In this review, we will be comparing A10 and LS50 Wireless, two Powered Bookshelf speakers from Buchardt and KEF. Being Powered speakers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features
of Buchardt A10 and KEF LS50 Wireless first before getting into our more
detailed comparison.
In the following sections, we will get into more detail in order to better understand how the Buchardt A10 and KEF LS50 Wireless compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both A10 and LS50 Wireless are 2-way speakers.
| Driver |
Buchardt A10 |
KEF LS50 Wireless |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
0.74-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 5.25-inch
|
A10 features a 0.74" Aluminum Dome with waveguide Tweeter and 1 x 6.5" paper Woofer with a Crossover frequency at 2800Hz. On the other hand, the LS50 Wireless features a 1" Aluminum Hard-Dome Tweeter and 1 x 5.25" Magnesium/aluminum alloy Woofer .
Frequency Response
A10 has a frequency range of 28-40k Hz whereas LS50 Wireless has a frequency range of 79-28k Hz. With a minimum frequency of 28Hz, the A10 can go significantly deeper on the low side and provide stronger bass compared to the LS50 Wireless's min frequency of 79Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Cabinet Type and Port Position
A10 has a front firing port whereas LS50 Wireless has a rear firing ports. Buchardt A10's front-firing port gives more flexibility in placement in regards to proximity to walls compared to KEF LS50 Wireless with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Buchardt A10's and KEF LS50 Wireless's external dimensions. Buchardt A10 has external dimensions of 370 x 180.0 x 245.0mm ( 14.6 x 7 x 11inch) whereas KEF LS50 Wireless has external dimensions of 301.6 x 200.0 x 336.5mm ( 11.875 x 7.875 x 13.25inch) .
Buchardt A10 is 20mm narrower and 91.5mm less deeper than KEF LS50 Wireless but it is also 68.4mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Buchardt A10 is approximately 441.0cm2 / 68.4inch2 and base area of the KEF LS50 Wireless is approximately 673.0cm2 / 104.3inch2. The A10 requires 34% less surface area than the LS50 Wireless which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Buchardt A10 weighs 6.80kg / 15lbs and the KEF LS50 Wireless weighs 10.00kg / 22lbs. This makes the LS50 Wireless 47% heavier than the A10.
Here is a comparison of how A10 and LS50 Wireless's weights compare with the average, max and min weights in Powered Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of KEF LS50 Wireless?
Here are the items that come with the LS50 Wireless:
Wireless powered speaker (Right)Wireless powered speaker (Left)Two 6.5-feet AC power cords10-feet Cat-6 interconnect speaker cable6.5-feet USB-B to USB-A cable42
 Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
| Low Frequency Response |
28 Hz
vs
79 Hz
|
Generates deeper bass |
 High Frequency Response |
40k Hz
vs
28k Hz
|
Generates higher frequency |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 Base Surface Area |
441cm2 (180x245mm)
vs
673cm2 (200x336mm)
|
Takes less floor space |
 XLR Connection |
Yes
vs
No
|
Connection via XLR input |
 Handheld Remote |
Yes
vs
No
|
Control the speaker by the included RC |
 App-Based Control |
Apple iOS, Android
vs
None
|
Control the speaker via an app |
 Height |
301mm
vs
370mm
|
Easier to fit in smaller spaces |
 Ethernet Connection |
Yes
vs
No
|
High quality streaming over Ethernet |
 USB Port |
USB-B
vs
No
|
USB port adds flexibility |
 RCA Connection |
Yes
vs
No
|
Connection via RCA input |
 Digital Input |
Optical
vs
No
|
Connect digital inputs directly |
| General |
Buchardt A10 |
KEF LS50 Wireless |
| Brand |
Buchardt |
KEF |
| Speaker Type |
Powered Stereo Speakers |
Powered Stereo Speakers |
| Frequency Response |
28-40k Hz |
79-28k Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
200-watt RMS |
230-watt RMS |
| Max Bit Depth |
24-bit |
24-bit |
| Max Sample Rate |
192kHZ |
192 kHz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6.5" |
5.25" |
| Woofer Composition |
paper |
Magnesium/aluminum alloy |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
0.74" |
1" |
| Tweeter Type |
Dome with waveguide |
Hard-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2800Hz |
n/a |
| Firing Direction |
front |
rear |
Physical Specs |
|
|
| Height |
370.0mm (14.6") |
301.6mm (11.9") |
| Width |
180.0mm (7.1") |
200.0mm (7.9") |
| Depth |
245.0mm (9.6") |
336.5mm (13.2") |
| Weight |
6.80kg (15lbs) |
10.00kg (22lbs) |
| Enclosure |
Acoustic Suspension |
Bass Reflex |
| Finish |
Solid wood |
n/a |
| Available Colors |
Black,White, Walnut, Oak, Ash |
n/a |
| Mounting Bracket |
No |
No |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Aux Inputs |
XLR |
RCA |
| USB Port |
Service Only |
USB-B |
| Phone Input |
No |
No |
| Subwoofer Output |
n/a |
Wired |
| Digital Input |
No |
Optical |
| HDMI Input |
No |
No |
| Headphone Jack |
No |
No |
| Ethernet Port |
No |
Yes |
Other |
|
|
| Parts Warranty |
10 years on speakers / 2 years on electronics (4 years if registered) |
1 Year |
| Labor Warranty |
10 years on speakers / 2 years on electronics (4 years if registered) |
1 Year |