In this review, we will be comparing AE520 and BW 603, two Passive Floor-standing speakers from Acoustic Energy and Bowers Wilkins. Let's have a brief look at the main features
of AE520 and B&W 603 first before getting into our more
detailed comparison.
What size room are the AE520 and B&W 603 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the AE520 and B&W 603 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both AE520 and BW 603 are 3-way speakers.
| Driver |
AE520 |
B&W 603 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 5.2-inch |
1 x 6-inch |
|
Woofer
|
4 x 5-inch
|
2 x 6.5-inch
|
AE520 features a 1" carbon fibre dome with waveguide Tweeter , a 5.2" Midrange and 4 x 5" carbon fibre cone Woofer with a Crossover frequency at 373Hz and 2.8kHz. On the other hand, the BW 603 features a 1" Tweeter , a 6" Midrange and 2 x 6.5" Paper Woofer .
Frequency Response
AE520 has a frequency range of 30Hz - 28kHz whereas BW 603 has a frequency range of 48-28k Hz. With a minimum frequency of 30Hz, the AE520 can go significantly deeper on the low side and provide stronger bass compared to the BW 603's min frequency of 48Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
AE520 is a 6 ohms speaker compared to the BW 603 which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. AE520 sensitivity is rated at 90 dB and the BW 603's is rated at 88.5 dB. This 1 dB difference makes the AE520 a more sensitive speaker compared to B&W 603, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
AE520 can handle a max power of 300 watts RMS from the amp the whereas BW 603 has a max power handling value of 200 watts RMS, 100 watts less than the AE520.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Cabinet Type and Port Position
Both AE520 and BW 603 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare AE520's and B&W 603's external dimensions. AE520 has external dimensions of 1130.0 x 185.0 x 320.0mm ( 44.5 x 7.3 x 12.6inch) whereas B&W 603 has external dimensions of 985.0 x 190.0 x 340.0mm ( 38.7 x 7.4 x 13.3inch) .
AE520 is 5mm narrower and 20mm less deeper than B&W 603 but it is also 145mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the AE520 is approximately 592.0cm2 / 91.8inch2 and base area of the B&W 603 is approximately 646.0cm2 / 100.1inch2. The AE520 requires 8% less surface area than the BW 603 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The AE520 weighs 30.00kg / 66lbs and the B&W 603 weighs 24.14kg / 53.1lbs. This makes the AE520 24% heavier than the BW 603.
Here is a comparison of how AE520 and BW 603's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of B&W 603?
Here are the items that come with the BW 603:
Floorstanding loudspeaker Grille Plinith (base) 2 Jumper-straps (pre-installed) 4 Rubber feet 4 Spike feet 4 Hex-nuts 4 Screws 4 Washers 4 Lock-washers Two-piece foam port plug Hex-key Manual Bowers & Wilkins brochure Warranty Information
 Max Input Power |
300 watts
vs
200 watts
|
Handle more power from your amplifier |
 Sensitivity |
90 dB
vs
89 dB
|
Play louder with same amount of amplification power |
 Number of Woofers |
4
vs
2
|
More woofers |
| Low Frequency Response |
30 Hz
vs
48 Hz
|
Generates deeper bass |
 Base Surface Area |
592cm2 (185x320mm)
vs
646cm2 (190x340mm)
|
Takes less floor space |
 Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
| Woofer Size |
6.5 inches
vs
5 inches
|
Larger woofer |
 Height |
985mm
vs
1130mm
|
Easier to fit in smaller spaces |
| General |
Acoustic Energy AE520 |
Bowers & Wilkins 603 |
| Brand |
Acoustic Energy |
Bowers Wilkins |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
up to 300 watts |
30-200 watts |
| Sensitivity |
90 dB |
88.5 dB |
| Impedance |
6 ohms |
8 ohms |
| Frequency Response |
30Hz - 28kHz |
48-28k Hz |
Drivers |
|
|
| Woofer Quantity |
4 |
2 |
| Woofer Size |
5" |
6.5" |
| Woofer Composition |
carbon fibre cone |
Paper |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
dome with waveguide |
n/a |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
5.2" |
6" |
| Crossover Frequency |
373Hz and 2.8kHz |
n/a |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
1130.0mm (44.5") |
985.0mm (38.8") |
| Width |
185.0mm (7.3") |
190.0mm (7.5") |
| Depth |
320.0mm (12.6") |
340.0mm (13.4") |
| Weight |
30.00kg (66lbs) |
24.14kg (53.1lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
Resonance Suppression Composite (RSC) |
MDF/Vinyl |
| Available Colors |
Piano Gloss Black, Piano Gloss White, American Walnut wood veneer |
Black, White, Oak |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
n/a |
Yes |
Other |
|
|
| Parts Warranty |
|
5 Years |
| Labor Warranty |
|
5 Years |