In this review, we will be comparing CWM362 and CP-WT150, two Passive In-wall speakers from Bowers Wilkins and Monitor Audio.
Let's have a brief look at the main features
of B&W CWM362 and Monitor Audio CP-WT150 first before getting into our more
detailed comparison.
B&W CWM362 Key Specs
- 2-way Design
- 1" Soft-Dome Tweeter
- 6" Polypropylene Woofer
- 50-30kHz Frequency Response
- 89 dB Sensitivity
- Impedance: 8ohms
- Power Range:10-80watts
- Dimensions (H x W x D): 280.0" x 7.2500" x 3.0000"( 280.0 x 185.0 x 77.0mm )
Monitor Audio CP-WT150 Key Specs
- 2-way Design
- 1" Hard-Dome Tweeter
- 5" Poly Woofer
- 75-25kHz Frequency Response
- 85 dB Sensitivity
- Impedance: 6ohms
- Power Range:20-50watts
- Dimensions (H x W x D): 326.0" x 8.1250" x 3.7500"( 326.0 x 207.0 x 96.0mm )
What size room are the B&W CWM362 and Monitor Audio CP-WT150 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
B&W CWM362 |
Monitor Audio CP-WT150 |
| Near-field |
Average |
Good |
| Small Room |
Good |
Good |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Poor |
| Very Large Room |
Bad |
No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the B&W CWM362 and Monitor Audio CP-WT150 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both CWM362 and CP-WT150 are 2-way speakers.
| Driver |
B&W CWM362 |
Monitor Audio CP-WT150 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6-inch
|
1 x 5-inch
|
CWM362 features a 1" Soft-Dome Tweeter and 1 x 6" Polypropylene Woofer . On the other hand, the CP-WT150 features a 1" Hard-Dome Tweeter and 1 x 5" Poly Woofer .
Frequency Response
CWM362 has a frequency range of 50-30kHz whereas CP-WT150 has a frequency range of 75-25kHz. With a minimum frequency of 50Hz, the CWM362 can go significantly deeper on the low side and provide stronger bass compared to the CP-WT150's min frequency of 75Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the In-wall class in our database.
Low Frequency
In-wall Speakers
High Frequency
In-wall Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
CWM362 is a 8 ohms speaker compared to the CP-WT150 which has a nominal impedance of 6 ohms.
These two speakers also have different sensitivity levels. CWM362 sensitivity is rated at 89 dB and the CP-WT150's is rated at 85 dB. This 4 dB difference makes the B&W CWM362 a more sensitive speaker compared to Monitor Audio CP-WT150, hence will play louder with the same amount of watts.
Sensitivity
In-wall Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
CWM362 can handle a max power of 80 watts RMS from the amp the whereas CP-WT150 has a max power handling value of 50 watts RMS, 30 watts less than the CWM362.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
CWM362 features Spring post type posts and CP-WT150 has a Spring post type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare B&W CWM362's and Monitor Audio CP-WT150's external dimensions. B&W CWM362 has external dimensions of 280.0 x 185.0 x 77.0mm ( 11.0000-inch x 7.2500-inch x 3.0000-inch) whereas Monitor Audio CP-WT150 has external dimensions of 326.0 x 207.0 x 96.0mm ( 12.8125-inch x 8.1250-inch x 3.7500-inch) .
Monitor Audio CP-WT150 is clearly the larger of the two speakers. Its body is 22mm wider, 46mm taller and 19mm deeper than B&W CWM362.
What's in the Box of B&W CWM362?
Here are the items that are included inside the box of CWM362:
2 In-wall loudspeakers2 Grilles2 Paint masksQuick Start GuideWall Mount Cut-Out TemplateWarranty Information
What's in the Box of Monitor Audio CP-WT150?
Here are the items that come with the CP-WT150:
In-wall speakerMagnetic grilleCosmetic scrimInstallation GuideImportant Safety InstructionsLimited Warranty/Registration CardMountingTemplate