In this review, we will be comparing CWM7.3 S2 and Studio 6 Theater, two Passive In-wall speakers from Bowers Wilkins and JBL.
Let's have a brief look at the main features
of B&W CWM7.3 S2 and JBL Studio 6 Theater first before getting into our more
detailed comparison.
B&W CWM7.3 S2 Key Specs
- 3-way Design
- 1" Soft-Dome Tweeter
- 4" Midrange
- 2 x 6" Aerofoil Woofer
- 48-28kHz Frequency Response
- 90 dB Sensitivity
- Impedance: 8ohms
- Power Range:25-200watts
- Dimensions (H x W x D): 712.0" x 9.9375" x 4.0625"( 712.0 x 253.0 x 104.0mm )
JBL Studio 6 Theater Key Specs
- 2-way Design
- 1" Horn-Loaded Tweeter
- 4 x 5.25" PolyPlas Woofer
- 65-20kHz Frequency Response
- 96 dB Sensitivity
- Impedance: 6ohms
- Power Range:10-150watts
- Dimensions (H x W x D): 643.0" x 6.2500" x 3.7500"( 643.0 x 159.0 x 96.0mm )
What size room are the B&W CWM7.3 S2 and JBL Studio 6 Theater speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
B&W CWM7.3 S2 |
JBL Studio 6 Theater |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the B&W CWM7.3 S2 and JBL Studio 6 Theater compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that CWM7.3 S2 is a 3-way design whereas the Studio 6 Theater is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
B&W CWM7.3 S2 |
JBL Studio 6 Theater |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 4-inch |
- |
|
Woofer
|
2 x 6-inch
|
4 x 5.25-inch
|
CWM7.3 S2 features a 1" Soft-Dome Tweeter , a 4" Midrange and 2 x 6" Aerofoil Woofer . On the other hand, the Studio 6 Theater features a 1" Horn-Loaded Tweeter and 4 x 5.25" PolyPlas Woofer .
Frequency Response
CWM7.3 S2 has a frequency range of 48-28kHz whereas Studio 6 Theater has a frequency range of 65-20kHz. With a minimum frequency of 48Hz, the CWM7.3 S2 can go significantly deeper on the low side and provide stronger bass compared to the Studio 6 Theater's min frequency of 65Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the In-wall class in our database.
Low Frequency
In-wall Speakers
High Frequency
In-wall Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
CWM7.3 S2 is a 8 ohms speaker compared to the Studio 6 Theater which has a nominal impedance of 6 ohms.
These two speakers also have different sensitivity levels. CWM7.3 S2 sensitivity is rated at 90 dB and the Studio 6 Theater's is rated at 96 dB. This 6 dB difference makes the JBL Studio 6 Theater a more sensitive speaker compared to B&W CWM7.3 S2, hence will play louder with the same amount of watts.
Sensitivity
In-wall Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
CWM7.3 S2 can handle a max power of 200 watts RMS from the amp the whereas Studio 6 Theater has a max power handling value of 150 watts RMS, 50 watts less than the CWM7.3 S2.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
CWM7.3 S2 features Spring posts type posts and Studio 6 Theater has a Spring posts type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare B&W CWM7.3 S2's and JBL Studio 6 Theater's external dimensions. B&W CWM7.3 S2 has external dimensions of 712.0 x 253.0 x 104.0mm ( 28.0000-inch x 9.9375-inch x 4.0625-inch) whereas JBL Studio 6 Theater has external dimensions of 643.0 x 159.0 x 96.0mm ( 25.3125-inch x 6.2500-inch x 3.7500-inch) .
B&W CWM7.3 S2 is clearly the larger of the two speakers. Its body is 94mm wider, 69mm taller and 8mm deeper than JBL Studio 6 Theater.
What's in the Box of B&W CWM7.3 S2?
Here are the items that are included inside the box of CWM7.3 S2:
In-wall loudspeakerMounting frameGrilleBaffle box2 Mounting plates (1 pre-installed)Paint shieldTwo-piece foam port plug8 Screws2 Wing-nutsHex-wrenchCutout TemplateInstallation InstructionsWarranty Information
What's in the Box of JBL Studio 6 Theater?
Here are the items that come with the Studio 6 Theater:
In-wall loudspeakerGrilleCut-Out TemplateQuick Start Guide