In this review, we will be comparing Oberon 7 and S60, two Passive Floor-standing speakers from DALI and Polk Audio. Let's have a brief look at the main features
of DALI Oberon 7 and Polk S60 first before getting into our more
detailed comparison.
What size room are the DALI Oberon 7 and Polk S60 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the DALI Oberon 7 and Polk S60 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Oberon 7 and S60 are 2-way speakers.
| Driver |
DALI Oberon 7 |
Polk S60 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1.125-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 7-inch
|
3 x 6.5-inch
|
Oberon 7 features a 1.125" Soft-Dome Tweeter and 2 x 7" Wood Fiber Woofer with a Crossover frequency at 2300Hz. On the other hand, the S60 features a 1" Terylene Dome Tweeter and 3 x 6.5" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz.
Frequency Response
Oberon 7 has a frequency range of 36-26k Hz whereas S60 has a frequency range of 26-40k Hz. With a minimum frequency of 26Hz, the S60 can go significantly deeper on the low side and provide stronger bass compared to the Oberon 7's min frequency of 36Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Oberon 7 is a 6 ohms speaker compared to the S60 which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. Oberon 7 sensitivity is rated at 88.5 dB and the S60's is rated at 90 dB. This 1 dB difference makes the Polk S60 a more sensitive speaker compared to DALI Oberon 7, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Oberon 7 can handle a max power of 300 watts RMS from the amp the whereas Oberon 7 has a max power handling value of 180 watts RMS , 120 watts less than the S60.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
S60 features 5-way post posts which make bi-amping or bi-wiring possible. Oberon 7 has a Post which doesn't feature bi-amping/bi-wiring.
DALI Oberon 7's Post terminals
Polk S60's 5-way post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Oberon 7 has a rear firing port whereas S60 has a bottom firing ports. Polk S60's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to DALI Oberon 7 with its rear-firing port.
Polk S60 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare DALI Oberon 7's and Polk S60's external dimensions. DALI Oberon 7 has external dimensions of 1016.0 x 200.0 x 329.0mm ( 40 x 7-7/8 x 12-15/16inch) whereas Polk S60 has external dimensions of 1131.0 x 299.0 x 401.0mm ( 44-1/2 x 11-3/4 x 15-3/4inch) .
Polk S60 is clearly the larger of the two speakers. Its body is 99mm wider, 115mm taller and 72mm deeper than DALI Oberon 7.
Below you can see the front view size comparison of DALI Oberon 7 and Polk S60 in scale.
Comparison image of DALI Oberon 7 and Polk S60 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the DALI Oberon 7 is approximately 658.0cm2 / 102.0inch2 and base area of the Polk S60 is approximately 1199.0cm2 / 185.8inch2. The Oberon 7 requires 45% less surface area than the S60 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The DALI Oberon 7 weighs 14.80kg / 32.6lbs and the Polk S60 weighs 23.60kg / 51.9lbs. This makes the S60 59% heavier than the Oberon 7.
Here is a comparison of how Oberon 7 and S60's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of DALI Oberon 7?
Here are the items that are included inside the box of Oberon 7:
Floorstanding loudspeakerGrille4 Rubber feet4 Spike-feet4 Hex-nutsManual
What's in the Box of Polk S60?
Here are the items that come with the S60:
Floorstanding loudspeakerGrille (attached)4 Feet (pre-installed)Owners ManualOnline Product Registration
 Woofer Size |
7 inches
vs
6.5 inches
|
Larger woofer |
 Height |
1016mm
vs
1131mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
658cm2 (200x329mm)
vs
1199cm2 (299x401mm)
|
Takes less floor space |
 Max Input Power |
300 watts
vs
180 watts
|
Handle more power from your amplifier |
 Sensitivity |
90 dB
vs
89 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
| Number of Woofers |
3
vs
2
|
More woofers |
| Low Frequency Response |
26 Hz
vs
36 Hz
|
Generates deeper bass |
 High Frequency Response |
40k Hz
vs
26k Hz
|
Generates higher frequency |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Price per pair* |
898USD
vs
1700USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
DALI Oberon 7 |
Polk Audio Signature S60 |
| Brand |
DALI |
Polk Audio |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
30-180 watts |
20-300 watts |
| Sensitivity |
88.5 dB |
90 dB |
| Impedance |
6 ohms |
8 ohms |
| Frequency Response |
36-26k Hz |
26-40k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
3 |
| Woofer Size |
7" |
6.5" |
| Woofer Composition |
Wood Fiber |
Mica-reinforced polypropylene |
| Woofer Surround Material |
Rubber |
Butyl rubber |
| Tweeter Size |
1.125" |
1" |
| Tweeter Type |
Soft-Dome |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2300Hz |
2500Hz |
| Firing Direction |
rear |
bottom |
Physical Specs |
|
|
| Height |
1016.0mm (40") |
1131.0mm (44.5") |
| Width |
200.0mm (7.9") |
299.0mm (11.8") |
| Depth |
329.0mm (13") |
401.0mm (15.8") |
| Weight |
14.80kg (32.6lbs) |
23.60kg (51.9lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
Meddite MDF |
| Available Colors |
Black Ash, Light Oak, Dark Walnut, White |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |