In this review, we will be comparing S400 MKII and RP-600M, two Passive Bookshelf speakers from Buchardt and Klipsch.
Let's have a brief look at the main features
of Buchardt S400 MKII and Klipsch RP-600M first before getting into our more
detailed comparison.
Buchardt S400 MKII Key Specs
- 2-way Design
- 0.74" aluminum waveguide Tweeter
- 6" paper Woofer
- 33-40k HZ Frequency Response
- 88 dB Sensitivity
- Impedance: 4ohms
- Power Range:40-200watts
- Weight:7.50kg
- Dimensions (H x W x D): 365.0" x 7" x 11"( 365.0 x 180.0 x 280.0mm )
Klipsch RP-600M Key Specs
- 2-way Design
- 1" Tractrix Horn Tweeter
- 6.5" Cerametallic Woofer
- 45-25k Hz Frequency Response
- 96 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 100watts
- Weight:7.30kg
- Dimensions (H x W x D): 399.0" x 7.9" x 11.8"( 399.0 x 202.0 x 301.0mm )
What size room are the Buchardt S400 MKII and Klipsch RP-600M speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Buchardt S400 MKII |
Klipsch RP-600M |
| Near-field |
Poor |
Average |
| Small Room |
Average |
Good |
| Mid-size Room |
Good |
Average |
| Large Room |
Average |
Poor |
| Very Large Room |
Poor |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Buchardt S400 MKII and Klipsch RP-600M compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both S400 MKII and RP-600M are 2-way speakers.
| Driver |
Buchardt S400 MKII |
Klipsch RP-600M |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
0.74-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6-inch
|
1 x 6.5-inch
|
S400 MKII features a 0.74" fine weave soft fabric textile aluminum waveguide Tweeter and 1 x 6" paper Woofer with a Crossover frequency at 1800Hz. On the other hand, the RP-600M features a 1" Tractrix Horn Tweeter and 1 x 6.5" Cerametallic Woofer with a Crossover frequency at 1500Hz.
Frequency Response
S400 MKII has a frequency range of 33-40k HZ whereas RP-600M has a frequency range of 45-25k Hz. With a minimum frequency of 33Hz, the S400 MKII can go significantly deeper on the low side and provide stronger bass compared to the RP-600M's min frequency of 45Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
S400 MKII is a 4 ohms speaker compared to the RP-600M which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the S400 MKII can provide this impedance level.
These two speakers also have different sensitivity levels. S400 MKII sensitivity is rated at 88 dB and the RP-600M's is rated at 96 dB. This 8 dB difference makes the Klipsch RP-600M a more sensitive speaker compared to Buchardt S400 MKII, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
S400 MKII can handle a max power of 200 watts RMS from the amp the whereas RP-600M has a max power handling value of 100 watts RMS, 100 watts less than the S400 MKII.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Klipsch RP-600M Tractrix horn-shaped Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Buchardt S400 MKII's and Klipsch RP-600M's external dimensions. Buchardt S400 MKII has external dimensions of 365.0 x 180.0 x 280.0mm ( 14.4 x 7 x 11inch) whereas Klipsch RP-600M has external dimensions of 399.0 x 202.0 x 301.0mm ( 15.7 x 7.9 x 11.8inch) .
Klipsch RP-600M is clearly the larger of the two speakers. Its body is 22mm wider, 34mm taller and 21mm deeper than Buchardt S400 MKII.
Below you can see the front view size comparison of Buchardt S400 MKII and Klipsch RP-600M in scale.
Comparison image of Buchardt S400 MKII and Klipsch RP-600M Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Buchardt S400 MKII is approximately 504.0cm2 / 78.1inch2 and base area of the Klipsch RP-600M is approximately 608.0cm2 / 94.2inch2. The S400 MKII requires 17% less surface area than the RP-600M which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Buchardt S400 MKII and Klipsch RP-600M on a Media Console