In this review, we will be comparing AE107 MII and R400, two Passive Center Channel speakers from Acoustic Energy and Polk Audio. Let's have a brief look at the main features
of AE107 Mark II and Polk R400 first before getting into our more
detailed comparison.
What size room are the AE107 Mark II and Polk R400 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the AE107 Mark II and Polk R400 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both AE107 MII and R400 are 2-way speakers.
Driver |
AE107 Mark II |
Polk R400 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
2 x 5.2-inch
|
2 x 6.5-inch
|
AE107 MII features a 1" fabric soft dome with waveguide Tweeter and 2 x 5.2" paper cone Woofer with a Crossover frequency at 2200Hz. On the other hand, the R400 features a 1" Pinnacle Ring Radiator Tweeter and 2 x 6.5" Polypropylene Turbine Cone Woofer with a Crossover frequency at 2500Hz.
Frequency Response
AE107 MII has a frequency range of 55Hz - 26kHz whereas R400 has a frequency range of 48-39K Hz. With a minimum frequency of 48Hz, the R400 can go significantly deeper on the low side and provide stronger bass compared to the AE107 MII's min frequency of 55Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
AE107 MII is a 6 ohms speaker compared to the R400 which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. AE107 MII sensitivity is rated at 90 dB and the R400's is rated at 89 dB. This 1 dB difference makes the AE107 Mark II a more sensitive speaker compared to Polk R400, hence will play louder with the same amount of watts.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
AE107 MII can handle a max power of 200 watts RMS from the amp the whereas AE107 MII has a max power handling value of 175 watts RMS , 25 watts less than the R400.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Cabinet Type and Port Position
Both AE107 MII and R400 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare AE107 Mark II's and Polk R400's external dimensions. AE107 Mark II has external dimensions of 175.0 x 380.0 x 250.0mm ( 6.9 x 15 x 9.8inch) whereas Polk R400 has external dimensions of 199.0 x 618.0 x 372.0mm ( 7-13/16 x 24-5/16 x 14-5/8inch) .
Polk R400 is clearly the larger of the two speakers. Its body is 238mm wider, 24mm taller and 122mm deeper than AE107 Mark II.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the AE107 Mark II is approximately 950.0cm2 / 147.3inch2 and base area of the Polk R400 is approximately 2299.0cm2 / 356.3inch2. The AE107 MII requires 59% less surface area than the R400 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The AE107 Mark II weighs 4.60kg / 10.1lbs and the Polk R400 weighs 14.91kg / 32.8lbs. This makes the R400 224% heavier than the AE107 MII.
Here is a comparison of how AE107 MII and R400's weights compare with the average, max and min weights in Passive Center Channel class.
Weight
All Center Channel Speakers
What's in the Box of Polk R400?
Here are the items that come with the R400:
Center-channel loudspeakerGrilleOwners ManualOnline Registration
Sensitivity |
90 dB
vs
89 dB
|
Play louder with same amount of amplification power |
Height |
175mm
vs
199mm
|
Easier to fit in smaller spaces |
Base Surface Area |
950cm2 (380x250mm)
vs
2299cm2 (618x372mm)
|
Takes less floor space |
Price per pair* |
399USD
vs
649USD
|
costs less (*prices may change depending on the seller, location and time) |
Max Input Power |
200 watts
vs
175 watts
|
Handle more power from your amplifier |
Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
Woofer Size |
6.5 inches
vs
5.2 inches
|
Larger woofer |
Low Frequency Response |
48 Hz
vs
55 Hz
|
Generates deeper bass |
High Frequency Response |
39k Hz
vs
26k Hz
|
Generates higher frequency |
General |
Acoustic Energy AE107 Mark II |
Polk Audio Reserve R400 |
Brand |
Acoustic Energy |
Polk Audio |
Speaker Type |
Center channel speaker |
Center channel speaker |
Power Range |
up to 175 watts |
20-200 watts |
Sensitivity |
90 dB |
89 dB |
Impedance |
6 ohms |
8 ohms |
Impedance |
n/a |
4.1 ohms |
Frequency Response |
55Hz - 26kHz |
48-39K Hz |
Drivers |
|
|
Woofer Quantity |
2 |
2 |
Woofer Size |
5.2" |
6.5" |
Woofer Composition |
paper cone |
Polypropylene Turbine Cone |
Woofer Surround Material |
n/a |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
soft dome with waveguide |
Pinnacle Ring Radiator |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
N/A" |
Crossover Frequency |
2200Hz |
2500Hz |
Firing Direction |
rear |
rear |
Physical Specs |
|
|
Height |
175.0mm (6.9") |
199.0mm (7.8") |
Width |
380.0mm (15") |
618.0mm (24.3") |
Depth |
250.0mm (9.8") |
372.0mm (14.6") |
Weight |
4.60kg (10.1lbs) |
14.91kg (32.8lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
HDF |
n/a |
Available Colors |
Walnut, Satin Black |
Black, Walnut |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
n/a |
No |
Other |
|
|
Parts Warranty |
|
5 Years |
Labor Warranty |
|
5 Years |