In this review, we will be comparing AE320 and R600, two Passive Floor-standing speakers from Acoustic Energy and Polk Audio. Let's have a brief look at the main features
of AE320 and Polk R600 first before getting into our more
detailed comparison.
What size room are the AE320 and Polk R600 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the AE320 and Polk R600 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that AE320 is a 3-way design whereas the R600 is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Driver |
AE320 |
Polk R600 |
Driver Setup
|
3-way
|
2-way
|
Tweeter
|
1.1-inch
|
1-inch
|
Midrange
|
1 x 5.2-inch |
- |
Woofer
|
2 x 5.2-inch
|
2 x 6.5-inch
|
AE320 features a 1.1" aluminium dome with waveguide Tweeter , a 5.2" Midrange and 2 x 5.2" ceramic aluminium sandwich Woofer with a Crossover frequency at 380Hz and 3400Hz. On the other hand, the R600 features a 1" Pinnacle Ring Radiator Tweeter and 2 x 6.5" Polypropylene Turbine Cone Woofer with a Crossover frequency at 2700Hz.
Frequency Response
AE320 has a frequency range of 35Hz - 30kHz whereas R600 has a frequency range of 43-38k Hz. With a minimum frequency of 35Hz, the AE320 can go significantly deeper on the low side and provide stronger bass compared to the R600's min frequency of 43Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
AE320 and R600 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. AE320 sensitivity is rated at 90 dB and the R600's is at 87.5 dB. This 2 dB difference makes the AE320 a more sensitive speaker compared to Polk R600, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Cabinet Type and Port Position
AE320 has a rear firing port whereas R600 has a bottom firing ports. Polk R600's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to AE320 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare AE320's and Polk R600's external dimensions. AE320 has external dimensions of 1000.0 x 175.0 x 260.0mm ( 39.4 x 6.9 x 10.2inch) whereas Polk R600 has external dimensions of 1063.8 x 280.7 x 381.6mm ( 41.9 x 11 x 15inch) .
Polk R600 is clearly the larger of the two speakers. Its body is 105.7mm wider, 63.8mm taller and 121.6mm deeper than AE320.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the AE320 is approximately 455.0cm2 / 70.5inch2 and base area of the Polk R600 is approximately 1071.2cm2 / 166.0inch2. The AE320 requires 58% less surface area than the R600 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The AE320 weighs 26.00kg / 57.2lbs and the Polk R600 weighs 21.50kg / 47.3lbs. This makes the AE320 21% heavier than the R600.
Here is a comparison of how AE320 and R600's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Polk R600?
Here are the items that come with the R600:
Floorstanding loudspeaker
4 Outrigger feet (pre-installed)
4 Rubber feet (pre-installed)
4 Spike feet (pre-installed)
Grille
Hex-key
Owner's Manual
Online Registration
Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
Sensitivity |
90 dB
vs
88 dB
|
Play louder with same amount of amplification power |
Low Frequency Response |
35 Hz
vs
43 Hz
|
Generates deeper bass |
Height |
1000mm
vs
1063mm
|
Easier to fit in smaller spaces |
Base Surface Area |
455cm2 (175x260mm)
vs
1071cm2 (280x381mm)
|
Takes less floor space |
Woofer Size |
6.5 inches
vs
5.2 inches
|
Larger woofer |
High Frequency Response |
38k Hz
vs
30k Hz
|
Generates higher frequency |
Price per pair* |
1698USD
vs
2699USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
Acoustic Energy AE320 |
Polk Audio Reserve R600 |
Brand |
Acoustic Energy |
Polk Audio |
Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
Power Range |
up to 200 watts |
25-200 watts |
Sensitivity |
90 dB |
87.5 dB |
Impedance |
8 ohms |
8 ohms |
Impedance |
n/a |
4 ohms |
Frequency Response |
35Hz - 30kHz |
43-38k Hz |
Drivers |
|
|
Woofer Quantity |
2 |
2 |
Woofer Size |
5.2" |
6.5" |
Woofer Composition |
ceramic aluminium sandwich |
Polypropylene Turbine Cone |
Woofer Surround Material |
n/a |
Rubber |
Tweeter Size |
1.1" |
1" |
Tweeter Type |
dome with waveguide |
Pinnacle Ring Radiator |
Aimable Tweeter |
No |
No |
Midrange Driver |
5.2" |
No |
Crossover Frequency |
380Hz and 3400Hz |
2700Hz |
Firing Direction |
rear |
bottom |
Physical Specs |
|
|
Height |
1000.0mm (39.4") |
1063.8mm (41.9") |
Width |
175.0mm (6.9") |
280.7mm (11.1") |
Depth |
260.0mm (10.2") |
381.6mm (15") |
Weight |
26.00kg (57.2lbs) |
21.50kg (47.3lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
high density MDF |
MDF/Vinyl |
Available Colors |
Piano Gloss White, Piano Gloss Black, Real Walnut wood veneer |
Black, Walnut, White |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
n/a |
No |
Other |
|
|
Parts Warranty |
|
5 Years |
Labor Warranty |
|
5 Years |