In this review, we will be comparing P300 and AE300, two Passive Bookshelf speakers from Buchardt and Acoustic Energy.
Let's have a brief look at the main features
of Buchardt P300 and AE300 first before getting into our more
detailed comparison.
Buchardt P300 Key Specs
- 2-way Design
- 0.74" aluminum waveguide Tweeter
- 6" paper Woofer
- 37-40k HZ Frequency Response
- 86 dB Sensitivity
- Impedance: 4ohms
- Power Range:50 - 200watts
- Weight:6.30kg
- Dimensions (H x W x D): 365.0" x 7" x 11"( 365.0 x 180.0 x 280.0mm )
AE300 Key Specs
- 2-way Design
- 1.1" dome with waveguide Tweeter
- 5.2" ceramic aluminium sandwich Woofer
- 45Hz - 30kHz Frequency Response
- 86 dB Sensitivity
- Impedance: 6ohms
- Power Range:up to 100watts
- Weight:6.50kg
- Dimensions (H x W x D): 300.0" x 6.9" x 10.2"( 300.0 x 175.0 x 260.0mm )
What size room are the Buchardt P300 and AE300 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Buchardt P300 |
AE300 |
| Near-field |
Poor |
Average |
| Small Room |
Average |
Good |
| Mid-size Room |
Good |
Average |
| Large Room |
Average |
Poor |
| Very Large Room |
Poor |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Buchardt P300 and AE300 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both P300 and AE300 are 2-way speakers.
| Driver |
Buchardt P300 |
AE300 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
0.74-inch
|
1.1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6-inch
|
1 x 5.2-inch
|
P300 features a 0.74" Custom fine weave soft fabric textile with CDC aluminum waveguide aluminum waveguide Tweeter and 1 x 6" paper Woofer with a Crossover frequency at 2900Hz. On the other hand, the AE300 features a 1.1" aluminium dome with waveguide Tweeter and 1 x 5.2" ceramic aluminium sandwich Woofer with a Crossover frequency at 2800Hz.
Frequency Response
P300 has a frequency range of 37-40k HZ whereas AE300 has a frequency range of 45Hz - 30kHz. With a minimum frequency of 37Hz, the P300 can go significantly deeper on the low side and provide stronger bass compared to the AE300's min frequency of 45Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
P300 is a 4 ohms speaker compared to the AE300 which has a nominal impedance of 6 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the P300 can provide this impedance level.
On the other hand, they have the same sensitivity of 86 dBdB.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
P300 can handle a max power of 200 watts RMS from the amp the whereas AE300 has a max power handling value of 100 watts RMS, 100 watts less than the P300.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Buchardt P300's and AE300's external dimensions. Buchardt P300 has external dimensions of 365.0 x 180.0 x 280.0mm ( 14.4 x 7 x 11inch) whereas AE300 has external dimensions of 300.0 x 175.0 x 260.0mm ( 11.4 x 6.9 x 10.2inch) .
Buchardt P300 is clearly the larger of the two speakers. Its body is 5mm wider, 65mm taller and 20mm deeper than AE300.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Buchardt P300 is approximately 504.0cm2 / 78.1inch2 and base area of the AE300 is approximately 455.0cm2 / 70.5inch2. The P300 requires 11% more surface area than the AE300 which gives it a small disadvantage on placement in tight spaces.