In this review, we will be comparing A500 and YU6, two Powered Bookshelf speakers from Buchardt and Kanto. Being Powered speakers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features
of Buchardt A500 and Kanto YU6 first before getting into our more
detailed comparison.
In the following sections, we will get into more detail in order to better understand how the Buchardt A500 and Kanto YU6 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that A500 is a 3-way design whereas the YU6 is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Driver |
Buchardt A500 |
Kanto YU6 |
Driver Setup
|
3-way
|
2-way
|
Tweeter
|
0.74-inch
|
1-inch
|
Midrange
|
1 x 6-inch |
- |
Woofer
|
1 x 6-inch
|
1 x 5.25-inch
|
A500 features a 0.74" fine weave soft fabric textile aluminum waveguide Tweeter , a 6" Midrange and 1 x 6" paper Woofer with a Crossover frequency at 150Hz and 1800Hz. On the other hand, the YU6 features a 1" Silk Soft-Dome Tweeter and 1 x 5.25" Kevlar Woofer .
Frequency Response
A500 has a frequency range of 25-40k Hz whereas YU6 has a frequency range of 50-20k Hz. With a minimum frequency of 25Hz, the A500 can go significantly deeper on the low side and provide stronger bass compared to the YU6's min frequency of 50Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Buchardt A500's and Kanto YU6's external dimensions. Buchardt A500 has external dimensions of 365.0 x 180.0 x 280.0mm ( 14.4 x 7 x 11inch) whereas Kanto YU6 has external dimensions of 272.0 x 175.0 x 205.0mm ( 10.7 x 6.9 x 8.1inch) .
Buchardt A500 is clearly the larger of the two speakers. Its body is 5mm wider, 93mm taller and 75mm deeper than Kanto YU6.
Below you can see the front view size comparison of Buchardt A500 and Kanto YU6 in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Buchardt A500 is approximately 504.0cm2 / 78.1inch2 and base area of the Kanto YU6 is approximately 358.8cm2 / 55.6inch2. The A500 requires 40% more surface area than the YU6 which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Buchardt A500 weighs 9.00kg / 19.8lbs and the Kanto YU6 weighs 4.00kg / 8.8lbs. This makes the A500 125% heavier than the YU6.
Here is a comparison of how A500 and YU6's weights compare with the average, max and min weights in Powered Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Kanto YU6?
Here are the items that come with the YU6:
Remote with Batteries Power Cord Speaker Wire (16′) 3.5mm Auxiliary Cable (6.5′) 8 x Rubber Feet Manual
Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
Woofer Size |
6 inches
vs
5.25 inches
|
Larger woofer |
Low Frequency Response |
25 Hz
vs
50 Hz
|
Generates deeper bass |
High Frequency Response |
40k Hz
vs
20k Hz
|
Generates higher frequency |
USB Port |
Service Only
vs
No
|
USB port adds flexibility |
XLR Connection |
Yes
vs
No
|
Connection via XLR input |
Handheld Remote |
Yes
vs
No
|
Control the speaker by the included RC |
Height |
272mm
vs
365mm
|
Easier to fit in smaller spaces |
Base Surface Area |
358cm2 (175x205mm)
vs
504cm2 (180x280mm)
|
Takes less floor space |
Price per pair* |
540USD
vs
3850USD
|
costs less (*prices may change depending on the seller, location and time) |
USB Port |
Charge only
vs
No
|
USB port adds flexibility |
3.5mm Connection |
Yes
vs
No
|
Connection via 3.5mm AUX input |
RCA Connection |
Yes
vs
No
|
Connection via RCA input |
Phono Input |
Yes
vs
No
|
Connect your turntable directly |
Digital Input |
Optical (2)
vs
No
|
Connect digital inputs directly |
General |
Buchardt A500 |
Kanto YU6 |
Brand |
Buchardt |
Kanto |
Speaker Type |
Powered Stereo Speakers |
Powered Stereo Speakers |
Frequency Response |
25-40k Hz |
50-20k Hz |
Amplifier |
|
|
Watts RMS (Continuous) |
450-watt RMS |
100-watt RMS |
Watts Peak (Max) |
1320-watt RMS |
n/a |
Max Bit Depth |
24-bit |
24-bit |
Max Sample Rate |
192kHZ |
96 kHz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
6" |
5.25" |
Woofer Composition |
paper |
Kevlar |
Tweeter Size |
0.74" |
1" |
Tweeter Type |
aluminum waveguide |
Soft-Dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
6" |
No |
Crossover Frequency |
150Hz and 1800Hz |
n/a |
Firing Direction |
n/a |
rear |
Suggested Break-in Period |
100 hours |
n/a |
Physical Specs |
|
|
Height |
365.0mm (14.4") |
272.0mm (10.7") |
Width |
180.0mm (7.1") |
175.0mm (6.9") |
Depth |
280.0mm (11") |
205.0mm (8.1") |
Weight |
9.00kg (19.8lbs) |
4.00kg (8.8lbs) |
Enclosure |
Acoustic Suspension |
bass reflex |
Available Colors |
Black, White, Walnut |
n/a |
Mounting Bracket |
No |
No |
Grille |
Yes |
n/a |
Moisture Resistancy |
No |
No |
Connections |
|
|
Aux Inputs |
XLR |
3.5mm, RCA |
USB Port |
Service Only |
Charge only |
Phone Input |
No |
Yes |
Subwoofer Output |
n/a |
Wired |
Digital Input |
No |
Optical (2) |
HDMI Input |
No |
No |
Headphone Jack |
No |
No |
Ethernet Port |
No |
No |
Other |
|
|
Parts Warranty |
10 years on speakers / 2 years on electronics (4 years if registered) |
2 Years |
Labor Warranty |
10 years on speakers / 2 years on electronics (4 years if registered) |
2 Years |