In this review, we will be comparing PB-1000 and PSW10, two Powered Subwoofer speakers from SVS and Polk Audio. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of SVS PB-1000 and Polk PSW10 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the SVS PB-1000 and Polk PSW10 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.SVS PB-1000and Polk PSW10 have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
PB-1000 has a frequency range of 19-270 Hz whereas PSW10 has a frequency range of 40-160 Hz. With a minimum frequency of 19Hz, the PB-1000 can go significantly deeper on the low side and provide stronger bass compared to the PSW10's min frequency of 40Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both SVS PB-1000 and Polk PSW10 have Bass Reflex type cabinets. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare SVS PB-1000's and Polk PSW10's external dimensions. SVS PB-1000 has external dimensions of 480.0 x 381.0 x 532.0mm ( 18-7/8 x 15 x 20-15/16inch) whereas Polk PSW10 has external dimensions of 366.0 x 356.0 x 412.0mm ( 14-3/8 x 14 x 16-3/16inch) .
SVS PB-1000 is clearly the larger of the two speakers. Its body is 25mm wider, 114mm taller and 120mm deeper than Polk PSW10.
Below you can see the front view size comparison of SVS PB-1000 and Polk PSW10 in scale.
Comparison image of SVS PB-1000 and Polk PSW10 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the SVS PB-1000 is approximately 2026.9cm2 / 314.2inch2 and base area of the Polk PSW10 is approximately 1466.7cm2 / 227.3inch2. The PB-1000 requires 38% more surface area than the PSW10 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The SVS PB-1000 weighs 20.91kg / 46lbs and the Polk PSW10 weighs 11.82kg / 26lbs. This makes the PB-1000 77% heavier than the PSW10.
Here is a comparison of how PB-1000 and PSW10's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of SVS PB-1000?
Here are the items that are included inside the box of PB-1000:
Powered subwooferGrille (installed)6-feet AC power cordOwners ManualImportant Safety Instructions
What's in the Box of Polk PSW10?
Here are the items that come with the PSW10:
Black powered subwooferGrilleOwners ManualOnline registration card
 Low Frequency Response |
19 Hz
vs
40 Hz
|
Generates deeper bass |
 High Frequency Response |
270k Hz
vs
160k Hz
|
Generates higher frequency |
 Height |
366mm
vs
480mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1466cm2
vs
2026cm2
|
Takes less floor space |
 Price per pair* |
249USD
vs
499USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
SVS PB-1000 |
Polk Audio PSW10 |
| Brand |
SVS |
Polk Audio |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
300 watts |
50 watts |
| Frequency Response |
19-270 Hz |
40-160 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
300-watt RMS |
50-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
Fiber-composite |
Polymer Composite |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
50-160 Hz and 80 Hz |
n/a |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
480.0mm (18.9") |
366.0mm (14.4") |
| Width |
381.0mm (15") |
356.0mm (14") |
| Depth |
532.0mm (20.9") |
412.0mm (16.2") |
| Weight |
20.91kg (46lbs) |
11.82kg (26lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
3 Years |
| Labor Warranty |
5 Years |
3 Years |