In this review, we will be comparing PB-3000 and Sub 3, two Powered Subwoofer speakers from SVS and Dynaudio. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of SVS PB-3000 and Dynaudio Sub 3 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the SVS PB-3000 and Dynaudio Sub 3 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both SVS PB-3000and Dynaudio Sub 3 have a single woofer setup however the SVS PB-3000's woofer is 13-inch whereas the Dynaudio Sub 3 features a 9.5-inch woofer.
Frequency Response
PB-3000 has a frequency range of 16-200 Hz whereas Sub 3 has a frequency range of 22-175 Hz. With a minimum frequency of 16Hz, the PB-3000 can go significantly deeper on the low side and provide stronger bass compared to the Sub 3's min frequency of 22Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The SVS PB-3000 has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the Dynaudio Sub 3 have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare SVS PB-3000's and Dynaudio Sub 3's external dimensions. SVS PB-3000 has external dimensions of 558.0 x 466.0 x 661.0mm ( 21-15/16 x 18-5/16 x 26inch) whereas Dynaudio Sub 3 has external dimensions of 277.0 x 269.0 x 366.0mm ( 10-7/8 x 10-9/16 x 14-3/8inch) .
SVS PB-3000 is clearly the larger of the two speakers. Its body is 197mm wider, 281mm taller and 295mm deeper than Dynaudio Sub 3.
Below you can see the front view size comparison of SVS PB-3000 and Dynaudio Sub 3 in scale.
Comparison image of SVS PB-3000 and Dynaudio Sub 3 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the SVS PB-3000 is approximately 3080.3cm2 / 477.4inch2 and base area of the Dynaudio Sub 3 is approximately 984.5cm2 / 152.6inch2. The PB-3000 requires 213% more surface area than the Sub 3 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The SVS PB-3000 weighs 37.36kg / 82.2lbs and the Dynaudio Sub 3 weighs 10.50kg / 23.1lbs. This makes the PB-3000 256% heavier than the Sub 3.
Here is a comparison of how PB-3000 and Sub 3's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of SVS PB-3000?
Here are the items that are included inside the box of PB-3000:
Powered subwooferGrille6.5-feet AC power cordQuick Start GuideOnline Registration CardSVS brochure
What's in the Box of Dynaudio Sub 3?
Here are the items that come with the Sub 3:
Powered subwooferGrille6-feet AC power cordOwners ManualQuick Start GuideWarranty Extension Card
 Woofer Size |
13 inches
vs
9.5 inches
|
Larger woofer |
| Low Frequency Response |
16 Hz
vs
22 Hz
|
Generates deeper bass |
 High Frequency Response |
200k Hz
vs
175k Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
 Height |
277mm
vs
558mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
984cm2
vs
3080cm2
|
Takes less floor space |
| General |
SVS PB-3000 |
Dynaudio Sub 3 |
| Brand |
SVS |
Dynaudio |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
800 watts |
300 watts |
| Frequency Response |
16-200 Hz |
22-175 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
800-watt RMS |
300-watt RMS |
| Watts Peak (Max) |
2500-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
13" |
9.5" |
| Woofer Composition |
Aluminum |
Magnesium Silicate Polymer |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
50-150Hz and 60Hz/80Hz/FlatHz |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
558.0mm (22") |
277.0mm (10.9") |
| Width |
466.0mm (18.3") |
269.0mm (10.6") |
| Depth |
661.0mm (26") |
366.0mm (14.4") |
| Weight |
37.36kg (82.2lbs) |
10.50kg (23.1lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
3 Years |
| Labor Warranty |
5 Years |
3 Years |