In this review, we will be comparing 606 S3 and Denton 85, two Passive Bookshelf speakers from Bowers Wilkins and Wharfedale.
Let's have a brief look at the main features
of B&W 606 S3 and Wharfedale Denton 85 first before getting into our more
detailed comparison.
B&W 606 S3 Key Specs
- 2-way Design
- 1" Decoupled Double Dome Titanium Tweeter
- 6.5" Continuum Woofer
- 52-28k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 8ohms
- Power Range:30-120watts
- Weight:7.05kg
- Dimensions (H x W x D): 344.0" x 7.4" x 12.9"( 344.0 x 189.0 x 328.0mm )
Wharfedale Denton 85 Key Specs
- 2-way Design
- 1" Soft-Dome Tweeter
- 6.5" Woven Kevlar Woofer
- 45-20k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 4ohms
- Power Range:20-120watts
- Weight:9.00kg
- Dimensions (H x W x D): 342.0" x 9-7/16" x 11-15/16"( 342.0 x 240.0 x 304.0mm )
What size room are the B&W 606 S3 and Wharfedale Denton 85 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
B&W 606 S3 |
Wharfedale Denton 85 |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the B&W 606 S3 and Wharfedale Denton 85 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both 606 S3 and Denton 85 are 2-way speakers.
| Driver |
B&W 606 S3 |
Wharfedale Denton 85 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
606 S3 features a 1" Titanium Decoupled Double Dome Titanium Tweeter and 1 x 6.5" Continuum Woofer . On the other hand, the Denton 85 features a 1" woven textile Soft-Dome Tweeter and 1 x 6.5" Woven Kevlar Woofer with a Crossover frequency at 3100Hz.
Frequency Response
606 S3 has a frequency range of 52-28k Hz whereas Denton 85 has a frequency range of 45-20k Hz. With a minimum frequency of 45Hz, the Denton 85 can go significantly deeper on the low side and provide stronger bass compared to the 606 S3's min frequency of 52Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
606 S3 is a 8 ohms speaker compared to the Denton 85 which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Denton 85 can provide this impedance level.
On the other hand, they have the same sensitivity of 88 dBdB.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both 606 S3 and Denton 85 features dual binding post speaker terminals for bi-amping or bi-wiring.
B&W 606 S3's Binding post terminals allows Bi-amping or bi-wiring
Wharfedale Denton 85's Post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both 606 S3 and Denton 85 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare B&W 606 S3's and Wharfedale Denton 85's external dimensions. B&W 606 S3 has external dimensions of 344.0 x 189.0 x 328.0mm ( 13.6 x 7.4 x 12.9inch) whereas Wharfedale Denton 85 has external dimensions of 342.0 x 240.0 x 304.0mm ( 13-7/16 x 9-7/16 x 11-15/16inch) .
Wharfedale Denton 85 is 2mm shorter and 24mm less deeper than B&W 606 S3 but it is also 51mm wider.
Below you can see the front view size comparison of B&W 606 S3 and Wharfedale Denton 85 in scale.
Comparison image of B&W 606 S3 and Wharfedale Denton 85 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the B&W 606 S3 is approximately 619.9cm2 / 96.1inch2 and base area of the Wharfedale Denton 85 is approximately 729.6cm2 / 113.1inch2. The 606 S3 requires 15% less surface area than the Denton 85 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of B&W 606 S3 and Wharfedale Denton 85 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The B&W 606 S3 weighs 7.05kg / 15.5lbs and the Wharfedale Denton 85 weighs 9.00kg / 19.8lbs. This makes the Denton 85 28% heavier than the 606 S3.
Here is a comparison of how 606 S3 and Denton 85's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of B&W 606 S3?
Here are the items that are included inside the box of 606 S3:
2 Bookshelf loudspeakers 2 Grilles 2 Two-piece foam port plugs 8 Self-adhesive rubber feet 4 Jumper-straps (pre-installed) Manual Bowers & Wilkins brochure Warranty Information
What's in the Box of Wharfedale Denton 85?
Here are the items that come with the Denton 85:
2 Bookshelf loudspeakers 2 Grilles 4 Jumper-bars (pre-installed) 8 Self-adhesive rubber feet Pair of white cloth gloves User Manual
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
 High Frequency Response |
28k Hz
vs
20k Hz
|
Generates higher frequency |
 Base Surface Area |
619cm2
vs
729cm2
|
Takes less floor space |
 Minimum Impedance |
3.8 ohms
vs
3.7 ohms
|
Very low impedance levels puts more pressure on amplifier |
 Low Frequency Response |
45 Hz
vs
52 Hz
|
Generates deeper bass |
 Height |
342mm
vs
344mm
|
Easier to fit in smaller spaces |
 Price per pair* |
999USD
vs
1100USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Bowers & Wilkins 606 S3 |
Wharfedale Denton 85 |
| Brand |
Bowers Wilkins |
Wharfedale |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
30-120 watts |
20-120 watts |
| Sensitivity |
88 dB |
88 dB |
| Impedance |
8 ohms |
4 ohms |
| Impedance |
3.7 ohms |
3.8 ohms |
| Frequency Response |
52-28k Hz |
45-20k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
Continuum |
Woven Kevlar |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Decoupled Double Dome Titanium |
Soft-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
3100Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
344.0mm (13.5") |
342.0mm (13.5") |
| Width |
189.0mm (7.4") |
240.0mm (9.4") |
| Depth |
328.0mm (12.9") |
304.0mm (12") |
| Weight |
7.05kg (15.5lbs) |
9.00kg (19.8lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Vinyl |
MDF/Wood Veneer |
| Available Colors |
Matte Black, Matte White, Oak, Red Cherry |
Walnut, Mahogany, Black |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
24-26" |
24-28" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |