In this review, we will be comparing 705 S3 and L100 Classic, two Passive Bookshelf speakers from Bowers Wilkins and JBL.
Let's have a brief look at the main features
of B&W 705 S3 and JBL L100 Classic first before getting into our more
detailed comparison.
B&W 705 S3 Key Specs
- 2-way Design
- 1" Decoupled Carbon Dome Tweeter
- 6.5" Continuum Woofer
- 50-28k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 8ohms
- Power Range:30-120watts
- Weight:9.58kg
- Dimensions (H x W x D): 413.0" x 7.6" x 13.3"( 413.0 x 192.0 x 297.0mm )
JBL L100 Classic Key Specs
- 3-way Design
- 1" Dome Tweeter
- 5.25" Midrange
- 12" Pulp Woofer
- 5.25" Midrange
- 40-40k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 4ohms
- Power Range:25-200watts
- Weight:26.70kg
- Dimensions (H x W x D): 636.5" x 15.3" x 14.6"( 636.5 x 389.6 x 371.5mm )
What size room are the B&W 705 S3 and JBL L100 Classic speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
B&W 705 S3 |
JBL L100 Classic |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the B&W 705 S3 and JBL L100 Classic compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that 705 S3 is a 2-way design whereas the L100 Classic is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
B&W 705 S3 |
JBL L100 Classic |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
1 x 5.25-inch |
|
Woofer
|
1 x 6.5-inch
|
1 x 12-inch
|
705 S3 features a 1" Decoupled Carbon Dome Tweeter and 1 x 6.5" Continuum Woofer . On the other hand, the L100 Classic features a 1" Titanium Dome Tweeter , a 5.25" Midrange and 1 x 12" Pulp Woofer with a Crossover frequency at 450Hz and 3500Hz.
Frequency Response
705 S3 has a frequency range of 50-28k Hz whereas L100 Classic has a frequency range of 40-40k Hz. With a minimum frequency of 40Hz, the L100 Classic can go significantly deeper on the low side and provide stronger bass compared to the 705 S3's min frequency of 50Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
705 S3 is a 8 ohms speaker compared to the L100 Classic which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the L100 Classic can provide this impedance level.
These two speakers also have different sensitivity levels. 705 S3 sensitivity is rated at 88 dB and the L100 Classic's is rated at 90 dB. This 2 dB difference makes the JBL L100 Classic a more sensitive speaker compared to B&W 705 S3, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
705 S3 can handle a max power of 200 watts RMS from the amp the whereas 705 S3 has a max power handling value of 120 watts RMS , 80 watts less than the L100 Classic.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
705 S3 features Binding post posts which make bi-amping or bi-wiring possible. L100 Classic has a Five-way gold-plated binding posts which doesn't feature bi-amping/bi-wiring.
B&W 705 S3's Binding post terminals allows Bi-amping or bi-wiring
JBL L100 Classic's Five-way gold-plated binding posts terminals
Cabinet Type and Port Position
705 S3 has a rear firing port whereas L100 Classic has a front firing ports. JBL L100 Classic's front-firing port gives more flexibility in placement in regards to proximity to walls compared to B&W 705 S3 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare B&W 705 S3's and JBL L100 Classic's external dimensions. B&W 705 S3 has external dimensions of 413.0 x 192.0 x 297.0mm ( 16.3-inch x 7.6-inch x 13.3-inch) whereas JBL L100 Classic has external dimensions of 636.5 x 389.6 x 371.5mm ( 25.0 x 15.3 x 14.6inch) .
JBL L100 Classic is clearly the larger of the two speakers. Its body is 197.6mm wider, 223.5mm taller and 74.5mm deeper than B&W 705 S3.
Below you can see the front view size comparison of B&W 705 S3 and JBL L100 Classic in scale.
Comparison image of B&W 705 S3 and JBL L100 Classic Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the B&W 705 S3 is approximately 570.2cm2 / 88.4inch2 and base area of the JBL L100 Classic is approximately 1447.4cm2 / 224.3inch2. The 705 S3 requires 61% less surface area than the L100 Classic which gives it a small advantage on placement in tight spaces.