In this review, we will be comparing 703 S3 and Aria 926, two Passive Floor-standing speakers from Bowers Wilkins and Focal.
Let's have a brief look at the main features
of B&W 703 S3 and Focal Aria 926 first before getting into our more
detailed comparison.
B&W 703 S3 Key Specs
- 3-way Design
- 1" Tweeter
- 6" Midrange
- 2 x 6.5" Aerofoil Woofer
- 46-28k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 8ohms
- Power Range:30-200watts
- Weight:28.81kg
- Dimensions (H x W x D): 1117.0" x 7.6" x 13.9"( 1117.0 x 192.0 x 353.0mm )
Focal Aria 926 Key Specs
- 3-way Design
- 1" inverted dome Tweeter
- 6.5" Midrange
- 2 x 6.5" Flax Woofer
- 6.5" Midrange
- 45-28k Hz Frequency Response
- 91.5 dB Sensitivity
- Impedance: 8ohms
- Power Range:40-250watts
- Weight:25.00kg
- Dimensions (H x W x D): 1039.0" x 11-9/16" x 14-11/16"( 1039.0 x 294.0 x 374.0mm )
What size room are the B&W 703 S3 and Focal Aria 926 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
B&W 703 S3 |
Focal Aria 926 |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Good |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Poor |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the B&W 703 S3 and Focal Aria 926 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both 703 S3 and Aria 926 are 3-way speakers.
| Driver |
B&W 703 S3 |
Focal Aria 926 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 6-inch |
1 x 6.5-inch |
|
Woofer
|
2 x 6.5-inch
|
2 x 6.5-inch
|
703 S3 features a 1" Tweeter , a 6" Midrange and 2 x 6.5" Aerofoil Woofer . On the other hand, the Aria 926 features a 1" TNF Al/Mg inverted dome Tweeter , a 6.5" Midrange and 2 x 6.5" Flax Woofer with a Crossover frequency at 290Hz and 2,400Hz.
Frequency Response
703 S3 has a frequency range of 46-28k Hz whereas Aria 926 has a frequency range of 45-28k Hz. With a minimum frequency of 45Hz, the Aria 926 can go slightly deeper then the 703 S3's min frequency of 46Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
703 S3 and Aria 926 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. 703 S3 sensitivity is rated at 90 dB and the Aria 926's is at 91.5 dB. This 4 dB difference makes the Focal Aria 926 a more sensitive speaker compared to B&W 703 S3, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
703 S3 can handle a max power of 250 watts RMS from the amp the whereas 703 S3 has a max power handling value of 200 watts RMS , 50 watts less than the Aria 926.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
703 S3 features Binding post posts which make bi-amping or bi-wiring possible. Aria 926 has a Binding post which doesn't feature bi-amping/bi-wiring.
B&W 703 S3's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare B&W 703 S3's and Focal Aria 926's external dimensions. B&W 703 S3 has external dimensions of 1117.0 x 192.0 x 353.0mm ( 44-inch x 7.6-inch x 13.9-inch) whereas Focal Aria 926 has external dimensions of 1039.0 x 294.0 x 374.0mm ( 40-7/8 x 11-9/16 x 14-11/16inch) .
B&W 703 S3 is 102mm narrower and 21mm less deeper than Focal Aria 926 but it is also 78mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the B&W 703 S3 is approximately 677.8cm2 / 105.1inch2 and base area of the Focal Aria 926 is approximately 1099.6cm2 / 170.4inch2. The 703 S3 requires 38% less surface area than the Aria 926 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The B&W 703 S3 weighs 28.81kg / 63.4lbs and the Focal Aria 926 weighs 25.00kg / 55lbs. This makes the 703 S3 15% heavier than the Aria 926.
Here is a comparison of how 703 S3 and Aria 926's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of B&W 703 S3?
Here are the items that are included inside the box of 703 S3:
Floorstanding loudspeakerGrillePlinth (base)2 Jumper-straps (pre-installed)Two-piece foam port plug4 Rubber feet4 Spike feet4 Lock-nuts4 Screws4 Washers4 Lock washersHex-keyManualBowers & Wilkins brochureWarranty Information
What's in the Box of Focal Aria 926?
Here are the items that come with the Aria 926:
Floorstanding loudspeakerGrilleBase4 Spike feet (pre-installed in base)4 Plastic feet4 ScrewsAllen-keyHex-toolUser Manual
 Minimum Impedance |
3.1 ohms
vs
2.9 ohms
|
Very low impedance levels puts more pressure on amplifier |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Base Surface Area |
677cm2
vs
1099cm2
|
Takes less floor space |
 Max Input Power |
250 watts
vs
200 watts
|
Handle more power from your amplifier |
 Sensitivity |
92 dB
vs
88 dB
|
Play louder with same amount of amplification power |
 Low Frequency Response |
45 Hz
vs
46 Hz
|
Generates deeper bass |
 Height |
1039mm
vs
1117mm
|
Easier to fit in smaller spaces |
 Price per pair* |
4798USD
vs
5998USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Bowers & Wilkins 703 S3 |
Focal Aria 926 |
| Brand |
Bowers Wilkins |
Focal |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
30-200 watts |
40-250 watts |
| Sensitivity |
90 dB |
91.5 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
3.1 ohms |
2.9 ohms |
| Frequency Response |
46-28k Hz |
45-28k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
Aerofoil |
Flax |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
n/a |
inverted dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
6" |
6.5" |
| Crossover Frequency |
n/a |
290Hz and 2,400Hz |
| Firing Direction |
rear |
n/a |
Physical Specs |
|
|
| Height |
1117.0mm (44") |
1039.0mm (40.9") |
| Width |
192.0mm (7.6") |
294.0mm (11.6") |
| Depth |
353.0mm (13.9") |
374.0mm (14.7") |
| Weight |
28.81kg (63.4lbs) |
25.00kg (55lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Lacquer |
MDF/Glass/Leather |
| Available Colors |
Gloss Black,Satin White,Mocha,Rosenut |
Gloss Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |