity 
Nominal Impedance 
Woofer Size 
Price per pair*