In this review, we will be comparing PB-3000 and Debut 2.0 SUB3010, two Powered Subwoofer speakers from SVS and ELAC. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of SVS PB-3000 and ELAC Debut 2.0 SUB3010 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the SVS PB-3000 and ELAC Debut 2.0 SUB3010 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both SVS PB-3000and ELAC Debut 2.0 SUB3010 have a single woofer setup however the SVS PB-3000's woofer is 13-inch whereas the ELAC Debut 2.0 SUB3010 features a 10-inch woofer.
Frequency Response
PB-3000 has a frequency range of 16-200 Hz whereas Debut 2.0 SUB3010 has a frequency range of 28-150 Hz. With a minimum frequency of 16Hz, the PB-3000 can go significantly deeper on the low side and provide stronger bass compared to the Debut 2.0 SUB3010's min frequency of 28Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The SVS PB-3000 has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the ELAC Debut 2.0 SUB3010 have Passive radiator type enclosure.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare SVS PB-3000's and ELAC Debut 2.0 SUB3010's external dimensions. SVS PB-3000 has external dimensions of 558.0 x 466.0 x 661.0mm ( 21-15/16 x 18-5/16 x 26inch) whereas ELAC Debut 2.0 SUB3010 has external dimensions of 374.0 x 355.0 x 383.0mm ( 14-11/16 x 13-15/16 x 15-1/16inch) .
SVS PB-3000 is clearly the larger of the two speakers. Its body is 111mm wider, 184mm taller and 278mm deeper than ELAC Debut 2.0 SUB3010.
Below you can see the front view size comparison of SVS PB-3000 and ELAC Debut 2.0 SUB3010 in scale.
Comparison image of SVS PB-3000 and ELAC Debut 2.0 SUB3010 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the SVS PB-3000 is approximately 3080.3cm2 / 477.4inch2 and base area of the ELAC Debut 2.0 SUB3010 is approximately 1359.7cm2 / 210.8inch2. The PB-3000 requires 127% more surface area than the Debut 2.0 SUB3010 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The SVS PB-3000 weighs 37.36kg / 82.2lbs and the ELAC Debut 2.0 SUB3010 weighs 14.59kg / 32.1lbs. This makes the PB-3000 156% heavier than the Debut 2.0 SUB3010.
Here is a comparison of how PB-3000 and Debut 2.0 SUB3010's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of SVS PB-3000?
Here are the items that are included inside the box of PB-3000:
Powered subwooferGrille6.5-feet AC power cordQuick Start GuideOnline Registration CardSVS brochure
What's in the Box of ELAC Debut 2.0 SUB3010?
Here are the items that come with the Debut 2.0 SUB3010:
Powered subwoofer9-feet AC power cord4 Spikes4 Hex-nutsOperating Instructions
 Woofer Size |
13 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
16 Hz
vs
28 Hz
|
Generates deeper bass |
 High Frequency Response |
200k Hz
vs
150k Hz
|
Generates higher frequency |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
 Height |
374mm
vs
558mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1359cm2
vs
3080cm2
|
Takes less floor space |
 Price per pair* |
650USD
vs
1600USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
SVS PB-3000 |
ELAC Debut 2.0 SUB3010 |
| Brand |
SVS |
ELAC |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
800 watts |
200 watts |
| Frequency Response |
16-200 Hz |
28-150 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
800-watt RMS |
200-watt RMS |
| Watts Peak (Max) |
2500-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
13" |
10" |
| Woofer Composition |
Aluminum |
Doped Paper |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
558.0mm (22") |
374.0mm (14.7") |
| Width |
466.0mm (18.3") |
355.0mm (14") |
| Depth |
661.0mm (26") |
383.0mm (15.1") |
| Weight |
37.36kg (82.2lbs) |
14.59kg (32.1lbs) |
| Enclosure |
Bass Reflex |
Passive radiator |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
1 Year |
| Labor Warranty |
5 Years |
1 Year |