In this review, we will be comparing AE300 and L200, two Passive Bookshelf speakers from Acoustic Energy and Polk Audio.
Let's have a brief look at the main features
of AE300 and Polk L200 first before getting into our more
detailed comparison.
AE300 Key Specs
- 2-way Design
- 1.1" dome with waveguide Tweeter
- 5.2" ceramic aluminium sandwich Woofer
- 45Hz - 30kHz Frequency Response
- 86 dB Sensitivity
- Impedance: 6ohms
- Power Range:up to 100watts
- Weight:6.50kg
- Dimensions (H x W x D): 300.0" x 6.9" x 10.2"( 300.0 x 175.0 x 260.0mm )
Polk L200 Key Specs
- 2-way Design
- 1" Ring Radiator Tweeter
- 6.5" Polypropylene Woofer
- 46-38k Hz Frequency Response
- 85.5 dB Sensitivity
- Impedance: 4ohms
- Power Range:30-200watts
- Weight:10.00kg
- Dimensions (H x W x D): 399.0" x 8-3/8" x 13-5/16"( 399.0 x 213.0 x 339.0mm )
What size room are the AE300 and Polk L200 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
AE300 |
Polk L200 |
| Near-field |
Average |
Poor |
| Small Room |
Good |
Average |
| Mid-size Room |
Average |
Good |
| Large Room |
Poor |
Average |
| Very Large Room |
Bad |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the AE300 and Polk L200 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both AE300 and L200 are 2-way speakers.
| Driver |
AE300 |
Polk L200 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1.1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.2-inch
|
1 x 6.5-inch
|
AE300 features a 1.1" aluminium dome with waveguide Tweeter and 1 x 5.2" ceramic aluminium sandwich Woofer with a Crossover frequency at 2800Hz. On the other hand, the L200 features a 1" Ring Radiator Tweeter and 1 x 6.5" Polypropylene Woofer with a Crossover frequency at 2600Hz.
Frequency Response
AE300 has a frequency range of 45Hz - 30kHz whereas L200 has a frequency range of 46-38k Hz. With a minimum frequency of 45Hz, the AE300 can go slightly deeper then the L200's min frequency of 46Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
AE300 is a 6 ohms speaker compared to the L200 which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the L200 can provide this impedance level.
These two speakers also have different sensitivity levels. AE300 sensitivity is rated at 86 dB and the L200's is rated at 85.5 dB.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
AE300 can handle a max power of 200 watts RMS from the amp the whereas AE300 has a max power handling value of 100 watts RMS , 100 watts less than the L200.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Cabinet Type and Port Position
Both AE300 and L200 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Polk L200 Enhanced Power Port Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare AE300's and Polk L200's external dimensions. AE300 has external dimensions of 300.0 x 175.0 x 260.0mm ( 11.4 x 6.9 x 10.2inch) whereas Polk L200 has external dimensions of 399.0 x 213.0 x 339.0mm ( 15-11/16 x 8-3/8 x 13-5/16inch) .
Polk L200 is clearly the larger of the two speakers. Its body is 38mm wider, 99mm taller and 79mm deeper than AE300.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the AE300 is approximately 455.0cm2 / 70.5inch2 and base area of the Polk L200 is approximately 722.1cm2 / 111.9inch2. The AE300 requires 37% less surface area than the L200 which gives it a small advantage on placement in tight spaces.