SpeakerDecision
  • SPEAKERS by TYPE
    • Passive Bookshelf Speakers
    • Passive Floor-standing Speakers
    • Passive Center Channel Speakers
    • Passive In-wall Speakers
    • All Passive Speakers
    • Powered Subwoofers
    • Powered Stereo Speakers
  • AMPLIFIERS
  • SMART FIND

B&W 707 S3 vs Buchardt S400 MKII Comparison

x
Speaker to replace
Change

B&W 707 S3

Passive Bookshelf | 50-28k Hz

Bowers & Wilkins 707 S3
CHECK PRICE
Change
    
Buchardt S400 MKII

Passive Bookshelf | 33-40k HZ

Buchardt S400 MKII
CHECK PRICE
B&W 707 S3 B&W 707 S3
See at AMAZON
Buchardt S400 MKII Buchardt S400 MKII
See at AMAZON
B&W 707 S3
See at AMAZON
Buchardt S400 MKII
See at AMAZON
B&W 707 S3 vs Buchardt S400 MKII Speaker Comparison

In this review, we will be comparing 707 S3 and S400 MKII, two Passive Bookshelf speakers from Bowers Wilkins and Buchardt.

Let's have a brief look at the main features of B&W 707 S3 and Buchardt S400 MKII first before getting into our more detailed comparison.

B&W 707 S3 Key Specs

  • 2-way Design
  • 1" Decoupled Carbon Dome Tweeter
  • 5" Continuum Woofer
  • 50-28k Hz Frequency Response
  • 84 dB Sensitivity
  • Impedance: 8ohms
  • Power Range:30-100watts
  • Weight:6.16kg
  • Dimensions (H x W x D): 300.0" x 6.5" x 11.2"( 300.0 x 165.0 x 284.0mm )

Buchardt S400 MKII Key Specs

  • 2-way Design
  • 0.74" aluminum waveguide Tweeter
  • 6" paper Woofer
  • 33-40k HZ Frequency Response
  • 88 dB Sensitivity
  • Impedance: 4ohms
  • Power Range:40-200watts
  • Weight:7.50kg
  • Dimensions (H x W x D): 365.0" x 7" x 11"( 365.0 x 180.0 x 280.0mm )

What size room are the B&W 707 S3 and Buchardt S400 MKII speakers good for?

The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:

Listening Environment* B&W 707 S3 Buchardt S400 MKII
Near-field Average Poor
Small Room Good Average
Mid-size Room Average Good
Large Room Poor Average
Very Large Room Bad Poor

(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2. Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)

In the following sections, we will get into more detail in order to better understand how the B&W 707 S3 and Buchardt S400 MKII compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.


**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.


Drivers

Both 707 S3 and S400 MKII are 2-way speakers.

Driver B&W 707 S3 Buchardt S400 MKII
Driver Setup 2-way 2-way
Tweeter 1-inch 0.74-inch
Midrange - -
Woofer 1 x 5-inch 1 x 6-inch

707 S3 features a 1" Decoupled Carbon Dome Tweeter and 1 x 5" Continuum Woofer . On the other hand, the S400 MKII features a 0.74" fine weave soft fabric textile aluminum waveguide Tweeter and 1 x 6" paper Woofer with a Crossover frequency at 1800Hz.

Frequency Response

707 S3 has a frequency range of 50-28k Hz whereas S400 MKII has a frequency range of 33-40k HZ. With a minimum frequency of 33Hz, the S400 MKII can go significantly deeper on the low side and provide stronger bass compared to the 707 S3's min frequency of 50Hz.

Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.

Low Frequency

Bookshelf Speakers

707 S3
S400 MKII
Min
Average
Max
High Frequency

Bookshelf Speakers

B&W 707 S3
Buchardt S400 MKII
Min
Average
Max

None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.

Impedance and Sensitivity

707 S3 is a 8 ohms speaker compared to the S400 MKII which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the S400 MKII can provide this impedance level.

These two speakers also have different sensitivity levels. 707 S3 sensitivity is rated at 84 dB and the S400 MKII's is rated at 88 dB. This 4 dB difference makes the Buchardt S400 MKII a more sensitive speaker compared to B&W 707 S3, hence will play louder with the same amount of watts.

Sensitivity

Bookshelf Speakers

707 S3
S400 MKII
Min
Average
Max

Power Range

Power range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.

707 S3 can handle a max power of 200 watts RMS from the amp the whereas 707 S3 has a max power handling value of 100 watts RMS , 100 watts less than the S400 MKII.

Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters such as Impedance, sensitivity and system efficiencies.

Physical Specs

Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare B&W 707 S3's and Buchardt S400 MKII's external dimensions. B&W 707 S3 has external dimensions of 300.0 x 165.0 x 284.0mm ( 1.8-inch x 6.5-inch x 11.2-inch) whereas Buchardt S400 MKII has external dimensions of 365.0 x 180.0 x 280.0mm ( 14.4 x 7 x 11inch) .

B&W 707 S3 is 15mm narrower and 65mm shorter than Buchardt S400 MKII but it is also 4mm deeper.

Below you can see the front view size comparison of B&W 707 S3 and Buchardt S400 MKII in scale.

B&W 707 S3 vs Buchardt S400 MKII Size Comparison - Front View
Comparison image of B&W 707 S3 and Buchardt S400 MKII Size and External Dimensions

Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited. The base surface area of the B&W 707 S3 is approximately 468.6cm2 / 72.6inch2 and base area of the Buchardt S400 MKII is approximately 504.0cm2 / 78.1inch2. The 707 S3 requires 7% less surface area than the S400 MKII which gives it a small advantage on placement in tight spaces.

Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:

B&W 707 S3 vs Buchardt S400 MKII Size Comparison on a Media Console
Size Comparison image of B&W 707 S3 and Buchardt S400 MKII on a Media Console
Weight Comparison

The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The B&W 707 S3 weighs 6.16kg / 13.6lbs and the Buchardt S400 MKII weighs 7.50kg / 16.5lbs. This makes the S400 MKII 22% heavier than the 707 S3.

Here is a comparison of how 707 S3 and S400 MKII's weights compare with the average, max and min weights in Passive Bookshelf class.

Weight
All Bookshelf Speakers
B&W 707 S3
Buchardt S400 MKII
Min
Average
Max

What's in the Box of B&W 707 S3?

Here are the items that are included inside the box of 707 S3:
  • 2 Bookshelf loudspeakers
  • 2 Grilles
  • 2 Two-piece foam port plugs
  • 8 Self-adhesive rubber feet
  • 4 Jumper-straps
  • Manual
  • Bowers & Wilkins brochure
  • Warranty Information

  • Reasons to choose Bowers & Wilkins 707 S3 over Buchardt S400 MKII
    Nominal Impedance 8 ohms vs 4 ohms Less selective with amplifiers
    Height 300mm vs 365mm Easier to fit in smaller spaces
    Base Surface Area 468cm2 vs 504cm2 Takes less floor space
    Price per pair* 1799USD vs 2200USD costs less (*prices may change depending on the seller, location and time)

    Reasons to choose Buchardt S400 MKII over Bowers & Wilkins 707 S3

    Max Input Power 200 watts vs 100 watts Handle more power from your amplifier
    Sensitivity 88 dB vs 84 dB Play louder with same amount of amplification power
    Woofer Size 6 inches vs 5 inches Larger woofer
    Low Frequency Response 33 Hz vs 50 Hz Generates deeper bass
    High Frequency Response 40k Hz vs 28k Hz Generates higher frequency
    Passive Radiator one 5x8-inch vs None Increases the bass performance
    B&W 707 S3 vs Buchardt S400 MKII Specs Table
    Detailed comparison of specifications
    General Bowers & Wilkins 707 S3 Buchardt S400 MKII
    Brand Bowers Wilkins Buchardt
    Speaker Type Bookshelf speakers Bookshelf speakers
    Power Range 30-100 watts 40-200 watts
    Sensitivity 84 dB 88 dB
    Impedance 8 ohms 4 ohms
    Impedance 4.0 ohms n/a
    Frequency Response 50-28k Hz 33-40k HZ
    Drivers
    Woofer Quantity 1 1
    Woofer Size 5" 6"
    Woofer Composition Continuum paper
    Woofer Surround Material Rubber n/a
    Tweeter Size 1" 0.74"
    Tweeter Type Decoupled Carbon Dome aluminum waveguide
    Aimable Tweeter No No
    Midrange Driver No No
    Crossover Frequency n/a 1800Hz
    Firing Direction rear n/a
    Physical Specs
    Height 300.0mm (11.8") 365.0mm (14.4")
    Width 165.0mm (6.5") 180.0mm (7.1")
    Depth 284.0mm (11.2") 280.0mm (11")
    Weight 6.16kg (13.6lbs) 7.50kg (16.5lbs)
    Enclosure Bass Reflex Passive Radiator
    Finish MDF/Wood veneer n/a
    Available Colors Gloss Black,Satin White,Mocha,Rosenut Black, White, Walnut, Rosewood, Light Oak
    Mounting Bracket No No
    Recommended Stand Height 24-26" n/a
    Grille Yes Yes
    Moisture Resistancy No No
    Connections
    Biamp Inputs Yes n/a
    Other
    Parts Warranty 5 Years 10 years
    Labor Warranty 5 Years 10 years

    Most Popular Speakers
    Klipsch Reference R-51M
    Klipsch R-51M
    2-way | 93 dB | 8 ohms
    Wharfedale Elysian 2
    Wharfedale Elysian 2
    3-way | 89 dB | 4 ohms
    ELAC Debut 2.0 B6.2
    ELAC Debut 2.0 B6.2
    2-way | 87 dB | 6 ohms
    Bowers & Wilkins 606 S2 Anniversary Edition
    B&W 606 S2
    2-way | 88 dB | 8 ohms
    KEF Q150
    KEF Q150
    2-way | 86 dB | 8 ohms
    Klipsch Reference Premiere RP-500M
    Klipsch RP-500M
    2-way | 93 dB | 8 ohms
    Wharfedale EVO4.1
    Wharfedale EVO4.1
    2-way | 87 dB | 8 ohms
    Bowers & Wilkins 606
    B&W 606
    2-way | 88 dB | 8 ohms
    Copyright © 2025 by SpeakerDecision
    About Privacy Contact US Camera Decision

    Report a Correction